Entryvue 13515 User manual

The designs and specifications of this manual can be changed without
notification to the customer/user. All copyrights and interpretation rights
are reserved to Entryvue.
Version2.0.1.1.3.28
VIDEO DOOR PHONE SYSTEM
USER MANUAL (English)
Item No. : 13515 & 13516
Manual
Monitor
Monitor
Memory
Playback
Album User Setup
03/15/2011 Fri.10:12 AM
Close
Intercom Multimedia
1
2
3
4About

CONTENTS
CONTENTS
1. Parts and Funcons - - - - - - - - - - - - - - - - - - - - - 1
2. Monitor Mounng - - - - - - - - - - - - - - - - - - - - - - 1
3. Operaon Instrucons - - - - - - - - - - - - - - - - - - - 2
4. Basic Setup Instrucons - - - - - - - - - - - - - - - - - - 4
5. Built-in Memory and SD Card - - - - - - - - - - - - - - 7
6. Specificaon - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Please read this manual carefully before using the
product, and keep it well.
1. Parts and Funcons
2. Monitor Mounng
145~160 cm
●Use the screws to fix the Mounng Bracket on the wall.(accessories include a
Bracket, two 4X25 screws (use to fasten the MounngBracket), 2 wire cables (use
to connect with Monitor)).
●Connect the system correctly. then hang the Monitor on the Mounng Bracket
firmly.
Indicator
Screen
UNLOCK Buon
TALK/MON Buon
MENU Buon
Microphone
Speaker
SD card slot
Connecon Port
Mounng Hook
1 2 3 4 5 6
ON
DIPS
L1
BT1 BT2 EH GND VD
L2
Manual
Monitor
Monitor
Memory
Playback
Album User Setup Close
Intercom Multimedia
Mounng Hook
About
-1-
03/15/2011 Fri.10:12 AM

3. Operaon Instrucons
Answering a Door Call
Door Release
How to Enter Main Menu
●Press CALL buon on door staon. The monitor rings, and the visitor's image will be
seen on screen. If nobody answers the call, the screen will turn off in 30 seconds automacally.
●Press TALK / MON Buon or touch
icon, you can talk with the visitor for
90 seconds. During talking state, press
TALK / MON Buon again or press icon
again to end the conversaon. If the system
connects two or more Monitors, pick up any
Monitor,the others will be automacally shut
off.
●During the conversaon, press UNLOCK Buon or touch icon to unlock the
door. (if two locks are connected to door camera, touch unlock 2nd icon to release
the second lock )
Home
Unlock
Talk
Standard
Screen
Capture
1:1
●Touch the screen anywhere (or press MENU buon )in standby mode, a full
screen calendar will be showed.
●Touch the screen again (or press MENU buon again) to enter main menu.
03/15/2011
10:12
Fri.
-2-
Manual
Monitor
Monitor
Memory
Playback
Album User Setup Close
Intercom Multimedia
About
●Intercom Call by namelist: User in one apartment can call other apartments in the
system. Touch Intercom item on main menu page ,then touch Intercom
byNamelist icon (the namelist will be created automacally by the system). Select
a name on the screen then touch Dial Numbericon to call. Press icon to
enter last/next name list page. (Touch Dial Number icon again to redial)
Entrance Monitoring
Intercom Funcon
Press TALK/MON buon on monitor in
standby mode, or touch Monitor icon on
main menu.the screen will display the view
of the Outdoor Staon. During monitoring,
touch Manual Monitor
icon to get into the
camera switching mode, (or directly touch
Manual Monitoricon on main menu page).
if mul Door Staons are installed, you can
press the camera 1/2/3/4 to monitor the Door
Staon or CCTV camera you want. Press
Home icon to exit and enter main menu page.
●Inner Call : If mul Monitors are installed in one user,select and press the Inner Call
item,the other Monitors will ring at the same me,whichever Monitor answers the
call, conversaon is started, and the other monitors will stop ringing at the same me.
●Direct Dial Guard unit : A Monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversaon with the guard person is started.
Intercom
by Namelist
Inner Call Direct Call
Guard Unit
Home
Dial
Number
Last
-Name List-
[0001] Jim,Zhang
[0002] Calo,Liu
[0003] Jacko,Zhang
[0004] Jana,Qiao
[0005] Hebe,Zhang
[0006] Tony,Li Close
Next
-3-
Camera 1 Camera 2 Camera 3 Camera 4
234
1
Home
Monitor
Time
03/15/2011 Fri.10:12 AM
03/15/2011 Fri.10:12 AM
03/15/2011 Fri.10:12 AM

