Endress+Hauser Proline Promag D 400 HART User manual

Products Solutions Services
OperatingйInstructions
Proline Promag D 400
HART
Electromagneticйflowmeter
BA01061D/06/EN/03.14
71245449
Validйasйofйversion
01.00.zzйсDeviceйfirmware)

ProlineйPromagйDй400йHART
2 Endress+Hauser
• Makeйsureйtheйdocumentйisйstoredйinйaйsafeйplaceйsuchйthatйitйisйalwaysйavailableйwhen
workingйonйorйwithйtheйdevice.
• Toйavoidйdangerйtoйindividualsйorйtheйfacility,йreadйtheй"Basicйsafetyйinstructions"йsection
carefully,йasйwellйasйallйotherйsafetyйinstructionsйinйtheйdocumentйthatйareйspecificйto
workingйprocedures.
• Theйmanufacturerйreservesйtheйrightйtoйmodifyйtechnicalйdataйwithoutйpriorйnotice.йYour
Endress+HauserйSalesйCenterйwillйsupplyйyouйwithйcurrentйinformationйandйupdatesйto
theseйInstructions.

ProlineйPromagйDй400йHART Tableйofйcontents
Endress+Hauser 3
Table of contents
1 Document information .............. 6
1.1 Documentйfunction ..................... 6
1.2 Symbolsйused .......................... 6
1.2.1 Safetyйsymbols .................. 6
1.2.2 Electricalйsymbols ................ 6
1.2.3 Toolйsymbols .................... 7
1.2.4 Symbolsйforйcertainйtypesйof
information .................... 7
1.2.5 Symbolsйinйgraphics ............... 7
1.3 Documentation ........................ 8
1.3.1 Standardйdocumentation ........... 8
1.3.2 Supplementaryйdevice-dependent
documentation .................. 8
1.4 Registeredйtrademarks ................... 8
2 Basic safety instructions ............ 9
2.1 Requirementsйforйtheйpersonnel ............ 9
2.2 Designatedйuse ........................ 9
2.3 Workplaceйsafety ...................... 10
2.4 Operationalйsafety ..................... 10
2.5 Productйsafety ........................ 10
2.6 ITйsecurity ........................... 11
3 Product description ................ 12
3.1 Productйdesign ........................ 12
4 Incoming acceptance and product
identification ..................... 13
4.1 Incomingйacceptance ................... 13
4.2 Productйidentification ................... 13
4.2.1 Transmitterйnameplate ........... 14
4.2.2 Sensorйnameplate ............... 15
4.2.3 Symbolsйonйmeasuringйdevice ...... 15
5 Storage and transport ............. 16
5.1 Storageйconditions ..................... 16
5.2 Transportingйtheйproduct ................ 16
5.3 Packagingйdisposal ..................... 17
6 Mounting ......................... 17
6.1 Installationйconditions .................. 17
6.1.1 Mountingйposition ............... 17
6.1.2 Requirementsйfromйenvironmentйand
process ....................... 19
6.1.3 Specialйmountingйinstructions ...... 21
6.2 Mountingйtheйmeasuringйdevice ........... 21
6.2.1 Requiredйtools .................. 21
6.2.2 Preparingйtheйmeasuringйdevice ..... 21
6.2.3 Mountingйtheйsensor ............. 22
6.2.4 Mountingйtheйtransmitterйofйthe
remoteйversion ................. 25
6.2.5 Turningйtheйtransmitterйhousing .... 26
6.2.6 Turningйtheйdisplayйmodule ........ 28
6.3 Post-installationйcheck .................. 29
7 Electrical connection .............. 30
7.1 Connectionйconditions .................. 30
7.1.1 Requiredйtools .................. 30
7.1.2 Requirementsйforйconnectingйcable ... 30
7.1.3 Terminalйassignment ............. 32
7.1.4 Preparingйtheйmeasuringйdevice ..... 33
7.1.5 Preparingйtheйconnectingйcableйfor
theйremoteйversion .............. 34
7.2 Connectingйtheйmeasuringйdevice .......... 35
7.2.1 Connectingйtheйtransmitter ........ 36
7.2.2 Connectingйtheйremoteйversion ..... 36
7.2.3 Ensuringйpotentialйequalization ..... 38
7.3 Specialйconnectionйinstructions ............ 40
7.3.1 Connectionйexamples ............. 40
7.4 Ensuringйtheйdegreeйofйprotection .......... 40
7.4.1 DegreeйofйprotectionйIP66/67,йType
4Xйenclosure ................... 40
7.5 Post-connectionйcheck .................. 40
8 Operation options ................. 42
8.1 Overviewйofйoperationйoptions ............ 42
8.2 Structureйandйfunctionйofйtheйoperating
menu .............................. 43
8.2.1 Structureйofйtheйoperatingйmenu .... 43
8.2.2 Operatingйphilosophy ............ 44
8.3 Accessйtoйtheйoperatingйmenuйviaйtheйlocal
display ............................. 45
8.3.1 Operationalйdisplay .............. 45
8.3.2 Navigationйview ................ 47
8.3.3 Editingйview ................... 49
8.3.4 Operatingйelements .............. 50
8.3.5 Openingйtheйcontextйmenu ......... 51
8.3.6 Navigatingйandйselectingйfromйlist ... 53
8.3.7 Callingйtheйparameterйdirectly ...... 53
8.3.8 Callingйupйhelpйtext .............. 54
8.3.9 Changingйtheйparameters ......... 55
8.3.10 Userйrolesйandйrelatedйaccess
authorization .................. 56
8.3.11 Disablingйwriteйprotectionйviaйaccess
code ......................... 56
8.3.12 Enablingйandйdisablingйtheйkeypad
lock ......................... 56
8.4 AccessйtoйtheйoperatingйmenuйviaйtheйWeb
browser ............................. 57
8.4.1 Functionйrange ................. 57
8.4.2 Prerequisites ................... 57
8.4.3 Establishingйaйconnection ......... 58
8.4.4 Loggingйon .................... 59
8.4.5 Userйinterface .................. 59
8.4.6 DisablingйtheйWebйserver .......... 60

