Entes ES3 Series User manual

1
User Manual
ES3 Series
3 Phase Energy Meter
www.entes.eu

2
Contents
Safety Warnings........................................................................................................ 3
1.Introduction.................................................................................................................. 4
1.1 General Specications ........................................................................................ 4
1.2 Mechanical and Environmental Conditions......................................................... 5
1.3 Standards............................................................................................................ 5
1.4 Technical Specications:..................................................................................... 5
1.5 Technical Drawing .............................................................................................. 7
1.6 Connection Diagram ........................................................................................... 7
1.7 Terminal Structure............................................................................................... 7
1.8 Display and GUI design ...................................................................................... 8
1.8.1 Front Panel View ....................................................................................... 8
1.8.2 Key Functions............................................................................................ 8
1.9 Icons ................................................................................................................... 9
2. Usage of Device ....................................................................................................... 9
2.1 Device Opening .................................................................................................. 9
3. Menus ........................................................................................................................ 10
3.1 Menu Functions .................................................................................................. 10
3.1.1 Measurement............................................................................................. 10
3.1.1.1 Voltage................................................................................................ 10
3.1.1.2 Frequency........................................................................................... 12
3.1.1.3 Current................................................................................................ 12
3.1.2 Power Menu.............................................................................................. 13
3.1.2.1 Active Power ....................................................................................... 13
3.1.2.2 Reactive Power................................................................................... 14
3.1.2.3 Apparent Power ................................................................................. 15
3.1.3 Energy Menu ............................................................................................ 16
3.1.3.1 Active Import Energy........................................................................... 16
3.1.3.2 Active Export Energy ......................................................................... 16
3.1.3.3 Import Inductive Energy..................................................................... 16
3.1.3.4 Export Inductive Energy..................................................................... 17
3.1.3.5 Import Capacitive Energy .................................................................. 17
3.1.3.6 Capacitive Export Energy .................................................................. 17
3.1.3.7 Import Apparent Energy..................................................................... 17
3.1.3.8 Export Apparent Energy...................................................................... 18
3.1.3.9 Generator Active Energy.................................................................... 18
3.1.3.10 Generator Apparent Energy............................................................. 18
3.1.4 Settings...................................................................................................... 18
3.1.4.1 User Settings ...................................................................................... 18
3.1.4.3 SETLOG ............................................................................................. 22
3.1.4.4 SET SCROLL...................................................................................... 23
3.1.4.5 RS485 ................................................................................................ 24
3.1.4.6 Ethernet Settings ................................................................................ 25
3.1.4.7 I/O ....................................................................................................... 27
3.1.4.8 Alarms................................................................................................. 28
3.1.4.9 Time .................................................................................................... 30
3.1.4.10 System.............................................................................................. 32
3.1.4.11 Reset................................................................................................. 32

3
Safety Warnings
Caution
Failure to follow the instructions below may result in serious injuries or even death..
• Disconnect all power when installing the device.
• Do not remove the front panel while the device is connected to the mains.
• Do not clean the device with solvent or similar material. Use only a dry cloth.
• Check that the connections are correct before operating the device.
• Contact your authorized dealer if you have any questions about your device.
• The device is for panel mounting only.
• The fuse to be used must be type F and the current limit value must be 1A.
The manufacturer cannot be held responsible for unwanted situations that may emerge due to failure
to follow the measures above.
Security
Read the entire operating manual before using the device.
• Connect a switch or a circuit breaker between supply inlets of the product and the mains.
• This switch or circuit breaker must be close to the product.
• Place a mark to indicate that this switch or circuit breaker will be used to separate the product from
the mains.
Warranty
The warranty period of the device is 2 (two) years. In case of a malfunction, the product should be
repaired by the manufacturing company only. Otherwise, the warranty will be void.

