Endon Studio Plug-in Wall Light User manual

Studio Plug-in Wall Light
Safety Warnings
INSTRUCTION MANUAL
• This product is only suitable for connection to a 240V~50Hz supply in accordance with current IEE wiring
regulations.Itisforindooruseonly,andnotsuitableforabathroomlocation.
• ThisttingisaClassII,DoubleInsulatedproduct anddoesnotrequireanEarth.LiveorNeutralmustnot
beconnectedtoEarth.
• Donotplugintothemainsuntilyourlampisfullyassembled.
• Nevertbulbsofahigherwattagethanthosespeciedonthelabel,asthesemaydamagethetting.
• Thelampmustbeprotectedbya3ampfuseinthemainsplug.
• Ifthemainscablebecomesdamageditmustonlybereplacedbyatechnicallycompetent,qualiedperson.
• Ifyouareinanydoubtaboutyourcompetencepleaseconsultaqualiedelectrician.
• Thisproductcontainsdelicateparts–takecareduringhandlingandmaintenancetoavoidbreakage.
• Ifanymodicationismadeitwillinvalidatethewarrantyandmayrendertheproductunsafe
EndonLighting,LS90SE
Assembly/ User Instructions
Before you start
Pleasereadtheseinstructionscarefullybeforettingandretainforreference.Checkthepackagingandmake
surethatyouhavealltherequiredparts.Followeachassemblystepinordertopreventincorrectassembly.
Ensurethattheproductisfullyassembledasillustratedbeforeuse.
These assembly diagrams are intended as a guide – if in doubt consult a qualied electrician.
Care Information
Allow10minutestocoolbeforereplacing,adjustingorcleaning.
Cleanwithadryclothonly.Donotuseliquidorabrasivecleanersonthisproduct.
79382StudioW20190613
ClassIIPlugWiringDiagram
E
L
N
FUSE
Fuse
(3AMP)
Blue
(Neutral)
Brown
(Live)
The Light pack contains:
Lighttting
Fixingpack.
The following tools may be required:
Selectionofcrossandatheadscrewdrivers.
Electricdrillandassorteddrillbits.
1. Donotattempttopluginorusethisproductuntilithasbeenfullyassembled.Disconnectfrommainsduring
assemblyormaintenance.
2. Decideofthepositionofthislighttting..Usethebackplate(1)asatemplatetomarkthescrewholes.
Makethescrewholesandsecuretothewallwithappropriatescrewxings(2).
3. Installthebulb(3).Donotinstallabulbwithagreaterwattageordi󰀨erentshapethanspeciedonthelabel.
IMPORTANT: Children can become entangled in loose cable. Ensure excessive loops of cable are secured
against the wall using suitable ttings, such as cable clips(not supplied). Do not use this product in
children’s bedrooms.
4. Plugin,andoperatethelampholderswitch(4)toturnyourlampon.
If your lamp will not illuminate, please check the bulb, the 3 amp fuse in the plug and ultimately check
the relevant fuse in your Fuse Box. If unsuccessful please consult your Retailer.

79382StudioW20190613
EndonLighting,LS90SE
Assembly/ User Instructions Continued
1
2
3
4