Tableйofйcontents ProlineйPromagйDй400йHART
4 Endress+Hauser
8.4.7 Loggingйout .................... 60
8.5 Accessйtoйtheйoperatingйmenuйviaйthe
operatingйtool ........................ 61
8.5.1 Connectingйtheйoperatingйtool ...... 61
8.5.2 FieldйXpertйSFX350,йSFX370 ....... 62
8.5.3 FieldCare ..................... 62
8.5.4 AMSйDeviceйManager ............ 63
8.5.5 SIMATICйPDM .................. 63
8.5.6 FieldйCommunicatorй475 .......... 64
9 System integration ................ 65
9.1 Overviewйofйdeviceйdescriptionйfiles ......... 65
9.1.1 Currentйversionйdataйforйtheйdevice ... 65
9.1.2 Operatingйtools ................. 65
9.2 MeasuredйvariablesйviaйHARTйprotocol ...... 65
9.3 Otherйsettings ........................ 66
9.3.1 Burstйmodeйfunctionalityйin
accordanceйwithйHARTй7
Specification ................... 66
10 Commissioning .................... 69
10.1 Functionйcheck ....................... 69
10.2 Switchingйonйtheйmeasuringйdevice ......... 69
10.3 Settingйtheйoperatingйlanguage ............ 69
10.4 Configuringйtheйmeasuringйdevice .......... 69
10.4.1 Definingйtheйtagйname ............ 70
10.4.2 Configuringйtheйstatusйinput ....... 71
10.4.3 Configuringйtheйcurrentйoutput ..... 72
10.4.4 Configuringйtheйpulse/frequency/
switchйoutput .................. 73
10.4.5 Configuringйtheйlocalйdisplay ....... 80
10.4.6 ConfiguringйtheйHARTйinput ....... 82
10.4.7 Configuringйtheйoutput
conditioning ................... 83
10.4.8 Configuringйtheйlowйflowйcutйoff ..... 85
10.4.9 Configuringйemptyйpipeйdetection ... 87
10.5 Advancedйsettings ..................... 88
10.5.1 Settingйtheйsystemйunits .......... 89
10.5.2 Carryingйoutйaйsensorйadjustment .... 90
10.5.3 Configuringйtheйtotalizer .......... 90
10.5.4 Carryingйoutйadditionalйdisplay
configurations .................. 91
10.6 Simulation ........................... 93
10.7 Protectingйsettingsйfromйunauthorized
access .............................. 95
10.7.1 Writeйprotectionйviaйaccessйcode ..... 95
10.7.2 Writeйprotectionйviaйwriteйprotection
switch ........................ 96
11 Operation ......................... 98
11.1 Readingйdeviceйlockingйstatus ............. 98
11.2 Adjustingйtheйoperatingйlanguage .......... 98
11.3 Configuringйtheйdisplay ................. 98
11.4 Readingйmeasuredйvalues ................ 98
11.4.1 Processйvariables ................ 98
11.4.2 Totalizer ...................... 99
11.4.3 Inputйvalues ................... 99
11.4.4 Outputйvalues .................. 99
11.5 Adaptingйtheйmeasuringйdeviceйtoйtheйprocess
conditions .......................... 100
11.6 Performingйaйtotalizerйreset ............. 100
11.7 Showingйdataйlogging ................. 101
12 Diagnostics and troubleshooting .. 103
12.1 Generalйtroubleshooting ................ 103
12.2 Diagnosticйinformationйviaйlightйemitting
diodes ............................. 104
12.2.1 Transmitter ................... 104
12.3 Diagnosticйinformationйonйlocalйdisplay ..... 106
12.3.1 Diagnosticйmessage ............. 106
12.3.2 Callingйupйremedialйmeasures ..... 108
12.4 DiagnosticйinformationйinйtheйWebйbrowser .109
12.4.1 Diagnosticйoptions .............. 109
12.4.2 Callingйupйremedyйinformation .... 109
12.5 DiagnosticйinformationйinйFieldCare ....... 110
12.5.1 Diagnosticйoptions .............. 110
12.5.2 Callingйupйremedyйinformation .... 111
12.6 Adaptingйtheйdiagnosticйinformation ...... 111
12.6.1 Adaptingйtheйdiagnosticйbehavior ... 111
12.6.2 Adaptingйtheйstatusйsignal ........ 111
12.7 Overviewйofйdiagnosticйinformationй ....... 112
12.8 Pendingйdiagnosticйevents .............. 115
12.9 Diagnosticйlist ....................... 115
12.10 Eventйlogbook ....................... 116
12.10.1 Eventйhistory .................. 116
12.10.2 Filteringйtheйeventйlogbook ....... 117
12.10.3 Overviewйofйinformationйevents .... 117
12.11 Resettingйtheйmeasuringйdevice .......... 118
12.12 Deviceйinformation ................... 118
12.13 Firmwareйhistory ..................... 120
13 Maintenance .................... 121
13.1 Maintenanceйtasks .................... 121
13.1.1 Exteriorйcleaning ............... 121
13.1.2 Interiorйcleaning ............... 121
13.1.3 Replacingйseals ................ 121
13.2 Measuringйandйtestйequipment ........... 121
13.3 Endress+Hauserйservices ............... 121
14 Repair ........................... 122
14.1 Generalйnotes ....................... 122
14.2 Spareйparts ......................... 122
14.3 Endress+Hauserйservices ............... 122
14.4 Return ............................. 122
14.5 Disposal ........................... 122
14.5.1 Removingйtheйmeasuringйdevice .... 122
14.5.2 Disposingйofйtheйmeasuringйdevice .. 123
15 Accessories ...................... 124
15.1 Device-specificйaccessories .............. 124
15.1.1 Forйtheйtransmitter ............. 124
15.1.2 Forйtheйsensor ................. 124
15.2 Communication-specificйaccessories ....... 124

