EnGenius ECM355AP User manual

User Manual
Business Solutions
ECM355AP 802.11 abgn/ac Indoor AP
ECM855AP Wireless 802.11 abgn/ac Outdoor AP
ECM955AP AC1300 Wave2 Dual Band Outdoor Cloud Management Base Station
ECM955AP
version 1.1
ECM355AP ECM855AP

2
IMPORTANT
To install this Access Point please refer to the
Quick Installation Guide included in the product packaging.

3
Chapter 1 Product Overview...................................................................... 4
Introduction...................................................................................................5
ECM355AP
Key Features.................................................................................... 5
Package Contents......................................................................... 5
Physical Interface......................................................................... 6
ECM855AP
Key Features.................................................................................... 7
Package Contents......................................................................... 7
Physical Interface......................................................................... 8
ECM955AP
Key Features.................................................................................... 9
Package Contents......................................................................... 9
Physical Interface......................................................................... 10
Technical Specications.........................................................................11
Chapter 2 Conguring Your Access Point............................................13
Default Settings./Web Conguration.......................................... 14
Appendix..............................................................................................................15
FCC Interference Statement...........................................................16
Professional installation instruction...........................................19
Table of Contents

4
Chapter 1
Product Overview

5
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
ECM355AP
Key Features
• Up to 26 dBm transmit power enabling long range connectivity
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz
band
• Can be monitored after deployment with ezmCloud for Windows
• Can be power up with Proprietary 54V PoE.
• Fast Transition and Handover between Access Points
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
• Secured Guest Network option available
Introduction
Package Contents
The ECM355AP package contains the following items:*
• ECM355AP Access Point
• Ceiling Mount Bracket
• Mounting Screw Set
• Quick Installation Guide
*(all items must be in package to issue a refund):

6
Physical interface
1 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
2 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
3 DC in
4 Reset button
Dimensions and Weights
Length: 200mm
Width: 200mm
Depth: 45mm”
Weight: TBD
2
13 4

7
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
ECM855AP
Key Features
• Up to 23 dBm transmit power enabling long range connectivity
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz band
• Two detachable 4.5 dBi 2.4 GHz Omni-directional antennas
• Two detachable 6.3 dBi 5 GHz Omni-directional antennas
• Can be monitored after deployment with ezmCloud for Windows.
• Can be used with included power adapter or via PoE with
Proprietary 54V.
• Fast Transition and Handover between Access Points
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
• Secured Guest Network option available
Package Contents
The ECM855AP package contains the following items:*
• ECM855AP Access Point
• 2 detachable 4.5 dBi 2.4 GHz Omni-directional Antenna
• 2 detachable 6.3 dBi 5 GHz Omni-directional Antenna
• Wall Mount Screw set
• Ground cable and Screw for ground use
• Wall Mounting plate, Mounting Bracket, Screw set kit
• Quick Installation Guide
*(all items must be in package to issue a refund)
I

8
Physical interface
12.4 GHz Antennas: Detachable 4.5 dBi 2.4 GHz Omni-directional
2 5 GHz Antennas Detachable 6.3 dBi 5 GHz Omni-directional
3 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
4 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
5 Mounting Holes: Using the provided hardware, the ECM855AP
can be attached to a wall or pole.
*The installation angle of antenna must be vertical to the ground.
Dimensions and Weights
Length: 218.7mm
Width: 124.0mm
Depth: 56.2mm”
Weight: 2.04kg
1
1 2
2
4
5
3

9
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
ECM955AP
Key Features
• Up to 29dBm transmit power enabling long range connectivity
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz band
• Two detachable 5 dBi 2.4 GHz Omni-directional antennas
• Two detachable 7 dBi 5 GHz Omni-directional antennas
• Can be monitored after deployment with EnGenius ezmCloud
• Can be used with included power adapter or via PoE with
Proprietary 54V.
• Fast Transition and Handover between Access Points
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
• Secured Guest Network option available
Package Contents
The ECM955AP package contains the following items:*
• ECM955AP Access Point
• 2 detachable 5 dBi 2.4 GHz Omni-directional Antenna
• 2 detachable 7 dBi 5 GHz Omni-directional Antenna
• 1 LTE Antenna
• 1 GPS Antenna
• Ground cable
• Wall Mounting plate, Mounting Bracket, Screw set kit
• Quick Installation Guide
*(all items must be in package to issue a refund)

10
Physical interface
12.4 GHz Antennas: Detachable 5 dBi 2.4 GHz Omni-directional,
2 5 GHz Antennas Detachable 7 dBi 5 GHz Omni-directional
3 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
4 LAN Port 2 (802.3af PSE Output): Ethernet port for RJ-45 cable.
5 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
6 Locate GPS
7 Scanning Radio
*The installation angle of antenna must be vertical to the ground.
Dimensions and Weights
Length: 285mm
Width: 218mm
Depth: 55.5mm”
Weight: TBD
1
2
1
2
34
5
6 7

