Epson SureColor SC-S70600 Manual

Epson SureColor
Media Setup
SureColor SC-S70600 & SC-S50600
Monday, 3 December 12

Media Setup
•The new SureColor printers have specific setups for
handling media
•It is important that the rollers are set correctly to
allow for faultless operation
•Follow this guide to correctly set up the printer
•Engaging Low Pressure Rollers for Normal printing and
Single Pass printing when using White and Metallic
•Engaging High Pressure Rollers for Multi Pass printing
using White and Metallic
Monday, 3 December 12

Setting the Rollers to be
Engaged and Disengaged
•To disengage rollers move them away from
the Set Marks on the printer
Roller Set Marks
Rollers Disengaged
Monday, 3 December 12

Setting the Rollers to be
Engaged and Disengaged
•To engage rollers move them over the Set
Marks on the printer
Roller Set Marks
Rollers Engaged
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 64 inch media
Disengage High Pressure Rollers
Align Media to edge of Set Mark 1
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 60 inch media
Align Media to edge of Set Mark 2
Disengage High Pressure Rollers
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 54 inch media
Align Media to edge of Set Mark 2
Disengage High Pressure &
unused Low Pressure Rollers
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 50 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 3
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 44 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 3
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 40 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 1
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 36 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 3
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 20 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 3
Monday, 3 December 12

Single Pass Low Pressure
Roller Setup
•Setup for 16 inch media
Disengage High Pressure &
unused Low Pressure Rollers
Align Media to edge of Set Mark 2
Monday, 3 December 12

Multi Pass Printing
•When printing using Multi Pass be aware
that the margin starts 5 mm in from the
High Pressure Roller
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 64 inch media
Engage High Pressure
Align Media to edge of Set Mark 1
Disengage Low Pressure Rollers
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 60 inch media
Engage High Pressure
Align Media to edge of Set Mark 2
Disengage Low Pressure Rollers
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 54 inch media
Engage High Pressure
Align Media to edge of Set Mark 2
Disengage Low Pressure Rollers
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 50 inch media
Engage High Pressure
Align Media to edge of Set Mark 3
Disengage Low Pressure Rollers
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 44 inch media
Engage High Pressure
Align Media to edge of Set Mark 3
Disengage Low Pressure Rollers
Monday, 3 December 12

Multi Pass High Pressure
Roller Setup
•Setup for 40 inch media
Engage High Pressure
Align Media to edge of Set Mark 1
Disengage Low Pressure Rollers
Monday, 3 December 12