ProlineйPromagйDй400йHART Tableйofйcontents
Endress+Hauser 5
15.3 Service-specificйaccessories .............. 125
15.4 Systemйcomponents ................... 125
16 Technical data ................... 126
16.1 Application ......................... 126
16.2 Functionйandйsystemйdesign ............. 126
16.3 Input .............................. 126
16.4 Output ............................ 128
16.5 Powerйsupply ........................ 130
16.6 Performanceйcharacteristics ............. 131
16.7 Installation ......................... 133
16.8 Environment ........................ 133
16.9 Process ............................ 133
16.10 Mechanicalйconstruction ............... 134
16.11 Operability ......................... 139
16.12 Certificatesйandйapprovals .............. 141
16.13 Applicationйpackages .................. 142
16.14 Accessories ......................... 142
16.15 Supplementaryйdocumentation ........... 143
17 Appendix ........................ 144
17.1 Overviewйofйtheйoperatingйmenu .......... 144
17.1.1 Mainйmenu ................... 144
17.1.2 "Operation"йmenu ............... 144
17.1.3 "Setup"йmenu .................. 145
17.1.4 "Diagnostics"йmenu .............. 149
17.1.5 "Expert"йmenu ................. 153
Index ................................. 167

Documentйinformation ProlineйPromagйDй400йHART
6 Endress+Hauser
1 Document information
1.1 Document function
TheseйOperatingйInstructionsйcontainйallйtheйinformationйthatйisйrequiredйinйvariousйphases
ofйtheйlifeйcycleйofйtheйdevice:йfromйproductйidentification,йincomingйacceptanceйand
storage,йtoйmounting,йconnection,йoperationйandйcommissioningйthroughйto
troubleshooting,йmaintenanceйandйdisposal.
1.2 Symbols used
1.2.1 Safety symbols
Symbol Meaning
DANGER
DANGER!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйwillйresultйin
seriousйorйfatalйinjury.
WARNING
WARNING!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйin
seriousйorйfatalйinjury.
CAUTION
CAUTION!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйin
minorйorйmediumйinjury.
NOTICE
NOTE!
Thisйsymbolйcontainsйinformationйonйproceduresйandйotherйfactsйwhichйdoйnotйresultйin
personalйinjury.
1.2.2 Electrical symbols
Symbol Meaning
Direct current
AйterminalйtoйwhichйDCйvoltageйisйappliedйorйthroughйwhichйdirectйcurrentйflows.
Alternating current
Aйterminalйtoйwhichйalternatingйvoltageйisйappliedйorйthroughйwhichйalternatingйcurrentйflows.
Direct current and alternating current
• AйterminalйtoйwhichйalternatingйvoltageйorйDCйvoltageйisйapplied.
• Aйterminalйthroughйwhichйalternatingйcurrentйorйdirectйcurrentйflows.
Ground connection
Aйgroundedйterminalйwhich,йasйfarйasйtheйoperatorйisйconcerned,йisйgroundedйviaйaйgrounding
system.
Protective ground connection
Aйterminalйwhichйmustйbeйconnectedйtoйgroundйpriorйtoйestablishingйanyйotherйconnections.
Equipotential connection
Aйconnectionйthatйhasйtoйbeйconnectedйtoйtheйplantйgroundingйsystem:йThisйmayйbeйaйpotential
equalizationйlineйorйaйstarйgroundingйsystemйdependingйonйnationalйorйcompanyйcodesйofйpractice.

ProlineйPromagйDй400йHART Documentйinformation
Endress+Hauser 7
1.2.3 Tool symbols
Symbol Meaning
Torxйscrewdriver
Phillipsйheadйscrewdriver
Open-endedйwrench
1.2.4 Symbols for certain types of information
Symbol Meaning
Permitted
Indicatesйprocedures,йprocessesйorйactionsйthatйareйpermitted.
Preferred
Indicatesйprocedures,йprocessesйorйactionsйthatйareйpreferred.
Forbidden
Indicatesйprocedures,йprocessesйorйactionsйthatйareйforbidden.
Tip
Indicatesйadditionalйinformation.
Reference to documentation
Refersйtoйtheйcorrespondingйdeviceйdocumentation.
Reference to page
Refersйtoйtheйcorrespondingйpageйnumber.
Reference to graphic
Refersйtoйtheйcorrespondingйgraphicйnumberйandйpageйnumber.
,… ,
Series of steps
Result of a sequence of actions
Help in the event of a problem
Visual inspection
1.2.5 Symbols in graphics
Symbol Meaning
1, 2, 3,... Itemйnumbers
,… ,
Seriesйofйsteps
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
Flowйdirection
-
Hazardous area
Indicatesйaйhazardousйarea.
.
Safe area (non-hazardous area)
Indicatesйtheйnon-hazardousйarea.

