EnGenius ETR9360 User manual

ETR9360 3G Battery Router
Quick Start Guide
CHECK
•A standard CD-ROM drive
•Internet connection should be setup & ready to use. (Without
3G modem)
•3G USB modem to connect with ETR9360.
•Microsoft Windows compatible PC/Notebook with UPnP enabled
network adapter
•CAT 5 network cable(s), RJ45 port on PC/Notebook.
•Internet Browser (Microsoft Internet Explorer, Firefox and
Netscape navigator.)
STEP 1
Connect the power adapter supplied with the ETR9650 to the
power socket on the back of this device. Check to see that the power
LED on the front of the panel of the ETR9360 is turned ON.
STEP 2
Connect ETR9360 LAN port & PC/Notebook RJ45 port with
network cable.
STEP 3
Run the web browser on your computer. In the address field, type the
default IP address http://192.168.0.1.
The following login screen will appear. Enter admin for both
Username and Password.
Quick Start Guide – ETR9350 Wireless Broadband Router. 1

Step 4
Select ‘Internet’ and Select ‘3G’ on WAN Access Type.
Use the following setting for local ISP.
ISP Singtel M1 Starhub
APN Code Internet Sunsurf Shwap
Dial Number *99# *99# *99#
Step 5
Click ‘Wireless’ and select ‘Basic Settings’ to change SSID to desired
identity and Click ‘Apply Changes’ to take effect.
Quick Start Guide – ETR9350 Wireless Broadband Router. 2

Step 6
Setup WiFi Security
Click on ‘Wireless’ and Click on ‘Security’ to define WiFi encryption.
Next Click on ‘Apply Changes’ to take effect.
Note
Once setup is completed, power off modem and router. Power up
the modem and router at the same time and wait for both the
modem and router to completely initialize.
Refer to the User’s manual for more detailed explanation of
each operating mode.
Battery must be in at all times
Quick Start Guide – ETR9350 Wireless Broadband Router. 3