Ercol Teramo 3671 User manual

We strongly recommend that you fix your teramo shelving unit to the
wall for your own safety.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
This item is HEAVY
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 30-45 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
ercol
Thank you for buying this teramo shelving unit. .Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
Teramo 3671 Shelving Unit

Fittings and parts checklist
E M Bracket
F
Left side frame x 1
39
G
H
I
J
K
L
Right side frame x 1
Top panel x 1
Top back cross rail x 1(Width 40mm)
Middle&Bottom back cross rail
(Width 50mm)
x 2
Shelf support rails x 6
Shelf panels x 5
Half moon washer x 18
Allen Key x 1
20mm Screws x 2
Wedges x 2
x 1

Step by step assembly instructions
1. Using 18pcs bolt and half moon washer to fix the top, middle and bottom cross rails and the shelf
support rails onto the side frames. Tighten with allen key as shown below.
.2
I x 18
H x 18
J x 1
I x 21
J x 1
Using 21pcs bolt to fix the 5pcs shelf panles onto the shelf support rails and top panel onto the side
frame and top shelf support rail. Tighten with allen key as shown below.

Wall fixing - if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. See fig.1 below. Screw one of the brackets on to the back of the unit in the middle, using the short
screws provided. Make sure the TOP OF THE BRACKET IS BELOW the top of the . Position the
against the wall where you want it to go, place the second bracket onto the wall below the one
fixed to the and mark where the holes come on the wall. Move the away from the wall.
2. Attach the wall bracket using screws suitable for your type of wall, see Wall fixings above.
3. Place the back against the wall so the two brackets match up and tie them together with
the plastic strap provided Fig.4.The plates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it. See diagrams below.
3. Assembly complete.
unit
unit
unit unit
unit

4. If the unit is not level on your floor use the wedges provided, and snap them off so that they do no
protrude out from the cabinet’s legs , you can also snap them lengthways if desired.

Care and maintenence
Wood Furniture
Wood displays diffe ent g ain patte ns depending on which way it is cut - fo example, the ‘medulla y ay’
which can appea on oak fu nitu e is a ma k of good quality timbe - these a e just cha acte istics of the
natu al beauty of the wood. Some fu nitu e is also delibe ately aged and ustic.
All timbe su faces will change colou and mellow ove time. New fu nitu e will initially va y in shade f om
items that have been p eviously pu chased.
How to care for your wood furniture
Fu nitu e with a ha d lacque , wax polish o painted su face should be dusted with a d y cloth.
When using the surface for serving food and drinks it is best to use protective ats and coasters.
Spillages should be wiped up as soon as possible.
Sp ay polishes a e best avoided as they contain silicones which may spoil the fu nitu e’s su face by building
up ove time. Use of cleaning aterials containing abrasive co pounds, acidic or caustic reagents and any
bleaches containing oxidising reagents should be avoided as prolonged use ay da age the lacquer
surface. Wipe up spills immediately. If sticky ma ks occu on the su face they can be emoved with a dilute
solution of wa m soapy wate . The offending area should be rubbed lightly and then co pletely dried
i ediately afterwards, before replacing any ats etc.
Ou fu nitu e will endu e most tempe atu es in the home but it is best to avoid placing fu nitu e next to
heat sou ces such as adiato s o fi es. Be pa ticula ly ca eful with solid wood as the lack of humidity caused
by cent al heating can cause damage such as wa ping.
Safety Instructions
Neve d ag fu nitu e when moving it, always lift it. Please take ca e when handling o moving the fu nitu e as
ca eless handling may cause damage o inju y. No liability will be accepted fo damage o inju y caused by
inco ectly installed fu nitu e.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerle s Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.co