Documentйinformation ProlineйPromagйDй400йHART
8 Endress+Hauser
1.3 Documentation
ForйanйoverviewйofйtheйscopeйofйtheйassociatedйTechnicalйDocumentation,йreferйtoйthe
following:
• TheйCD-ROMйprovidedйforйtheйdeviceйсdependingйonйtheйdeviceйversion,йtheйCD-ROM
mightйnotйbeйpartйofйtheйdeliveryк)
• TheйW@M Device Viewer :йEnterйtheйserialйnumberйfromйtheйnameplate
сwww.endress.com/deviceviewer)
• TheйEndress+Hauser Operations App:йEnterйtheйserialйnumberйfromйtheйnameplate
orйscanйtheй2-DйmatrixйcodeйсQRйcode)йonйtheйnameplate.
Forйaйdetailedйlistйofйtheйindividualйdocumentsйalongйwithйtheйdocumentationйcode
1.3.1 Standard documentation
Document type Purpose and content of the document
TechnicalйInformation Planning aid for your device
Theйdocumentйcontainsйallйtheйtechnicalйdataйonйtheйdeviceйandйprovides
anйoverviewйofйtheйaccessoriesйandйotherйproductsйthatйcanйbeйorderedйfor
theйdevice.
BriefйOperatingйInstructions Guide that takes you quickly to the 1st measured value
TheйBriefйOperatingйInstructionsйcontainйallйtheйessentialйinformation
fromйincomingйacceptanceйtoйinitialйcommissioning.
1.3.2 Supplementary device-dependent documentation
Additionalйdocumentsйareйsuppliedйdependingйonйtheйdeviceйversionйordered:йAlways
complyйstrictlyйwithйtheйinstructionsйinйtheйsupplementaryйdocumentation.йThe
supplementaryйdocumentationйisйanйintegralйpartйofйtheйdeviceйdocumentation.
1.4 Registered trademarks
HART®
RegisteredйtrademarkйofйtheйHARTйCommunicationйFoundation,йAustin,йUSA
Microsoft®
RegisteredйtrademarkйofйtheйMicrosoftйCorporation,йRedmond,йWashington,йUSA
Applicator®, FieldCare®, Field XpertTM, HistoROM®, Heartbeat TechnologyTM
Registeredйorйregistration-pendingйtrademarksйofйtheйEndress+HauserйGroup

ProlineйPromagйDй400йHART Basicйsafetyйinstructions
Endress+Hauser 9
2 Basic safety instructions
2.1 Requirements for the personnel
Theйpersonnelйforйinstallation,йcommissioning,йdiagnosticsйandйmaintenanceйmustйfulfill
theйfollowingйrequirements:
‣Trained,йqualifiedйspecialistsйmustйhaveйaйrelevantйqualificationйforйthisйspecificйfunction
andйtask
‣Areйauthorizedйbyйtheйplantйowner/operator
‣Areйfamiliarйwithйfederal/nationalйregulations
‣Beforeйbeginningйwork,йtheйspecialistйstaffйmustйhaveйreadйandйunderstoodйthe
instructionsйinйtheйOperatingйInstructionsйandйsupplementaryйdocumentationйasйwellйas
inйtheйcertificatesйсdependingйonйtheйapplication)
‣Followingйinstructionsйandйbasicйconditions
Theйoperatingйpersonnelйmustйfulfillйtheйfollowingйrequirements:
‣Beingйinstructedйandйauthorizedйaccordingйtoйtheйrequirementsйofйtheйtaskйbyйthe
facilityрsйowner-operator
‣FollowingйtheйinstructionsйinйtheseйOperatingйInstructions
2.2 Designated use
Application and media
TheйmeasuringйdeviceйdescribedйinйtheseйInstructionsйisйintendedйonlyйforйflow
measurementйofйliquidsйwithйaйminimumйconductivityйofй5йμS/cm.
Dependingйonйtheйversionйordered,йtheйmeasuringйdeviceйcanйalsoйmeasureйpotentially
explosive,йflammable,йpoisonousйandйoxidizingйmedia.
Measuringйdevicesйforйuseйinйhazardousйareas,йinйhygienicйapplicationsйorйinйapplications
whereйthereйisйanйincreasedйriskйdueйtoйprocessйpressure,йareйlabeledйaccordinglyйonйthe
nameplate.
Toйensureйthatйtheйmeasuringйdeviceйremainsйinйproperйconditionйforйtheйoperationйtime:
‣Onlyйuseйtheйmeasuringйdeviceйinйfullйcomplianceйwithйtheйdataйonйtheйnameplateйand
theйgeneralйconditionsйlistedйinйtheйOperatingйInstructionsйandйsupplementary
documentation.
‣Basedйonйtheйnameplate,йcheckйwhetherйtheйorderedйdeviceйisйpermittedйforйthe
intendedйuseйinйtheйhazardousйareaйсe.g.йexplosionйprotection,йpressureйvesselйsafety).
‣Useйtheйmeasuringйdeviceйonlyйforйmediaйagainstйwhichйtheйprocess-wettedйmaterials
areйadequatelyйresistant.
‣Ifйtheйmeasuringйdeviceйisйnotйoperatedйatйatmosphericйtemperature,йcomplianceйwith
theйrelevantйbasicйconditionsйspecifiedйinйtheйassociatedйdeviceйdocumentationйis
absolutelyйessential:й"Documentation"йsectionйсййй8).
Incorrect use
Non-designatedйuseйcanйcompromiseйsafety.йTheйmanufacturerйisйnotйliableйforйdamage
causedйbyйimproperйorйnon-designatedйuse.
฀WARNING
Danger of breakage of the sensor due to corrosive or abrasive fluids!
‣Verifyйtheйcompatibilityйofйtheйprocessйfluidйwithйtheйsensorйmaterial.
‣Ensureйtheйresistanceйofйallйfluid-wettedйmaterialsйinйtheйprocess.
‣Observeйtheйspecifiedйpressureйandйtemperatureйrange.
Verificationйforйborderlineйcases:
‣Forйspecialйfluidsйandйfluidsйforйcleaning,йEndress+Hauserйisйgladйtoйprovideйassistance
inйverifyingйtheйcorrosionйresistanceйofйfluid-wettedйmaterials,йbutйdoesйnotйacceptйany

