ENCLO Lincoln Screen Kit User manual

www.encloscreens.com
Lincoln
Screen Kit
90 min
Approximate assembly
time for 2 screens
Scan the QR code
for an assembly video
ASSEMBLY
INSTRUCTIONS
EC18001 CEDAR COLOR
EC18002 GRAY COLOR
VER. 081921

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
jCheck the inside of the larger pieces in your box for other
materials packed inside.
jWhen assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
jWe recommend an area approximately 5’x 8’for unobstructed
assembling.
jYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and
handling of this product, occasionally problems occur. If you discover
any missing, damaged or defective parts, please visit our website to
order replacement parts. If you experience any further trouble with
your product, please contact our customer service department.
nychgroup.com/parts
[e-mail]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-5pm EST.
If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number
EC18001 (CEDAR COLOR) / EC18002 (GRAY COLOR) and the specic
part name which can be found on the next page. It is helpful if you can
provide the batch lot which is a stamped number on the end of the
box.
If you are having problems with the assembly or installation of this
product, we are happy to assist you with the process, so please give
us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please allow
us to help resolve your issues rst. If you still decide to return the
product, you will need to initiate the return from the company you
originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO RETURN?
IMPORTANT

www.encloscreens.com 3
ASSEMBLY INSTRUCTIONS EC18001 / EC18002
Post Board (28)
⁄" x 3" x 41 ½"
1” Stainless Steel
Screw (16)
Post Anchor (4)
1" x 1" x 24"
Left Post (2)
1 ⁄" x 1 ⁄" x 42 ¾"
Right Post (2)
1 ⁄" x 1 ⁄" x 42 ¾"
Post Cap (4)
STEP 1: LAY OUT MATERIALS
Joiner Clip (4)
Top viewTop view
A B
D
F
G
C
E

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
STEP 2: INSERT PRIVACY BOARD
bOrient Left Post (C) and
Right Post (D) as shown
below.
1. Insert a Privacy Board
(F) into the grooves of
the left and right post.
2. Slide the privacy board
until the bottom of the
board is 2 ¾" above the
bottom of the post.
STEP 2.1 STEP 2.2
D
F
C
Top of Post
2
1
2 ¾ in
Preview
4 ½ in
2 ½ in
Align

www.encloscreens.com 5
ASSEMBLY INSTRUCTIONS EC18001 / EC18002
STEP 3: ASSEMBLE THE FIRST SCREEN
1. Flip the screen so that the bottom of the posts are facing up. Insert
(2) Post Anchors (E), into the posts until the pre-drilled hole in the
anchors and posts align as shown below.
2. Drive (4) 1" Stainless Steel Screws (G) into the pre-drilled holes in the
posts to secure the privacy boards and post anchors.
bInsert 13 additional privacy
boards into the post channels.
STEP 3.1
STEP 3.2
E
Align
Top of Post
Preview
Preview
21
G
G

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
1. Move the screen to its nal location and identify where the posts are located.
Attempt to push the unit into the ground as illustrated.
2. If your ground is too hard, loosen the top 6" or 7" of the ground with a claw
hammer as illustrated.
3. Add water to loosened soil.
4. Use a block of wood to protect the top of the post and gently hammer the
post into the ground.
bRepeat Steps 2-3 in
order to assemble
the second screen.
3
2
STEP 4: ASSEMBLE THE SECOND SCREEN
STEP 5: INSTALLING THE SCREEN IN THE GROUND
STEP 4.1
STEP 5.1
1Push down on the
top of the posts
with both hands
4

www.encloscreens.com 7
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
Optional in hard ground: If your ground is too hard, or you have more than 3 or 4
panels to install, please consider these options:
1.
($15-$20 on Amazon.com).
2.
with water as illustrated.
3. Push the panel posts into the holes.
1
1
2 3
STEP 5.2

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
bIf your ground is
really hard, you
may need to dig a
hole 8" in diameter
and 14" deep to
accommodate one
post from each
panel into the same
hole.
bLevel the screen as
necessary, backll
excavated dirt, and
tamp if needed.
STEP 5.3
STEP 5.4
14"
8"

www.encloscreens.com 9
ASSEMBLY INSTRUCTIONS EC18001 / EC18002
STEP 6: CONNECT THE SCREENS
STEP 6.1
1. Straight Line Application: Connect the screens as shown
below using Joiner Clips (B) and 1" Stainless Steel Screws.
2. Corner Application: Connect the screens as shown below
using Joiner Clips (B) and 1" Stainless Steel Screws.
B
B
B
B
2
1

www.encloscreens.com
10
ASSEMBLY INSTRUCTIONSEC18001 / EC18002
STEP 7: INSTALL POST CAPS
bInstall Post Caps (A) into the
top of the posts.
STEP 7.1
A

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
ASSEMBLY
INSTRUCTIONS
EC18001 CEDAR COLOR
EC18002 GRAY COLOR
VER. 081921