●Touch User Setup icon on main menu
page to enter call tone seng screen, touch
Door staon call tone/intercom call tone/
door bell call tone, 12 pieces ring tones will
be displayed , Choose a ring tone which
you want, then touch icon to save and
exit, the ring tone will be performed. Or
touch icon to unsave and exit.
Ring Volume Seng
You can set a ring volume for day
me, 6:00 AM~8:00 PM is the day me by
default, enter main menu page.then touch
User Setupicon to enter next page, and then
touchRing Volumeicon to enter Ring
Volume page, Use icon to decrease/
increase the volume. Then touch icon to
save and exit, or touchicon to unsave
and exit.
Ring Volume
Night Ring Volume
Ring Volume
6
7
Adjust - Adjust +
Exit&Save
Exit&Unsave
Door Station
Call Tone
Exit&Save
Carman
Ding Dong
Rhythm of the rain
For Elise
Sonatine
Edelweiss
Going Home
Congratulate
Do Re Me
Happy Birthday
Jingle Bell
Telephone Ring
Exit&Unsave
You can acvate a ring volume for night me, 8:00 PM~6:00 AM is the night me by
default,if you don't want to be disturbed at night , you can set the volume to 0.Enter main
menu page, touchUser Setup icon to enter next page, then touch Night Ring
Volume icon to enter Night Ring Volume page, Use icon to decrease/increase the
volume.Aer seng a value you want, you should touch Ring Volume icon to acvate
the seng, aer that the Ring Volume icon will change to Night Ring Volume
icon. then touch hcuotro.demrofrepeblliwemulovgnirthgintixednaevasotnoci
icon to unsave and exit.
Note: TouchNight Ring Volume icon again, you can cancel the night ring volume
seng.
-4-
4. Basic Setup Instrucons
Ring Tone Seng
Night Ring
Volume Night Ring
Volume
4
7
Adjust - Adjust +
Exit&Save
Exit&Unsave
Night Ring
Volume
Adjust - Adjust +
Exit&Save
Exit&Unsave
4
Ring
Volume
●Enter main menu page,thenTouch Manual Monitor icon to enter next page.then
press Monitor Time icon to enter monitor me seng page.
●Input digitals by pressing the digital keypad, and press * icon to change the seng
locaon,and press # icon to save. Sengs will be performed immediately, press
icon to return last page .
●Enter main menu page,then Touch icon to enter next page.and then touch the
screen anywhere and hold for 3s to enter next menu.
Monitor Time Seng
Unlock Parameter Seng
Camera 1 Camera 2 Camera 3 Camera 4
23 41
Home
Monitor
Time
Monitor time set
1
4
7
*
8
0
9
#
65
2 3
min:[01] sec:[30]
Cancel
1 2 3 4
H/W T3-753 a1.3
S/W: V11.01008.00
Voltage: ---
Local addr: 01.00
Unlock timing: 5s
Video standard:
Cancel
Home
Installer
setup
Device
Property
Caliber
TouchScreen
-5-
03/15/2011 Fri.10:12 AM