11
Control
CLI Supported
Distance Control (Ack Timeout)
802.1X Supplicant (CB Mode)
Multicast Supported
Auto Reboot
Obey Regulatory Power
Security
WPA2 Personal
WPA2 Enterprise
Hides SSID in beacons
MAC address ltering, up to 32 MACs
Wireless STA (Client) connection list
Https Support
SSH Support
QoS (Quality of Service)
Complaint with IEEE 802.11e standard
Physical/Environment Conditions
Operating:
ECM355AP
Temperature: 32 °F to 122 °F (0 °C to 50 °C)
Humidity (non-condensing): 0%~90% typical
ECM855AP
Temperature: -4 °F to 158 °F (-20 °C to 70 °C)
Humidity (non-condensing): 0%~90% typical
ECM955AP
Temperature: -4 °F to 158 °F (-20 °C to 70 °C)
Humidity (non-condensing): 0%~90% typical
Standard:
IEEE802.11ac/a/n on 5 GHz
IEEE802.11b/g/n on 2.4 GHz
IEEE802.3at
LED Indicator
Power
LAN
2.4 GHz
5 GHz
Operation Modes
Access Point
Client Bridge
WDS AP
WDS Bridge
WDS Station
Management
Auto Channel Selection
Multiple SSID: 8 SSIDs per Radio
BSSID
SNMP V1/V2c/V3
MIB I/II, Private MIB
VLAN Tag/VLAN Pass-through
Clients Statistics
Save Conguration as User Default
Fast Roaming
E-Mail Alert
RADIUS Accounting
Guest Network
Technical Specications

12
Storage:
ECM355AP
Temperature: -40 °F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
ECM855AP
Temperature: -40°F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
ECM955AP
Temperature: -40°F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
System Requirements
The following are the Minimum System Requirements in order to
congure the device.
• Computer with an Ethernet interface or wireless network capability
• Windows OS(XP, Vista, 7, 8, 10), Mac OS, or Linux-based operating
systems
• Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or
another similar browser application)

13
Chapter 2
Conguring Your
Access Point

14
This section will show you the conguration function and status
overview on the web-based interface. For more detail settings please
use the cloud platform.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
IP Address 192.168.1.1
Username / Password admin / admin
Web Conguration
1.Open a web browser (Internet Explorer/Firefox/Safari/Chrome)
and enter the IP Address http://192.168.1.1
Note: If you have changed the default LAN IP Address of the
Access Point, ensure you enter the correct IP Address.
2.The default username and password are admin. Once you have
entered the correct username and password, click the Login
button to open the web-base conguration page.
3.If successful, you will be logged in and see the interface of this
Access Point.
*The model name will be varied by different models.
Device Status: You can see the device overview and network
connectivity status.
Local Setting: You can set the IPv4,IPv6, Spanning Tree Protocal(STP)
,rmware upgrade and Miscellaneous in this page. For other
conguration you can implement in cloud platform.
Conguring Your Access Point

15
Appendix

16
Federal Communication Commission Interference Statement-ECM355AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one of the following measures:
 • Reorientorrelocatethereceivingantenna.
 • Increasetheseparationbetweentheequipmentandreceiver.
 • Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
 • Consultthedealeroranexperiencedradio/TVtechnicianforhelp
FCC Caution:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operations in the 5.15-5.25GHz band are restricted to indoor.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
indoor use only.
Appendix A

17
Federal Communication Commission Interference Statement-ECM855AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one of the following measures:
 • Reorientorrelocatethereceivingantenna.
 • Increasetheseparationbetweentheequipmentandreceiver.
 • Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
 • Consultthedealeroranexperiencedradio/TVtechnicianforhelp
FCC Caution:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 21 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
outdoor use only.
Appendix A

18
Federal Communication Commission Interference Statement-ECM955AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one of the following measures:
 • Reorientorrelocatethereceivingantenna.
 • Increasetheseparationbetweentheequipmentandreceiver.
 • Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
 • Consultthedealeroranexperiencedradio/TVtechnicianforhelp
FCC Caution:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
outdoor use only.
Appendix A

19
Appendix B -Professional installation instruction-ECM855AP
1. Installation personal
This product is designed for specic application and needs to be installed by a qualied personal who has RF and related rule knowl-
edge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 21cm from nearby person in normal operation con-
dition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or
excessiveRFtransmittingpowerwhichmayleadtotheviolationofFCC/IClimitandisprohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the nal output power does not exceed the limit set force in relevant
rules. The violation of the rule could lead to serious federal penalty.

20
Appendix B -Professional installation instruction-ECM955AP
1. Installation personal
This product is designed for specic application and needs to be installed by a qualied personal who has RF and related rule knowl-
edge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation con-
dition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or
excessiveRFtransmittingpowerwhichmayleadtotheviolationofFCC/IClimitandisprohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the nal output power does not exceed the limit set force in relevant
rules. The violation of the rule could lead to serious federal penalty.