EnGenius ENH700EXT User manual

WIRELESS OUTDOOR
DUAL RADIO 802.11a/b/g/n ACCESS POINT
Model: ENH700EXT
User Manual
Version 1.1

1
Table of Contents
About This Document .......................................................................................................................... 5
About EnGenius ................................................................................................................................... 5
Product Manual Formatting ................................................................................................................. 5
Before You Start .................................................................................................................................. 5
1Product Overview......................................................................................................................... 6
1.1 Contents ...................................................................................................................................... 6
1.2 Features and Benefits ................................................................................................................. 7
1.3 A Cost-Effective Wireless Solution to Extend and Expand an Existing Network ...................... 9
1.4 Hardware Overview .................................................................................................................. 10
1.5 System Requirements for Installation...................................................................................... 10
2Installation and Setup ................................................................................................................ 10
2.1 Installation Considerations....................................................................................................... 11
2.2 Assembling the ENH700EXT ..................................................................................................... 11
2.3 Configuring a TCP/IP connection on Windows® 7/Vista ......................................................... 13
Configuring Microsoft® Windows Vista .................................................................................................. 14
2.4 Configuring a TCP/IP connection on Windows® XP................................................................. 17
2.4.1 Configuring Apple® Mac OS X ....................................................................................................... 18
2.5 Logging onto the ENH700EXT ................................................................................................... 19
3Wireless Network Modes ........................................................................................................... 19
3.1 Access Point Mode (AP mode) ................................................................................................. 19
3.2 Client Bridge Mode ................................................................................................................... 20
3.3 WDS Mode ................................................................................................................................ 21
4User Interface............................................................................................................................. 23
5Status......................................................................................................................................... 24
5.1 Save/Reload .............................................................................................................................. 24
5.2 Main (System Information) ...................................................................................................... 24
5.3 2.4GHz Wireless Client List ....................................................................................................... 25

2
5.4 5GHz Wireless Client List .......................................................................................................... 25
5.5 System Log ................................................................................................................................ 25
6System ....................................................................................................................................... 26
6.1 Operation Mode ....................................................................................................................... 26
6.2 IP Settings.................................................................................................................................. 27
6.3 Spanning Tree Settings ............................................................................................................. 27
72.4GHz Wireless and 5GHz Wireless............................................................................................ 28
7.1 Access Point Mode.................................................................................................................... 29
7.1.1 Wireless Network ................................................................................................................. 30
7.1.2 SSID Profile............................................................................................................................ 31
7.1.3 Wireless MAC Filter .............................................................................................................. 31
7.1.4 Wireless Advanced Settings ................................................................................................. 33
7.2 Client Bridge.............................................................................................................................. 34
7.2.1 Wireless Network ................................................................................................................. 34
7.2.2 Wireless Advanced Settings ................................................................................................. 35
7.3 WDS Mode ................................................................................................................................ 37
7.3.1 WDS Station .......................................................................................................................... 37
7.3.2 WDS Link Settings ................................................................................................................. 37
8Wireless Security Settings........................................................................................................... 39
8.1 WPA-PSK, WPA2-PSK, or WPA-PSK Mixed............................................................................... 39
8.2 WPA, WPA2, or WPA Mixed ..................................................................................................... 40

3
............................... 41
Example diagram of ENH700EXT supports 802.1x with RADIUS server (sample encryption: WPA2
AES) ......................................................................................................................................................... 41
8.3 WEP ........................................................................................................................................... 41
9Management.............................................................................................................................. 43
9.1 Administration .......................................................................................................................... 43
9.2 Management VLAN................................................................................................................... 44
9.3 Wireless Traffic Shaping ........................................................................................................... 45
9.4 SNMP Settings........................................................................................................................... 45
9.5 Backup / Restore Settings......................................................................................................... 46
9.6 Auto Reboot Settings................................................................................................................ 46
9.7 Firmware Upgrade .................................................................................................................... 47
9.8 Time Settings............................................................................................................................. 48
9.9 Log ............................................................................................................................................. 49
9.10 Diagnostics ................................................................................................................................ 49
10 EnGenius Technologies Inc.: EZ Controller.............................................................................. 50
10.1 EZ Controller Overview............................................................................................................. 50
10.2 Features..................................................................................................................................... 50