Basicйsafetyйinstructions ProlineйPromagйDй400йHART
10 Endress+Hauser
warrantyйorйliabilityйasйminuteйchangesйinйtheйtemperature,йconcentrationйorйlevelйof
contaminationйinйtheйprocessйcanйalterйtheйcorrosionйresistanceйproperties.
Residual risks
Theйexternalйsurfaceйtemperatureйofйtheйhousingйcanйincreaseйbyйmax.й10йKйdueйtoйthe
powerйconsumptionйofйtheйelectronicйcomponents.йHotйprocessйfluidsйpassingйthroughйthe
measuringйdeviceйwillйfurtherйincreaseйtheйsurfaceйtemperatureйofйtheйhousing.йTheйsurface
ofйtheйsensor,йinйparticular,йcanйreachйtemperaturesйwhichйareйcloseйtoйtheйfluid
temperature.
Possibleйburnйhazardйdueйtoйfluidйtemperaturesк
‣Forйelevatedйfluidйtemperature,йensureйprotectionйagainstйcontactйtoйpreventйburns.
2.3 Workplace safety
Forйworkйonйandйwithйtheйdevice:
‣Wearйtheйrequiredйpersonalйprotectiveйequipmentйaccordingйtoйfederal/national
regulations.
Forйweldingйworkйonйtheйpiping:
‣Doйnotйgroundйtheйweldingйunitйviaйtheйmeasuringйdevice.
Ifйworkingйonйandйwithйtheйdeviceйwithйwetйhands:
‣Itйisйrecommendedйtoйwearйglovesйonйaccountйofйtheйhigherйriskйofйelectricйshock.
2.4 Operational safety
Riskйofйinjury.
‣Operateйtheйdeviceйinйproperйtechnicalйconditionйandйfail-safeйconditionйonly.
‣Theйoperatorйisйresponsibleйforйinterference-freeйoperationйofйtheйdevice.
Conversions to the device
Unauthorizedйmodificationsйtoйtheйdeviceйareйnotйpermittedйandйcanйleadйtoйunforeseeable
dangers.
‣If,йdespiteйthis,йmodificationsйareйrequired,йconsultйwithйEndress+Hauser.
Repair
Toйensureйcontinuedйoperationalйsafetyйandйreliability,
‣Carryйoutйrepairsйonйtheйdeviceйonlyйifйtheyйareйexpresslyйpermitted.
‣Observeйfederal/nationalйregulationsйpertainingйtoйrepairйofйanйelectricalйdevice.
‣UseйoriginalйspareйpartsйandйaccessoriesйfromйEndress+Hauserйonly.
Environmental requirements
Ifйaйplasticйtransmitterйhousingйisйpermanentlyйexposedйtoйcertainйsteamйandйairйmixtures,
thisйcanйdamageйtheйhousing.
‣Ifйyouйareйunsure,йpleaseйcontactйyourйEndress+HauserйSalesйCenterйforйclarification.
‣Ifйusedйinйanйapproval-relatedйarea,йobserveйtheйinformationйonйtheйnameplate.
2.5 Product safety
Thisйmeasuringйdeviceйisйdesignedйinйaccordanceйwithйgoodйengineeringйpracticeйtoйmeet
state-of-the-artйsafetyйrequirements,йhasйbeenйtested,йandйleftйtheйfactoryйinйaйconditionйin
whichйitйisйsafeйtoйoperate.
Itйmeetsйgeneralйsafetyйstandardsйandйlegalйrequirements.йItйalsoйcompliesйwithйtheйEC
directivesйlistedйinйtheйdevice-specificйECйDeclarationйofйConformity.йEndress+Hauser
confirmsйthisйbyйaffixingйtheйCEйmarkйtoйtheйdevice.

ProlineйPromagйDй400йHART Basicйsafetyйinstructions
Endress+Hauser 11
2.6 IT security
Weйonlyйprovideйaйwarrantyйifйtheйdeviceйisйinstalledйandйusedйasйdescribedйinйthe
OperatingйInstructions.йTheйdeviceйisйequippedйwithйsecurityйmechanismsйtoйprotectйit
againstйanyйinadvertentйchangesйtoйtheйdeviceйsettings.
ITйsecurityйmeasuresйinйlineйwithйoperatorsрйsecurityйstandardsйandйdesignedйtoйprovide
additionalйprotectionйforйtheйdeviceйandйdeviceйdataйtransferйmustйbeйimplementedйbyйthe
operatorsйthemselves.