Screen Seng
Restore to Default
When the Monitor is in monitoring or
talking state, Press Adjusticon to
enter screen seng page.Touch any item
you want,then touch to decrease
or increase the value.Sengs will be
performed immediately. Press icon to
exit out the page.
The restore to default funcon allows
the user to recover the sengs to factory
seng.Note that the restore to default
operaon will not change the me seng
and the datas on buit-in memory or SD
card.
Enter main menu page, then touch
User Setupicon to enter the seng
page, press Restore to default item, the
default sengs will be loaded. press
Home icon to return to home screen page.
5
Brightness
color
scene
Talk Volume
Adjust Return
Adjust - Adjust +
Door Station
Call tone
Intercom
Call tone
DoorBell
Call tone
Clock
Ring
Volume
Night Ring
Volume
Refault to
Default
Home
●Touch Installer setup
icon,a digital
keypad and installaon seng will be
showed on screen.
●Input code number by touching the
digital keypad.According to the le
instrucons, 8010 and 8011 are used
to set the unlock mode(0 and 1 ).
8021~8029 are used to set the unlock
me (1s~9s) .use to cancel the
input,and use to save the seng.
Touch icon to return last page .
Code Number:[----]
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set as master unit 0
[8001]#:Set as slaver unit 1
[8002]#:Set as slaver unit 2
[8003]#:Set as slaver unit 3
[8004]#:Set as guard unit
[8005]#:Set as not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set the lock time of 1s
[8022]#:Set the lock time of 2s
[8023]#:Set the lock time of 3s
[8024]#:Set the lock time of 4s
[8025]#:Set the lock time of 5s
[8026]#:Set the lock time of 6s
[8027]#:Set the lock time of 7s
[8028]#:Set the lock time of 8s
[8029]#:Set the lock time of 9s
1
4
78
0
9
6
5
23
Cancel
Installation settings:
-6-
5. Built-in Memory and SD Card
This Monitor has been equipped with a built-in memory (about 120 MB) together with a
SD card reader. Maximum 16 GB SD card can be supported.
●The monitor can play photos and pictures.
●Photo frame funcon, each photo playing will last 5 seconds, More pictures in the
SD card, longer me for triggering the funcon, 800 pictures are supported in inner
memory. With 2G SD card, more than 30000 pictures can be supported.
●Must use T-views album soware tool to transform the JPG format photos took by
digital camera to TVS format photos that can be viewed on Monitor.
●The captured pictures will be saved in a folder named by date, note that the pictures
recording every day will be saved in different folders which automacally generated
every day.
●The captured pictures in the built-in memory can be copied to the SD card, and you
should use T-views memo soware tool to convert the pictures to JPG format that can
be seen on the computer. (select the pictures (press Ctrl+A to select all)->> click the
right key of the mouse ->>choose transfer selected to JPG item->>save the pictures on
computer)
●When the built-in memory is full, the oldest picture will be deleted to make room for
new record.
●The built-in memory can be formaed by the Monitor, but SD card cannot, you should
format the SD card on computer.
●Avoid to plug in/out the SD card when the monitor is under operaon.
●Playing will be interrupted by the calling from outdoor staon.
Micro SD card
-7-
03/15/2011 Fri.10:12 AM

Picture Recording
Record mes Seng
Picture Playback
Both Auto-Recording and Manual-Recording
are available.and Auto-Recording is default.
If receive a Call , aer 3s, the monitor will
record automacally. or you can touch
Capture icon to record the visitor's image
manually.
Touch Memory Playbackicon on main
menu, 4 pictures will be displayed in the
memo for each page. You can touch
or to enter last or next picture memo, or
touchicon to delete all pictures. And
you can zoom the picture on full screen by
touchhcuot,edomneercsllufno,noci
icon to preview last/next picture. Or
you can touch icon to delete the picture
you are previewing. Press icon to return
home screen page.
You can setup Memo Opons to choose
1/4/8 pictures memo. If 4/8 was chosen,
you will have 4/8 shots for each recording
operaon, and every 1.5 seconds catch a
picture.
Touch Mul Media icon on main menu
to enter next page, then touch Memory
Opons icon, a digital keypad will be showed
on the screen, you can only set the record
mes for 1/4/8 by touching the digital
keypad. Touching other digitals are unvalid.
And press # icon to save. Sengs will be
performed immediately, press otnoci
return last page.
Record times: [ 1 ]
1
4
7
*
8
0
9
#
65
2 3
Cancel
Page Down
Home
Full Screen
Picture 4
2010-9-30 004 2010-9-30 003
2010-9-30 0012010-9-30 002
Picture 3
Picture 1Picture 2
Delete All
Page UP
Recording...
DS1 00:03 Talking
Home
Unlock
Talk
Standard
Screen
Capture
1:1
-8-
6. Specificaon
Photo Playing
Playing me seng
Touch Album icon on main menu to play the photos (must plug in SD card). It can be
played both manually and automacally, use your fingers to slide right or le on screen to
play last/next photo.
Touch Mul Media
icon on main menu
to enter next page, then touchAlbum
Opons
icon,a digital keypad will be showed
on the screen, then you can set the playing
me by touching the digital keypad to input
digitals and press * icon to change the
locaon, and press # icon to save. Sengs
will be performed immediately, press
icon to return last page .
Photo Frame
Power Supply : DC 24V (supplied by Adaptor)
Power Consumpon: Standby 15mA; Working status 400mA
Monitor Screen: 7 Inch color TFT-LCD
Display Resoluon: 800*3(RGB)*480 pixels
Built-in Memory: 120 MB
Picture Memo: 800pcs(inner memory),>30000pcs(2G SD card)
Monitor Dimension: 125(H)×225(W)×23(D)mm
Album time set
1
4
7
*
8
0
9
#
65
2 3
min:[01] sec:[30]
Cancel
-9-