4
10.3 Benefits ..................................................................................................................................... 51
10.4 Compatible Devices .................................................................................................................. 52
10.5 System Requirements............................................................................................................... 52
Appendix A – Troubleshooting ........................................................................................................... 53
Appendix B – Specification................................................................................................................. 54
Appendix C – Contacting Technical Support ....................................................................................... 58
Appendix D – Glossary ....................................................................................................................... 59
Appendix E – Statements of Conformity............................................................................................. 64
D.1 Federal Communication Commission Interference Statement........................................................ 64
D.2 Industry Canada Statement .............................................................................................................. 64
D.3 Europe Declaration of Conformity ................................................................................................... 65

5
About This Document
This document is written by EnGenius Technologies, Inc. EnGenius Technologies, Inc. reserves
the right to change this document without notice and all rights are reserved. This document is
written and edited for use of the configuration of the ENH700EXT by EnGenius Technologies,
Inc. Please read this document carefully before setting up the ENH700EXT. Any damage which is
caused by inappropriate use will not be covered under the warranty.
About EnGenius
EnGenius is an industry expert in wireless communications and radio frequency (RF) technology.
The company pioneered “Affordable Long-Range Wireless” communication solutions, and
creates wireless voice and data products for home, SOHO, and SMB use that are versatile,
feature-rich, business-class and affordable. Our complete line of award-winning devices is
designed to deliver long-range, fast speeds, robust security, and ease-of-use.
Product Manual Formatting
The following symbols are using in the ENH700EXT Product manual to highlight key items.
Caution: This symbol represents a vital message and is critical for the device
and/or its settings.
Note: This Symbol represents an important message of the settings.
Tip: This symbol represents an alternative choice that can save time or
resources.
Before You Start
The following equipment is required to setup the ENH700EXT:
•Computer Desktop or Laptop (Windows®, Macintosh®, or Linux-Based with Ethernet
Adaptor)
•CAT 5E or CAT 6 Ethernet Cables (QTY: 2)
•EnGenius Technologies, Inc. ENH700EXT
•Ethernet crimping tool
•Screw driver set

6
•Refer to Chapter 2 for additional equipment that may be needed based on the network
infrastructure.
1Product Overview
Thank you for purchasing the ENH700EXT. It is a powerful and enhanced Enterprise class
Dual-Band Wireless-N Access Point product with 4 multi-functions: Access Point, Client Bridge,
WDS (AP & Bridge), and Client Router.
The EnGenius Technologies, Inc. ENH700EXT uses the latest IEEE802.11 standard,
802.11n, which allows for faster wireless throughput. The ENH700EXT affords a great
advantage to minimize the time and cost required to expand an existing business network. It
operates in both 2.4 GHz and 5 GHz frequency spectrums and is also backwards compatible
with legacy 802.11a/b/g networking equipment.
The ENH700EXT is easy to install in virtually any locations with its included PoE (Power
over Ethernet) injector for quick outdoor installation. In addition, the ENH700EXT enables
network administrators to control its transmit power and features settings for selecting narrow
bandwidth and traffic shaping. The ENH700EXT supports wireless encryption including Wi-Fi
Protected Access (WPA-PSK/WPA2-PSK), [64/128/152]-bit WEP Encryption, and IEEE 802.1x
with RADIUS. Additionally, the ENH700EXT can be paired with other EnGenius Technologies, Inc.
Outdoor Wireless Access Point and Bridge products in Access Point – Client Bridge or WDS
Bridge – WDS Bridge deployments.
Damage may occur if installing with another PoE adaptor that is not provided
with the ENH700EXT.
1.1 Contents
Open the ENH700EXT Wireless Access Point / Client Bridge package to ensure that all the
following contents are present:
•EnGenius Technologies, Inc. ENH700EXT Wireless Access Point / Client Bridge
•48V/380mA Power Adaptor
•PoE (Power Over Ethernet) Injector (EPE-48GR)
•2.4 GHz 5dBi Onmi Antenna (x 2) and 5 GHz 5dBi Onmi Antenna (x 2)
•Mounting Kit with Bracket-Mount Special Screw Set
•Mounting Installation Guide
•ENH700EXT Quick Installation Guide