4
1.Introduction
1.1 General Specications
• Wide supply range
• 3-Phase Voltage 3-Phase Current measurement
• Active, Reactive , Apparent Energy Measurement
• Alarm options (8 pieces)
• Power Measurement
• 2 Digital input-output
• Auto Scroll Mode
• Seal cap
• 8+1 programmable tari󰀨s
• DIN4 Top entry, bottom exit rail mounting
• Segment LCD display
• Notication LED
• kWh/kWAh impulse LED
• RS-485 / Ethernet / M BUS communication options
ES Series ENTES is a new generation 3-phase electricity meter. It is designed to measure active,
reactive and apparent energy in 3 phase and 1 neutral connected system. It also shows the ener-
gy produced and supplied to the network together with the energy consumed in separate endexes.
There are also resettable endexes besides the main ones.
It has a real time clock and a battery to protect the clock from power cuts.
There are 8 di󰀨erent tari󰀨 indexes. Each day of the week can be divided into 48 parts in 30-minute
segments and assigned to that segment from these 8 tari󰀨s. 8 di󰀨erent special tari󰀨s can be dened
within 1 year. Special days can be a public or religious holiday. By entering the starting date and time
and the ending date and time, it is ensured that the tari󰀨 assigned in this interval is valid. When a tar-
i󰀨 is active, active and apparent import energies are written into that tari󰀨 along with the main endex.
• In addition to energy measurement, it can be monitored on the display and through communication
by measuring current, voltage, frequency and power.
• There are demand and max demand function for currents and powers. Demand time can be ad-
justed. It keeps max demand value in permanent memory.
• It can take all or the desired ones from Energy, Power, Voltage, Current and Pulse logs in adjusta-
ble periods. It also keeps event records in permanent memory.
• There are 2 pulse LEDs for active and reactive energy on the front panel. It has 500 pulses per
kWh and kVArh.
• It has 2 digital inputs. One of them can be used as generator input. When it is active, the counter
writes the measured energy to the generator endexes. Digital inputs can also be set as pulse input.
In this case, in addition to the counter, di󰀨erent counters such as water and natural gas counters with
pulse output circuits can be connected to provide remote access to such counters. If the function of
digital inputs is selected as remote, their status is only read over communication.
• It has 2 digital outputs. It can be selected as remote, alarm or pulse. When Remote is selected,
their positions are changed through communication. If the alarm function is selected, they can be
assigned as output to any user alarm. If the pulse function is activated, it can be provided to generate
pulses according to the selected energy type and pulse rate.
• User alarms can be dened for demands.
• The parameters shown on the screen start to scroll after the last button use, if activated. Respec-
tively; Total Active Import Energy, T1 - T8 tari󰀨 energy indexes, total active export energy, total induc-
tive import energy, total capacitive import energy, date and time are displayed. Display duration of the
pages can be adjusted.

5
1.2 Mechanical and Environmental Conditions
Operating Conditions Value Range
Dimensions DIN4
Installation Rail
IP protection IP51
Display Segment LCD
Button 4 x Universal Interface
Storage Temperature -25/+55 °C
Operating Temperature -30/+80 °C
Maximum Humidity 95% (noncondensing)
1.3 Standards
EN 50470-1
EN 50470-3
EN 62053-23
EN 62053-61
EN 62054-21
1.4 Technical Specications:
ES3-63LS ES3-80LS ES3-63LE ES3-80LSE
Supply Voltage From the measurement input
Power Consumption <2W
Voltage Range 85 – 265V
Current Range 0,02-63A 0,02-80A 0,02-63A 0,02-80A
Active Energy Measurement Class B(EN-50470-3)
Reactive Energy Measurement Class 2(EN-62053-23)
Current Measurement Class ± 0.5%
Voltage Measurement Class ± 0.5%
Power Measurement Class ± 1%
Starting Current Ist 0,02A
Minimum Current 0,25A
Transitional Current Itr 0,5A
Referance Current Iref 5A
Maximum Current 63A 80A 63A 80A
Active Energy Counter Constant 500imp/kWh
Reactive Energy Counter Constant 500imp/kVArh
Active Energy Pulse Inducator RED LED
Reactive Energy Pulse Inducator RED LED
Energy Display 7+1

6
Baud Rate Adjustable 2400/ 4800/ 9600/19200/38400/57600/115200
Adress Adjustable 1-247
Parity Adjustable Single / Double / None
Internal Memory 16 MB
Demand Time Adjustable 1-60 minute(s)
Log Time Adjustable 1/2/5/10/15/20/30/60 minute(s)
Backlight Duration 30s
Autoscroll Time 45s
Autoscroll Window Transition
Time
Adjustable 1-60s
Dimensions 35mm rail installation DIN-4
Button 4 x Universal Interface
Number of Digital Input 2
Digital Input Voltage Range 5-24VDC 30Vmax
Number of Digital Output 2
Digital Output Voltage Range 5-24VDC 30Vmax
Digital Output Open Collector
Max Current
30mA
Time Clock Accuracy ±0.5 s/day
Pulse Output Parameter Adjustable Active Import/Active Export/Capasitive Import/Capa-
sitive Export/Inductive Import/Inductive Export/Apparent Import/
Apparent Export/Active Generator/Apparent Generator Energy
Pulse Rate Adjustable 1/10/100/1000/10000/100000/1000000 W/VA/Var h/
imp
Battery (for RTC) Replaceable CR 2032
Battery Life 10 years