Productйdescription ProlineйPromagйDй400йHART
12 Endress+Hauser
3 Product description
3.1 Product design
1
2
3
5
6
8
7
4
ййA0021563
 1 Important components of the compact version
1 Display module
2 Smart sensor electronics module
3 HistoROM DAT (plug-in memory)
4 Main electronics module
5 Terminals (screw terminals, some available as plug-in terminals)
6 Transmitter housing, compact version
7 Cable glands
8 Sensor, compact version

ProlineйPromagйDй400йHART Incomingйacceptanceйandйproductйidentification
Endress+Hauser 13
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
1
+
2
1
+
2
Areйtheйorderйcodesйonйthe
deliveryйnoteйс1)йandйthe
productйstickerйс2)
identical?
Areйtheйgoodsйundamaged?
Doйtheйnameplateйdata
matchйtheйordering
informationйonйtheйdelivery
note?
IsйtheйCD-ROMйwithйthe
TechnicalйDocumentation
сdependsйonйdevice
version)йandйdocuments
present?
• Ifйoneйofйtheйconditionsйisйnotйsatisfied,йcontactйyourйEndress+HauserйSalesйCenter.
• Dependingйonйtheйdeviceйversion,йtheйCD-ROMйmightйnotйbeйpartйofйtheйdeliveryкйIn
suchйcases,йtheйtechnicalйdocumentationйisйavailableйviaйtheйInternetйorйviaйthe
Endress+Hauser Operations App,йseeйtheй"Productйidentification"йsection
сййй14).
4.2 Product identification
Theйfollowingйoptionsйareйavailableйforйidentificationйofйtheйmeasuringйdevice:
• Nameplateйspecifications
• Orderйcodeйwithйbreakdownйofйtheйdeviceйfeaturesйonйtheйdeliveryйnote
• EnterйserialйnumbersйfromйnameplatesйinйW@M Device Viewer
сwww.endress.com/deviceviewer):йAllйinformationйaboutйtheйmeasuringйdeviceйis
displayed.
• EnterйtheйserialйnumberйfromйtheйnameplatesйintoйtheйEndress+Hauser Operations App
orйscanйtheй2-DйmatrixйcodeйсQRйcode)йonйtheйnameplateйwithйtheйEndress+Hauser
Operations App:йallйtheйinformationйforйtheйmeasuringйdeviceйisйdisplayed.

Incomingйacceptanceйandйproductйidentification ProlineйPromagйDй400йHART
14 Endress+Hauser
ForйanйoverviewйofйtheйscopeйofйtheйassociatedйTechnicalйDocumentation,йreferйtoйthe
following:
• Theйchaptersй"Additionalйstandardйdocumentationйonйtheйdevice"йсййй8)йand
"Supplementaryйdevice-dependentйdocumentation"йсййй8)
• TheйW@M Device Viewer:йEnterйtheйserialйnumberйfromйtheйnameplate
сwww.endress.com/deviceviewer)
• TheйEndress+Hauser Operations App:йEnterйtheйserialйnumberйfromйtheйnameplateйor
scanйtheй2-DйmatrixйcodeйсQRйcode)йonйtheйnameplate.
4.2.1 Transmitter nameplate
Order code:
i
Ext. ord. cd.:
Ser. no.:
Patents
i
Date:
1
2
3 4 5 6 7
8
9
10
111213
ййA0017346
 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number
5 Extended order code
6 Permitted ambient temperature range (Ta)
7 Firmware version (FW) and device revision (Dev.Rev.) from the factory
8 Degree of protection
9 Permitted temperature range for cable
10 2-D matrix code
11 Manufacturing date: year-month
12 CE mark, C-Tick
13 Electrical connection data, e.g. available inputs and outputs, supply voltage

ProlineйPromagйDй400йHART Incomingйacceptanceйandйproductйidentification
Endress+Hauser 15
4.2.2 Sensor nameplate
Ser.No.:
Order Code:
XXXXX-XXXX/XXXX
Promag D
XXXXXXXXXXXXXX
IP66/ 67, Type 4X encl.
Ext. ord. cd.: XXXXX-XXXXXXXXXXXXX +
DN25 / 1" DIN/EN PN16
Tm:
+5 °C...+60 °C
PA/1.4435/316L/EPDM/1.4301/304
Made in Switzerland
Ta: -20 °C...+60 °C
1
3
4
5
2
67
8
12
Tm:
9
10
11
ййA0017224
 3 Example of sensor nameplate
1 Name of the sensor
2 Manufacturing location
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Nominal diameter of sensor
7 Nominal pressure
8 Medium temperature range
9 Material of lining and electrodes
10 Permitted ambient temperature range
11 Degree of protection
12 2-D matrix code
Order code
Theйmeasuringйdeviceйisйreorderedйusingйtheйorderйcode.
Extended order code
• Theйdeviceйtypeйсproductйroot)йandйbasicйspecificationsйсmandatoryйfeatures)йare
alwaysйlisted.
• Ofйtheйoptionalйspecificationsйсoptionalйfeatures),йonlyйtheйsafetyйandйapproval-
relatedйspecificationsйareйlistedйсe.g.йLA).йIfйotherйoptionalйspecificationsйareйalso
ordered,йtheseйareйindicatedйcollectivelyйusingйtheй#йplaceholderйsymbolйсe.g.й#LA#).
• Ifйtheйorderedйoptionalйspecificationsйdoйnotйincludeйanyйsafetyйandйapproval-related
specifications,йtheyйareйindicatedйbyйtheй+йplaceholderйsymbolйсe.g.йXXXXXX-ABCDE
+).
4.2.3 Symbols on measuring device
Symbol Meaning

WARNING!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйinйserious
orйfatalйinjury.
ййA0011194
Reference to documentation
Refersйtoйtheйcorrespondingйdeviceйdocumentation.
ййA0011199
Protective ground connection
Aйterminalйwhichйmustйbeйconnectedйtoйgroundйpriorйtoйestablishingйanyйotherйconnections.