7
•ENH700EXT Product CD - includes EZ Controller Access Point Management Software
and ENH700EXT User Manual in Adobe Acrobat PDF)
Do not discard the packing materials in case of a return. The unit must be shipped in its original
packaging for a valid return. If any of the contents are missing, please contact your reseller.
Using a power adaptor other than the one included with the ENH700EXT may
cause damage to the device and void the product warranty.
1.2 Features and Benefits
Dual Mode
Simultaneously transmits wireless signals in both the 2.4GHz and
5GHz frequency spectrums. This expands the number of wireless
client devices that can access the network.
Separate Mode Each one of the two radio having its own operation mode. This
increase more options to have a flexible wireless network design.
Access Point Mode The most typically used operation mode for the ENH700EXT. In
Access Point mode, the ENH700EXT will allow wireless devices
access to transmit and receive data from ENH700EXT
Client Bridge Mode In this mode, the ENH700EXT can connect to another Access
Point to extend the range of the wireless network.
Client Router Mode In this mode, the ENH700EXT can be used as a Client Bridge but
with support for a WAN type of Internet connection. This is
rarely used in commercial environment.
WDS AP With this mode selected, the device can pair with other devices
with either WDS AP mode or WDS STA mode. When connected
with other ENH700EXT with WDS AP, the device acts as AP plus
WDS bridge, therefore repeater function is available while with
significant performance cut; When paring WDS AP to WDS STA to
other devices (point-to-multipoints), transparent bridging is
supported.
WDS Station mode
WDS Station (STA) pairs with WDS AP mode. see above
WDS Bridge mode
In the WDS Bridge Mode, the ENH500 can wirelessly connect
different local area networks by configuring each device’s MAC
address and security settings. WDS Bridge mode provide
transparent bridging function. unlike Access Point Mode. APs
linked by WDS are using the same wireless channel, and
connecting excessive numbers of APs on the same channel may
result in lower throughput. Please be aware to avoid loop
connections; otherwise enable the Spanning Tree Function.
Multiple SSIDs
The ENH700EXT supports up to 16 SSIDs (Service Set Identifiers)

8
in Access Point mode (8 SSIDs per frequency band). The following
options can be set to each SSID:
•SSID for public or private network
•Each SSID can be suppressed
•Authentication is fully supported
•
VLAN Identifier
WMM This feature provide QoS (Quality of service) for prioritizing
multimedia traffic.
Wi-Fi Protected Access Wi-Fi Protected Access is a standards-based interoperable
security enhancement that increases the level of data protection
and access control for existing and future Wireless LAN systems.
It is compatible with the IEEE802.11i standard WPA that
leverages TKIP and 802.1x for authenticated key management.
High Speed Data Rate
(Up to 300 Mbps)
As specified in the IEEE802.11n standard; capable of handling
heavy data payloads such as HD Video Streaming.
High Output Power
(Up to 27 dBm)
Designed to extend range and maximize signal coverage area.
IEEE 802.11 a/b/g/n
Compliant
Fully interoperable with IEEE 802.11 a/b/g/n compliant devices.
MAC Address filtering in
Access Point mode
Allows network administrators to grant network access only to
computers and other devices based on their known MAC (Media
Access Control) addresses
Support RSSI Indicator in
Client Bridge mode
Enables device installer to select the best signal when aiming to
Access Points therefore to have proper installation
Power-Over-Ethernet Enables installers to connect the ENH700EXT to a switch via
Ethernet in locations where a power outlet may be unavailable.
(NOTE: The ENH700EXT includes the proprietary PoE Adaptor,
EPE-48GR).
IP 68 The ENH700EXT'S housing is rated with IP68, which is highest IP
rating with total water and dust proof. so it to be placed on a
building’s exterior for maximum range and coverage and allows
it to operate in the extremely harsh environmental conditions.