7
1.5 Technical Drawing
71
91
58
44,5
1.6 Connection Diagram
L1
L1
L2
L3
N
In In In In
L2 L3
L1
Out Out
O1 OCO 2 OC
A
In1I n2 InC
Out
L2
YÜK / LOAD
L3
N
B Gnd
ETH
L1
L1
L2
L3
N
In In In In
L2 L3
L1
Out Out
O1 OC O2 OC
A
In1 In2 InC
Out
L2
YÜK / LOAD
L3
N
B Gnd
1.7 Terminal Structure
Modbus Ethernet
Main Terminal Cable Section 2,5 – 25mm22,5 – 25mm2
Digital Input Cable Section 1,5mm21,5mm2
Digital Output Cable Section 1mm21mm2
Communication Cable Section 1,5mm2 RJ45

8
1.8 Display and GUI design
1.8.1 Front Panel View
Notication
LED
Reactive
Energy Pulse
LED
Active Energy
Pulse LED
Output 1 & 2Input 1 & 2
1.8.2 Key Functions
Button
Description Home Up Down OK

9
1.9 Icons
Icon Description Icon Picture
Settings
Home
Up and down
Capacitive
Inductive
OK
Tari󰀨
Battery Level
(When the battery runs out, the icon lights up)
Critical Connection Error
Seal Cover
Auto Scroll
Obis Codes
Total Active Import Energy= “1.8.0”
T1 Active Import Energy = “1.8.1”
T2 Active Import Energy = “1.8.2”
T3 Active Import Energy = “1.8.3”
T4 Active Import Energy = “1.8.4”
T5 Active Import Energy = “1.8.5”
T6 Active Import Energy = “1.8.6”
T7 Active Import Energy = “1.8.7”
T8 Active Import Energy = “1.8.8”
Generator Active Import Energy = “1.8.9”
Total Active Export Energy = “2.8.0”
Inductive Import Energy = “5.8.0”
Inductive Export Energy = “7.8.0”
Capacitive Import Energy = “8.8.0”
Capacitive Export Energy = “6.8.0”
L1 Voltage = “32.7.0”
L2 Voltage = “52.7.0”
L3 Voltage = “72.7.0”
L1 Current = “31.7.0”
L2 Current = “51.7.0”
L3 Current = “71.7.0”
Frequency = “14.7.0”
Date = “0.9.2”
Clock = “0.9.1”
2. Usage of Device
2.1 Device Opening
At the rst start of your device, the language selection menu will appear and Tutorial Mode will be
active. After the tutorial mode screens, you can see the Region Selection, (Hour Setting, Minute Setting,
Second Setting), Date Setting, (Enter Year, Enter Month, Enter Day), Nominal Hz, Nominal Voltage,
Counter Type conguration screens. If the power is cut o󰀨 without saving the settings, these setting
selections will be displayed again at the next startup.

10
3. Menus
Your device has 4 main menus. These main menus are as follows;
• Measurements
• Power
• Energy
• Settings
3.1 Menu Functions
You can see the menu related functions in this section.
3.1.1 Measurement
Measurement menus appear on this screen. You can enter the detail menu by pressing the OK button.
3.1.1.1 Voltage
Phase-Neutral 1 voltage values of the phases are displayed in this menu. Pressing the OK button,
you can switch between the Minimum Voltage (Phase-Neutral) and Maximum Voltage (Phase-Neutral)
menus with the up&down buttons.
Phase-Neutral 2 voltage values of the phases are displayed in this menu. Pressing the OK button,
you can switch between the Minimum Voltage (Phase-Neutral) and Maximum Voltage (Phase-Neutral)
menus with the up&down buttons.
Phase-Neutral 3 voltage values of the phases are displayed in this menu. Pressing the OK button,
you can switch between the Minimum Voltage (Phase-Neutral) and Maximum Voltage (Phase-Neutral)
menus with the up&down buttons.

11
Phase-Phase 1-2 voltage values are displayed in this menu. You can switch between the Minimum
Voltage (Phase-Phase) and Maximum Voltage (Phase-Phase) menus with the up&down buttons by
pressing the OK button.
Phase-Phase 2-3 voltage values are displayed in this menu. You can switch between the Minimum
Voltage (Phase-Phase) and Maximum Voltage (Phase-Phase) menus with the up&down buttons by
pressing the OK button.
Phase-Phase 3-1 voltage values are displayed in this menu. You can switch between the Minimum
Voltage (Phase-Phase) and Maximum Voltage (Phase-Phase) menus with the up&down buttons by
pressing the OK button.

12
3.1.1.2 Frequency
You can view the Frequency menu by pressing the up&down buttons. You can switch between the
minimum and maximum menus with the up&down buttons by pressing the OK button.
3.1.1.3 Current
This screen displays the current values measured instantaneously for each Phase. You can see the
values of Min Current (Phase-Neutral), Max Current (Phase-Neutral), Demand (Phase-Neutral) and
Max Demand (Phase-Neutral) by pressing the OK button.
Below you can see the current value in phase L 1.
You can switch between the Minimum, Maximum, Demand and Maximum Demand menus with the
up&down buttons by pressing the OK button.
Below you can see the current value in phase L 2.