Storageйandйtransport ProlineйPromagйDй400йHART
16 Endress+Hauser
5 Storage and transport
5.1 Storage conditions
Observeйtheйfollowingйnotesйforйstorage:
• Storeйinйtheйoriginalйpackagingйtoйensureйprotectionйfromйshock.
• Doйnotйremoveйprotectiveйcoversйorйprotectiveйcapsйinstalledйonйprocessйconnections.
Theyйpreventйmechanicalйdamageйtoйtheйsealingйsurfacesйandйcontaminationйinйthe
measuringйtube.
• Protectйfromйdirectйsunlightйtoйavoidйunacceptablyйhighйsurfaceйtemperatures.
• Selectйaйstorageйlocationйwhereйmoistureйcannotйcollectйinйtheйmeasuringйdeviceйas
fungusйandйbacteriaйinfestationйcanйdamageйtheйlining.
• Storeйinйaйdryйandйdust-freeйplace.
• Doйnotйstoreйoutdoors.
• Storageйtemperatureсййй133)
5.2 Transporting the product
฀WARNING
Center of gravity of the measuring device is higher than the suspension points of the
webbing slings.
Riskйofйinjuryйifйtheйmeasuringйdeviceйslips.
‣Secureйtheйmeasuringйdeviceйfromйrotatingйorйslipping.
‣Observeйtheйweightйspecifiedйonйtheйpackagingйсstick-onйlabel).
‣Observeйtheйtransportйinstructionsйonйtheйstick-onйlabelйonйtheйelectronicsйcompartment
cover.
ййA0015606
• Transportйtheйmeasuringйdeviceйtoйtheйmeasuringйpointйinйtheйoriginalйpackaging.
• Liftingйgear
– Webbingйslings:йDoйnotйuseйchains,йasйtheyйcouldйdamageйtheйhousing.
– Forйwoodйcrates,йtheйfloorйstructureйenablesйtheseйtoйbeйloadedйlengthwiseйor
broadsideйusingйaйforklift.
• Useйtheйwebbingйslingsйtoйliftйtheйmeasuringйdeviceйatйtheйprocessйconnections;йdo
notйliftйbyйtheйtransmitterйhousingйorйbyйtheйconnectionйhousingйofйtheйremote
version.
• Doйnotйremoveйprotectiveйcoversйorйprotectiveйcapsйinstalledйonйprocessйconnections.
Theyйpreventйmechanicalйdamageйtoйtheйsealingйsurfacesйandйcontaminationйinйthe
measuringйtube.

ProlineйPromagйDй400йHART Mounting
Endress+Hauser 17
5.3 Packaging disposal
Allйpackagingйmaterialsйareйenvironmentallyйfriendlyйandй100%йrecyclable:
• Measuringйdeviceйsecondaryйpackaging:йpolymerйstretchйfilmйthatйconformsйtoйEC
Directiveй2002/95/ECйсRoHS).
• Packaging:
– Woodйcrate,йtreatedйinйaccordanceйwithйISPMй15йstandard,йwhichйisйconfirmedйbyйthe
affixedйIPPCйlogo.
or
– CartonйinйaccordanceйwithйEuropeanйPackagingйDirectiveй94/62EC;йrecyclabilityйis
confirmedйbyйtheйaffixedйRESYйsymbol.
• Seaworthyйpackagingйсoptional):йWoodйcrate,йtreatedйinйaccordanceйwithйISPMй15
standard,йwhichйisйconfirmedйbyйtheйaffixedйIPPCйlogo.
• Carryingйandйmountingйhardware:
– Disposableйplasticйpallet
– Plasticйstraps
– Plasticйadhesiveйstrips
• Dunnage:йPaperйcushion
6 Mounting
6.1 Installation conditions
6.1.1 Mounting position
Mounting location
h
ййA0023343
Preferablyйinstallйtheйsensorйinйanйascendingйpipe,йandйensureйaйsufficientйdistanceйtoйthe
nextйpipeйelbow:йhй≥йй2й×йDN
Toйpreventйmeasuringйerrorsйarisingйfromйaccumulationйofйgasйbubblesйinйtheйmeasuring
tube,йavoidйtheйfollowingйmountingйlocationsйinйtheйpipe:
• Highestйpointйofйaйpipeline.
• Directlyйupstreamйofйaйfreeйpipeйoutletйinйaйdownйpipe.
Installation in down pipes
Installйaйsiphonйwithйaйventйvalveйdownstreamйofйtheйsensorйinйdownйpipesйwhoseйlengthйh
≥ййй5йmйс16.4йft).йThisйprecautionйisйtoйavoidйlowйpressureйandйtheйconsequentйriskйof
damageйtoйtheйmeasuringйtube.йThisйmeasureйalsoйpreventsйtheйsystemйlosingйprime.
Forйinformationйonйtheйlinerрsйresistanceйtoйpartialйvacuumйсййй133)

