Ercol Novoli 4350 User manual

Novoli 4350 small dining table
Thank you for purchasing this Novoli small dining table. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before assembling this product
Please check the pack contents before assembling this product. A full checklist of components is given in this leaflet.
If any components are missing, please contact the retailer from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 minutes to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
This item is HEAVY

M8 x 30mm bolt x 16
Fittings and parts checklist
1 allen key
2 M8 x 30mm bolt x 16
3 washer x16
Step by step instructions
Put the bolt through the holes in the table top to assemble the table

With the help of another person, carefully lift the table up and place on it’s legs, taking care not to pivot the table on
two legs as you do this.
Please lift the table off the ground to turn over.
DO NOT pivot on the legs to turn the table over.
✓
✗

One end of the dining table will have a small set of wheels located in the legs.
Please extend the table from this end as shown.
Unfold the extension leaf as shown.
Operating Instructions
unlocked table catch
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX ercol.com
locked table catch
Legs with wheels