9
1.3 A Cost-Effective Wireless Solution to Extend and Expand an Existing Network
The following list describes the solutions that the ENH700EXT offers as a flexible, robust and
powerful Outdoor Access Point or Bridge:
•Difficult-to-Wire Environments - In outdoor environments sometimes extending a
network by laying Ethernet or fiber cabling is either cost prohibitive or physically not
possible. The ENH700EXT, enables the extension of an existing company network via the
propagation of a wireless signal rather than cable as a much more cost-effective
alternative.
•Temporary Workgroups – Creating a wired network infrastructure for a temporary
outdoor worksite/workgroup or special event venue may not be a cost- or time-efficient
solution and may present deployment issues if trenches for cabling cannot be dug in
existing landscaping. The ENH700EXT enables companies, in a matter of minutes, to
create an outdoor wireless network that can provide Internet access (based on an
existing broadband connection) or access to the company’s networked resources like
printers, hard drives and databases.
•Wireless Extensions of Ethernet Networks – The range of a wired network is typically
limited within the confines of a single building. In situations where there are multiple
buildings on a campus or another company building very remote from the main building
then a Wireless Access Point or Bridge deployment using the ENH700EXT provides a
very cost-effective way to cover large outdoor areas around a company office or even
connect to other company buildings.
•Expanding User Capacity and Connectivity To Additional Devices – The ENH700EXT is
designed specifically to extend and expand existing company networks. Its high transmit
power capability and enhanced receive sensitivity results in the ability for a company to
connect to more employees, company guests or other wireless clients. The
ENH700EXT’s additional 5GHz frequency radio can be act as a separate AP or bridge to
either provide 5GHz wireless access to 5GHz clients; Or connect to other 5GHz devices
to provide backhaul service.
•Redundancy – In situations where a portion of an existing wired network may fail, the
ENH700EXT offers a measure of stability and redundancy to other employees can
continue to communicate with one another or access mission critical databases.

10
1.4 Hardware Overview
Physical Interface
10/100/1000 LAN Port with (48v Proprietary) PoE Support
Maximum Wireless Data Rate
300Mbps + 300Mbps
Antennas 2.4 GHz – 5dBi Omni directional antenna x2
5 GHz – 5dBi Omni directional antenna x2
1.5 System Requirements for Installation
The minimum requirements for settings up the ENH700EXT are:
•A computer with an Ethernet interface and a Windows
(XP, Vista, 7), Mac OSX, or Linux based Operating
System.
•An Internet browser the supports HTTP and JavaScript.
2Installation and Setup
This chapter will describe how to assemble and set up the ENH700EXT. It will also cover where
to place the ENH700EXT to allow for maximum range and signal.

11
Only experienced installation professionals who are familiar with outdoor
wireless network should attempt to install the ENH700EXT.
2.1 Installation Considerations
There are many considerations on where to place the ENH700EXT. The followings are the main
considerations on where to mount the device. The first consideration is available line of sight to
the area or building that you wish to provide wireless network connectivity. Other buildings,
mountains, hills, trees, thick brush can all attenuate the or inhibit the wireless signal.
The second consideration is distance. You should calculate the EIRP (Effective Isotropic
Radiated Power) correctly to properly configure the ENH700EXT using this calculation for the
distance you intend to build the wireless link (see Glossary at the end of this manual for the
EIRP formula). Don't place multiple ENH700EXT’s too far away from one another since the AP
uses default Omni directional (not directional) antennas. If you plan to have a longer range
connection, you can consider identically-matching directional antennas to connect to the
ENH700EXT on both transmit and receiving ends.
2.2 Assembling the ENH700EXT
Carefully remove the ENH700EXT unit, the Omni 5dBi and 2.4dBi Antennas(two each), EPE-
48GR PoE Injector, and power adaptor. As mentioned earlier in this Manual, the Ethernet cables
are required and not provided within the ENH700EXT package.
1. Install all 4 antennas onto the ENH700EXT by screwing them toward the ENH700EXT
until the threads on the screw are not visible.
2.
Ensure that all antennas screw on straight. Failure to do so may
damage the ENH700EXT antenna connectors
3. Insert a shielded Ethernet cable into the RJ-45 port on the ENH700EXT. You need to
consider the length of this cable based on the distance from where the PoE injector is
which in a weather protected place such as indoor or a water tight box to the
ENH700EXT. Use high quality cable is highly recommended.
4. Insert the other end of the Ethernet cable to the EPE-48GR PoE Injector on the port
labeled AP/Bridge.
5. Take a second Ethernet cable and connect it to the Network port of the EPE-48GR PoE
Injector.

12
6. Insert the other end of the second Ethernet cable into the Ethernet controller of the
computer system in which the ENH700EXT will be set up.
7. Plug the power cord of the power adapter into the EPE-48GR port labeled DC IN.
8. Plug the power adaptor into the power outlet.
The ENH700EXT provides a proprietary PoE adapter. Please only use the
supplied PoE adapter and its power adapter.