13
You can switch between the Minimum, Maximum, Demand and Maximum Demand menus with the
up&down buttons by pressing the OK button.
Below you can see the current value in phase L 3.
You can switch between the minimum, maximum, demand and maximum demand menus with the
up&down buttons by pressing the OK button.
3.1.2 Power Menu
Power menus appear on this screen. You can enter the detail menu by pressing the OK button.
3.1.2.1 Active Power
You can access Active Power menu with up&down buttons in the power menu.

14
You can switch between the Minimum, Maximum, Demand and Max Demand menus with the up&
down buttons by pressing the OK button.
You can switch between active powers belonging to phases with up&down buttons.
3.1.2.2 Reactive Power
You can access Reactive Power menu with up&down buttons in the power menu.
You can switch between the Minimum, Maximum, Demand and Max Demand menus with the up&down
buttons by pressing the OK button.

15
You can switch between reactive powers belonging to phases with up&down buttons.
3.1.2.3 Apparent Power
You can access the Apparent Power menu with the up&down buttons in the power menu.
You can switch between the Minimum, Maximum, Demand and Max Demand menus with the up&
down buttons by pressing the OK button.
You can switch between apparent powers belonging to phases with up&down buttons.

16
3.1.3 Energy Menu
Energy menus can be seen on this screen. You can enter the detail menu by pressing the OK button.
3.1.3.1 Active Import Energy
You can view the Active Import Energy screen by pressing the OK button.
You can switch between tari󰀨s by pressing the OK button.
3.1.3.2 Active Export Energy
You can access Active Export Energy menu with up&down buttons in the energy menu.
3.1.3.3 Import Inductive Energy
You can access the Generator Inductive Energy menu with the up&down buttons in the energy menu

17
3.1.3.4 Export Inductive Energy
You can access the Generator Export Energy menu with the up&down buttons in the energy menu.
3.1.3.5 Import Capacitive Energy
You can access the Capacitive Energy menu with up&down buttons in the energy menu.
3.1.3.6 Capacitive Export Energy
You can access the Capacitive Export Energy menu with up&down buttons in the energy menu.
3.1.3.7 Import Apparent Energy
You can access the Apparent Energy menu with up&down buttons in the energy menu.
You can switch between tari󰀨s by pressing the OK button

18
3.1.3.8 Export Apparent Energy
You can see the Export Apparent Energy menu with up&down buttons in the energy menu.
3.1.3.9 Generator Active Energy
You can access the Generator Active Energy menu with up&down buttons in the energy menu.
3.1.3.10 Generator Apparent Energy
You can access the Generator Apparent Energy menu with the up&down buttons in the energy menu.
3.1.4 Settings
You can congure the setting parameters of the device by entering the settings menu. If you want to
make an operation in the settings menu or make changes in the current settings, you can enter the
menu detail with the help of the OK button and change the device or user settings in the Settings menu.
3.1.4.1 User Settings
You can congure user settings by pressing the OK button.
3.1.4.1.1 User Language Setting
This is the menu where you can set the language for your device. After pressing the OK button, you can
choose between Turkish, French, German and English language options with the up and down buttons.

19
3.1.4.1.2 Screen Light Setting
This is a sub-menu where you can adjust the Display Light for your device. You can make the changes
you want to make regarding the device screen light in Settings- User Settings- BACKLIGHT submenu.
When you enter the menu, the device will o󰀨er you the Yes, No and Automatic options. If you want the
background light to be lit continuously, select Yes, if you want the background to be turned o󰀨 No, if you
want the background light to ash for a certain time and then turn o󰀨 the automatic option.
3.1.4.1.3 User Security Settings
If you want the password option to be active or inactive on your device, you can change this setting
in the Settings-User Settings-USER SECURITY submenu. By choosing Yes or No, you can turn the
security on or o󰀨.

20
3.1.4.1.4 User Password Settings
You can make changes to your current password by entering Settings- User Settings- USER
PASSWORD submenu. On this screen, you can create the password you will use for the security of the
device. On the rst screen, the current password is entered. If it is entered correctly, the ENTER NEW
PASSWORD screen appears. The ENTER AGAIN screen appears to conrm the new password. In
order for the new password to be active, the save conrmation must be selected as YES when exiting
the settings, as in all settings.
3.1.4.1.5 User Face Setting (Smiley Mode)
You can change the settings related to the smiley mode in the Settings- User Settings- USR.SMILEY
menu. You can save the change by selecting one of the options yes (smiley mode is active) or no
(smiley mode is disabled).
3.1.4.1.6 User Mode Settings
It is the screen where the user mode is selected. User mode can be selected as simple or advanced.
Some parameters below are active in advanced user mode (changes on the basis of parameters).
The menus active in the advanced user mode are: Log settings, Baud rate setting and Parity setting.