EnGenius ECB-1220R User manual

ECB-1220R Wireless AP-Router/Client Bridge-Router 1 Quick Installation Guide
ECB-1220R
Wireless Client Bridge/AP/Router/Bridge Router
Quick Installation Guide
Pre-requisites:-
1. Internet connection should be setup & ready to use (ADSL or cable modem).
2. Modem must provide RJ45 port to connect with ECB-1220R.
3. CAT 5 network cable(s), RJ45 port on PC/Notebook.
4. Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter.
DC IN LAN ports WAN RESET ANTENNA
STEP 1
Connect ECB-1220R INTERNET port & your modem WAN with network cable.
STEP 2
Power up ECB-1220R.POWER led on front panel lights up & remains stable.
STEP 3
Connect ECB-1220R RJ45 port & PC/Notebook RJ45 port with network cable.
STEP 4
Connect ECB-1220R RJ45 port & PC/Notebook RJ45 port with network cable.

ECB-1220R Wireless AP-Router/Client Bridge-Router 2 Quick Installation Guide
You will see the network connection enabled at your computer. Edit network adapter
properties and configure to [Static IP address]
1. OPEN your browser (e.g. Internet Explorer)
2. Type http://192.168.1.1 or http://192.168.1.2 in address bar and hit [Enter]
button on your keyboard.
3. Give username/password details as admin/admin.
4. Click OK to navigate into ECB-1220R configuration home page.
5. Enable Wireless AP settings & apply settings.
6. Click Management to set the mode of the ECB-1220R.