Ercol LUGO 4082 User manual

4082 LUGO MEDIUM EXTENDING
DINING TABLE
Thank you for purchasing this Lugo medium extending dining table. Please ensure instructions are read in full before
attempting to assemble this product.
1
Ref: 2507 / 4082
This product is heavy, it should be assembled as near as possible to the point of use.Take care when lifting to avoid
personal injury and (or) damage to the product.
The fittings pack contains small items which should be KEPT AWAY FROMYOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
Installation should be carried out exactly according to the manufacturers instructions, otherwise a safety risk can
occur if incorrectly installed.

Please check the pack contents before attempting to assemble this product. A full checklist of components is given
in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
2
Ref: 2507 / 4082
Pre-assembly preparation
This is a two person operation
Parts checklist
11 x Top panel
22 x Leg
118mm x 900mm x 1700mm
65mm x 713mm x 855mm
Fitting checklist
B4 x headless bolt (M8 x 67)
C
4 x hex nut
4 x fixing head
D
E
1 x wrench
1 x allen key (M4)
F
Items you will need
A
8 x allen head bolt (M6 x 45 - Chrome)
1
2
2

2. Use 4x fixing heads (C) and 4x hex nuts (D) to attach the legs (2) to the top panel (1). Make sure placing the
fixing heads (C) first by aligning the hole on them with the hole where the headless bolts go through. Use the
wrench (F) to fix the hex nuts (D) tightly.
1. Fix 4x headless bolts (B) on the legs (2) as shown below.
Step by step assembly instructions
Ref: 2507 / 4082 3
2
B
B
2
C
C
C
D
D
C
C
D
F
D
D
2
1

3. Fix 8x allen head bolts (A) by using an allen key (E).
4. Lift the unit to standing position.
Ref: 2507 / 4082 4
A
A
A
A
E
A
A

Ref: 2507 / 4082 5
5. Release the two catch locks under the top panel and extend both halves.
6.Take out the extension leaf and place it between the two halves of the top panel.
7. Fix the top panels in place by using the catch locks.

Care and maintenance
Wood Furniture
Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’ which
can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty
of the wood. Some furniture is also deliberately aged and rustic.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.
How to care for your wood furniture
Furniture with hard lacquer, wax polish or painted surface should be dusted with a dry cloth.When using the
surface for serving food and drinks it is best to use protective mats and coasters. Spillages should be wiped up as
soon as possible.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up
over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any bleaches
containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface.Wipe up spills
immediately. If sticky marks occur on the surface they can be removed with a dilute solution of warm soapy water.
The offending area should be rubbed lightly and then completely dried immediately afterwards, before replacing
any mats etc.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping.
Safety Instructions
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as
careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by
incorrectly installed furniture.
PLEASE KEEP THESEINSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX ercol.com
YNG TAL 14 / ERLG006 D: 09.05.2019 / RN000
Ref: 2507 / 4082 6