EnGenius ECB600 User manual

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Package Contents
- 1* ECB600
- 1*Power Adapter
- 1*QIG
- 1*CD (User’s Manual)
- 1*Ethernet Cable
- 1*Wall Mount kit
- 4*Detachable Antenna
ECB600 is a wireless-11n 600Mbps (300Mbps + 300Mbps)
High Power Dual Band concurrent Access Point/ Client Bridge.
It allows simultaneous operation of 2.4GHz and 5GHz wireless
network. With media-optimized performance, you can enjoy
internet surfing more smoothly and with less lag.
Maxima 29dBm high power transmission provides extended
coverage in your environment. MSSID + VLAN make your
data more secure and easy management. Standard PoE
interoperable with 802.3af/at makes internet connection
more flexible.
ECB600 designed with 4 detachable high gain antennas which
deliver larger coverage and higher throughput in the
environment. Elegant body and white outlook will upgrade
aesthetic feeling on your desk in working environment.
ECB600 is the best choice in business office.
Software Features
System Requirement
System
Windows Windows7, 98, ME, NT, XP, 2000. Mac OS X (10.4)
Access method
Web Based (HTTP 1.0 / 1.1)
Browser Compatibility
Microsoft IE 6.0 or above, Firefox 2.0 or above
Status
System Status
System Information
System Up Time, Device Name, Wireless MAC, LAN
MAC, Country, Current Time, Firmware Version
Current IP Setting
IP Address, Subnet Mask, Default Gateway, DHCP,
DNS.
Current Wireless Setting
Operation mode, Wireless Mode, Channel/
Frequency, L2 Isolation, MSSID Setting
Client List
List current associated clients. Show only authorized and associated clients
System Log
Displays a list of events triggered

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Wireless Functional List
Operation mode
AP
CB
WDS
Repeater
WDS detail
WDS AP
WDS bridge
WDS station
802.11 mode options
a/b/g/n
Band Steering
Band steering steers 5GHz-compatible clients to 5GHz band and leave
2.4 GHz band for single band (2.4GHz) client using.
Channel setting
Manual
Auto / Best Channel Selection
Transfer rate setting
Auto and Manual
Output Power Control
Select by dBm
Multiple BSSID (Multi AP)
8 BSSID for 2.4Ghz , another 8BSSID for 5Ghz
Each BSSID should has its own WiFi & security settings
WPS
Software only
Security
WEP
WEP(64/128bit)
WPA/ WPA2-PSK
TKIP / AES
WPA/WPA2
Enterprise
Supported
MAC address
filtering
MAC address filtering (WLAN, up to 50 field)
Support EAP
EAP-TLS
EAP-TTLS/MSCHAPv2
PEAPv0/EAP-MSCHAPv2
PEAPv1/EAP-GTC
EAP-SIM
EAP-AKA
802.1x
Authenticator
MD5/ TLS/ TTLS, PEAP
Hidden ESSID
Supported
MAC address
MAC address filtering (WLAN, up to 50 field)

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
L2 Isolation
Supported
LAN Settings
IP (check validity)
VLAN
MSSID
VLAN tag on MSSID
Management VLAN
Ethernet Port VID
Only allow user with specified VID to access the device
Tag/ Untag Option
Independent VLAN setting can be enable or disable
Add VLAN tag
Any packet that enters the Device without a VLAN tag will have a VLAN
tag inserted with a PVID (Ethernet Port VID)
VLAN Pass through
VLAN pass through over WDS bridge
SNMP
SNMP V1/V2C
- SNMPActive : Disabled / Enabled
- SNMP Version : V1/V2c/ALL
- Read Community
- Set Community
- System Location
- System Contract
- TrapActive : Disabled / Enabled
- Trap Manager IP
MIBI, MIBII
Private MIB
SNMPv3
QoS
WMM (Default)
Load Balance Per SSID
Administration
User Name (set as “admin”, can be changed by user)
Password (c set as “admin”, can be changed by user)
Backup/ Restore Setting
Save Current Setting
Restore Saved Setting
Reset to Factory Default
Firmware Upgrade
supported
UPnP
Supported
Firmware Upgrade
supported
Advanced Management
Auto Reboot
CLI
NMS (EZ Controller) supported
Hardware Specifications
MCU
AR9344+AR9382
Memory/ Flash
64MB / 16MB

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Dimension
189mm x 140mm x 26mm
Physical Interface
LAN: 1 x 10/100/1000 Gigabit Ethernet (802.3at PoE standard supported)
Reset
Power Jack
Power on/off switch
LED Definition
Power x1
Orange
Booting: Blink at 1HBooting
System Ready: On
Firmware Upgrade: Blink at 4Hz
System Off: Power Off
LAN x1
Blue
Link: Solid Light / Active: Blinking
(Receiving/ Transmitting data)
WLAN x2
2.4G Blue
5G Blue
Link: Solid Light / Active: Blinking
(Receiving/ Transmitting data)
Adapter
12V / 2A
Wireless Specifications
Frequency Band
Radio I: 11b/g/n : 2.412～2.484 GHz
Radio II: 11a/n :5.18 ~ 5.24 & 5.26 ~ 5.32 & 5.5 ~ 5.7 & 5.745 ~ 5.825 GHz
Modulation
Technology
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operating Channels
2.4G (11 for North America, 14 for Japan, 13 for Europe)
5G (TBD)depend on what region
Wireless Setting
Operation Mode –AP / CB/ WDS / Repeater
Wireless Mode –11a/ 11b/ 11g /11n
Channel Selection (Setting varies by Country)
Channel Bandwidth (Auto, 20Mhz, 40Mhz)
Transmission Rate –
2.4GHz: 11n only ,11b/g/n mix ,11b only ,11b/g, 11g only
5GHz: 11n only mode, 11a/n mix mode, 11a only mode

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Receive Sensitivity
(Typical)
802.11b
-99dBm @ 1Mbps
-93dBm @ 11Mbps
802.11g
-96dBm @ 6Mbps
-82dBm @ 54Mbps
802.11n (2.4GHz)
-97dBm @ MCS0
-78dBm @ MCS7
-96dBm @ MCS8
-76dBm @ MCS15
802.11a
-90dBm @ 6Mbps
-72dBm @ 54Mbps
802.11n (5GHz)
-89dBm @ MCS0
-70dBm @ MCS7
-89dBm @ MCS8
-70dBm @ MCS15
Available transmit
power (2 stream)
(The Max. Power may
be different depending
on local regulations)
11b
1Mbps - 11Mbps
29
11g
6Mbps - 9Mbps
29
12Mbps - 18Mbps
28
24Mbps - 36Mbps
24
48Mbps - 54Mbps
23
11n
MCS 0-1 / 8-9
29
MCS 2-3 / 10-11
28
MCS 4-5 / 12-13
24
MCS 6-7 / 14-15
23
11a
6Mbps - 9Mbps
26
12Mbps - 18Mbps
25
24Mbps - 36Mbps
24
48Mbps - 54Mbps
23
11n
MCS 0-1 / 8-9
26
MCS 2-3 / 10-11
25
MCS 4-5 / 12-13
24
MCS 6-7 / 14-15
23
Antenna
External Omni Detachable Antenna (2.4GHz *2/ 5GHz *2)
Environment & Mechanical
Temperature Range
0 to 50° C - Operating, -20 to 60 ° C - Storage
Humidity
(non-condensing)
90% or less –Operating, 90% or less - Storage

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Certification
FCC
Certified
CE
Certified
IC
Certified