Eneo VMC-27LEDM User manual

QUICK MANUAL
Installation and Operating Instructions
TFT LCD MONITOR
VMC-27LEDM
VMC-32LEDM

KEY BUTTON
OSD Key Function
MENU Activate the menu function / Exit from the menu
SOURCE / ▼Input source menu / Source selection(move down from OSD menu)
AUTO / ▲Auto-fit screen with PC-RGB input / move up from OSD menu
◀(VOL) Decrease the level of volume and move the previous menu
(VOL)▶Increase the level of volume and select the OSD menu
Power On / Off
LED
Red : Power Off state
Green : Power On and available input signal state
Orange : When DPMS "ON" state, no input signal
▲+◀Press “▲ , ◀” Key 10 seconds simultaneously to lock /
unlock OSD Key
SHORT KEY FUNCTION

CONNECTION
<VMC-27LEDM>
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
①HDMI 1
HDMI signal 1 input
②HDMI 2
HDMI signal 2 input
③VGA
VGA (PC RGB) signal input
④AUDIO (PC)
Stereo audio input for VGA
⑤For FW Update
⑥DC12V
DC adapter input
⑦AUDIO(VIDEO-1)
Stereo audio input for VIDEO-1
⑧AUDIO(VIDEO-2)
Stereo audio input for VIDEO-2
⑨VIDEO-1 IN/OUT
VIDEO-1 signal input/looping out
⑩VIDEO-2 IN/OUT
VIDEO-2 signal input/looping out

CONNECTION
①HDMI 1
HDMI signal 1 input
②HDMI 2
HDMI signal 2 input
③VGA
VGA (PC RGB) signal input
④AUDIO (PC)
Stereo audio input for VGA
⑤For FW Update
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
⑥AUDIO(VIDEO-1)
Stereo audio input for VIDEO-1
⑦AUDIO(VIDEO-2)
Stereo audio input for VIDEO-2
⑧VIDEO-1 IN/OUT
VIDEO-1 signal input/looping out
⑨VIDEO-2 IN/OUT
VIDEO-2 signal input/looping out
⑩AC POWER
AC100~240V input
<VMC-32LEDM>

PICTURE MENU
Picture Mode Adjust sate of the picture
Color Temperature Change color according to the color temperature
Aspect Ratio Change the aspect ratio
Noise Reduction Adjust noise attenuation of input signal
Screen Adjust the PC-RGB input signal to fit the screen
Color Range Setting the Color Expression Range
The PICTURE Menu can be selected from the following 7 modes by pressing the ▲or ▼key.
OPTION MENU

PICTURE MENU
INPUT MENU
The Option Menu can be selected from the following 6 modes by pressing the ▲or ▼key.
OSD Language Selectable OSD Menu Language
Blending Adjust blending for OSD Menu and Main window
OSD Duration Setting Duration time of OSD Menu
Restore Factory Default
Software Update(USB)
Key Lock Locking the button(prevent operation)
DPMS When input signal is the no signal, DPMS "on" change
the power saving mode.
Input Source can be selected from the following four input modes by using the ▲and ▼
keys when the window as shown below is displayed by pressing the "SOURCE / ▼" key
in the Main window.
(Input Source can be selected by ▲and ▼key when window shown as below. To be in this menu,
pressing the “SOURCE” / ▼" key in the Main window.)
VOLUME MENU
Audio Volume can be increased or decreased by pressing "VOL- / ◀", "VOL + / ▶" Key.

eneo® is a registered trademark of Videor E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark, Germany
Tel. [phone] / 888-0 · Fax [phone] / 888-100
www.videor.com
www.eneo-security.com
Technical changes reserved.
© Copyright by Videor E. Hartig GmbH 01/2018