Ercol Cantilever 2645 User manual

ercol
2645 cantilever chair
Thank you for purchasing this cantilever chair. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROMYOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
Fittings and parts checklist
Abolt x 4
Bspacers x 4

Step by step instructions
1) Place the seat and back of the chair upside down on a table or flat surface.
2) Place the white spacers (B) on to the seat holes.
3) Place the up turned metal frame onto the seat.
4) Place the bolts (A) in the holes, through into the seat and tighten using the alan key provided.
5) Before tightening the screws completely, check that the frame is lined up with the front edge of
the seat pad
6) Tighten fully