Mounting ProlineйPromagйDй400йHART
18 Endress+Hauser
h
2
1
ййA0017064
 4 Installation in a down pipe
1 Vent valve
2 Pipe siphon
h Length of down pipe
Installation in partially filled pipes
Aйpartiallyйfilledйpipeйwithйaйgradientйnecessitatesйaйdrain-typeйconfiguration.йTheйempty
pipeйdetectionйсEPD)йfunctionйoffersйadditionalйprotectionйbyйdetectingйemptyйorйpartially
filledйpipes.
³5 × DN ³2 × DN
ййA0017063
Orientation
Theйdirectionйofйtheйarrowйonйtheйsensorйnameplateйhelpsйyouйtoйinstallйtheйsensor
accordingйtoйtheйflowйdirectionйсdirectionйofйmediumйflowйthroughйtheйpiping).
Anйoptimumйorientationйpositionйhelpsйavoidйgasйandйairйaccumulationsйandйdepositsйin
theйmeasuringйtube.
Vertical
ййA0015591
Thisйisйtheйoptimumйforйself-emptyingйpipingйsystems.

ProlineйPromagйDй400йHART Mounting
Endress+Hauser 19
Horizontal
A
1 1
A
ййA0017195
1 Measuring electrodes for signal detection
Theйmeasuringйelectrodeйplaneйmustйbeйhorizontal.йThisйpreventsйbriefйinsulationйof
theйtwoйmeasuringйelectrodesйbyйentrainedйairйbubbles.
Inlet and outlet runs
Ifйpossible,йinstallйtheйsensorйupstreamйfromйfittingsйsuchйasйvalves,йT-piecesйorйelbows.
Observeйtheйfollowingйinletйandйoutletйrunsйtoйcomplyйwithйaccuracyйspecifications:
5 × DN≥2 × DN≥
ййA0016275
Installation dimensions
Forйtheйdimensionsйandйinstallationйlengthsйofйtheйdevice,йseeйtheй"Technical
Information"йdocument,й"Mechanicalйconstruction"йsection
6.1.2 Requirements from environment and process
Ambient temperature range
Transmitter –40йtoй+60й°Cйс–40йtoй+140й°F)
Localйdisplay –20йtoй+60й°Cйс–4йtoй+140й°F),йtheйreadabilityйofйtheйdisplayйmayйbe
impairedйatйtemperaturesйoutsideйtheйtemperatureйrange.
Sensor –20йtoй+60й°Cйс–4йtoй+140й°F)
Liner Doйnotйexceedйorйfallйbelowйtheйpermittedйtemperatureйrangeйofйtheйliner
сййй133).
Ifйoperatingйoutdoors:
• Installйtheйmeasuringйdeviceйinйaйshadyйlocation.
• Avoidйdirectйsunlight,йparticularlyйinйwarmйclimaticйregions.
• Avoidйdirectйexposureйtoйweatherйconditions.
• Protectйtheйdisplayйagainstйimpact.
• Protectйtheйdisplayйfromйabrasionйbyйsandйinйdesertйareas.

Mounting ProlineйPromagйDй400йHART
20 Endress+Hauser
AйdisplayйprotectorйcanйbeйorderedйfromйEndress+Hauser:й"Accessories"йsection
сййй124)
System pressure
ййA0015594
Neverйinstallйtheйsensorйonйtheйpumpйsuctionйsideйinйorderйtoйavoidйtheйriskйofйlowйpressure,
andйthusйdamageйtoйtheйliner.
Furthermore,йinstallйpulseйdampersйifйreciprocating,йdiaphragmйorйperistalticйpumps
areйused.
• Forйinformationйonйtheйlinerрsйresistanceйtoйpartialйvacuumйсййй133)
• Informationйonйtheйshockйresistanceйofйtheйmeasuringйsystemйсййй133)
• Informationйonйtheйvibrationйresistanceйofйtheйmeasuringйsystemйсййй133)
Vibrations
Inйtheйeventйofйveryйstrongйvibrations,йtheйpipeйandйsensorйmustйbeйsupportedйandйfixed.
Itйisйalsoйadvisableйtoйmountйtheйsensorйandйtransmitterйseparately.
Informationйonйtheйshockйresistanceйofйtheйmeasuringйsystemйсййй133)
Informationйonйtheйvibrationйresistanceйofйtheйmeasuringйsystemйсййй133)
L
ййA0016266
 5 Measures to avoid device vibrations (L > 10 m (33 ft))
Adapters
SuitableйadaptersйtoйDINйENй545йсdouble-flangeйreducers)йcanйbeйusedйtoйinstallйtheйsensor
inйlarger-diameterйpipes.йTheйresultantйincreaseйinйtheйrateйofйflowйimprovesйmeasuring
accuracyйwithйveryйslow-movingйfluids.йTheйnomogramйshownйhereйcanйbeйusedйto
calculateйtheйpressureйlossйcausedйbyйreducersйandйexpanders.
Theйnomogramйonlyйappliesйtoйliquidsйwithйaйviscosityйsimilarйtoйthatйofйwater.
1. Calculateйtheйratioйofйtheйdiametersйd/D.
2. Fromйtheйnomogramйreadйoffйtheйpressureйlossйasйaйfunctionйofйflowйvelocity
сdownstreamйfromйtheйreduction)йandйtheйd/Dйratio.