13
2.3 Configuring a TCP/IP connection on Windows® 7/Vista
Use the following procedure to configure a computer running Microsoft®Windows 7.
1. In the Start menu search box, type: ncpa.cpl
2. When the Network Connections List appears, right-click the Local Area Connection icon and
click Properties.

14
3. In the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
4. In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the
ENH700EXT, and the default gateway which is the ENH700EXT’s IP address, 192.168.1.1. Note:
the subnet mask must match that of the ENH700EXT and the IP address must be on that subnet.
5. Click the OK button to save your changes and close the dialog box.
6. Click the OK button again to save your changes.
Configuring Microsoft® Windows Vista
Use the following procedure to configure a computer running Microsoft®Windows Vista with
the default Windows interface.
1. On the Windows taskbar, click Start, click Control Panel, and then select the Network
and Internet icon.
2. Click View Network Status and tasks and then click Manage Networks Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Continue. The Local Area Connection Properties dialog box appears.

15
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol
(TCP/IPv4) is checked. Then select Internet Protocol (TCP/IPv4) and click the Properties button.
The Internet Protocol Version 4 Properties dialog box appears.
6. In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the
ENH700EXT, and the default gateway which is the ENH700EXT’s IP address, 192.168.1.1. Note:
the subnet mask must match that of the ENH700EXT and the IP address must be on that subnet.

16
7. Click the OK button to save your changes and close the dialog box.
8. Click the OK button again to save your changes.

17
2.4 Configuring a TCP/IP connection on Windows® XP
Use the following procedure to configure a computer running Microsoft®Windows XP with the
default Windows interface.
1. On the Windows taskbar, click Start, click Control Panel, and then click Network and
Internet Connections.
2. Click the Network Connections icon.
3. Click Local Area Connection for the Ethernet adapter connected to the ENH700EXT. The
Local Area Connection Status dialog box appears.
4. In the Local Area Connection Status dialog box, click the Properties button. The Local Area
Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IP)
is checked. Then select Internet Protocol (TCP/IP) and click the Properties button. The Internet
Protocol (TCP/IP) Properties dialog box appears.
6. In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the
ENH700EXT, and the default gateway which is the ENH700EXT’s IP address, 192.168.1.1. Note:
the subnet mask must match that of the ENH700EXT and the IP address must be on that subnet.
7. Click the OK button to save your changes and close the dialog box.

18
8. Click the OK button again to save your changes.
2.4.1 Configuring Apple® Mac OS X
The following procedure describes how to configure TCP/IP on an Apple®Macintosh running
Mac OS X 10.2 or later. Note: The menu titles and placement vary in each OS X (10.x) operating
system but are similar.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that the NIC connected to the ENH700EXT is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Manually.
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
5. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH700EXT, and the Router
which is the ENH700EXT’s IP address, 192.168.1.1. Note: the subnet mask must match that
of the ENH700EXT and the IP address must be on that subnet.
6. Click Apply Now to apply your settings and close the TCP/IP dialog box.
In Step 2, if the Configure IPv4 menu list isn’t available, select Advanced. In the
TCP/IP tab, you will be able to enter the information in Step 4.

19
2.5 Logging onto the ENH700EXT
After completing the TCP/IP settings from the beginning of the Chapter, you can now access the web-
based configuration menu.
1. Open your web browser.
2. Enter IP 192.168.1.1 into your address bar.
The default username of the ENH700EXT is admin. The default password of the
ENH700EXT is admin. If you have changed the ENH700EXT LAN IP address,
make sure to enter the correct IP Address.
3Wireless Network Modes
This chapter will explain the different operation modes that the ENH700EXT has to offer. This
will help in determining how you would like to set up the ENH700EXT for the proper mode for
your specific networking needs in the later chapters of the User Manual.
The three native operation modes of the ENH700EXT are Access Point, Client Bridge, and WDS
(WDS AP, WDS STA, WDS Bridge). Both Radio 1 and Radio 2 support these modes.
3.1 Access Point Mode (AP mode)
Access Point Mode is the most typically used mode for the ENH700EXT. In Access Point mode,
the ENH700EXT extends an existing network by providing signal coverage outside of a building
creating a Wireless LAN enabling employees or company guest to access the company network
and the company’s broadband Internet connection as designated and authorized by the
network administrator. Stations and clients must utilize the same SSID and Security Password
to associate while within range of the wireless signal.