Ercol Teramo 3661 User manual

ercol
Teramo 3661 medium extending dining table
Thank you for purchasing this Teramo Dining table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre- assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
This item is HEAVY
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 30 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.

Left legs
Right legs
x 1
x 2
x 2
x 1
8
8
x 8

1. Two people maybe necessary to carefully turn the table top face down onto a smooth
soft surface such as carpet. Put one leg to the table top and matching the holes, secure the bolts
and washers ( locking washer first) into the legs through the holes on the end rail of the table top.
When ALL bolts and washers are in place, finger tight. Repeat with the three other legs.
Step by step assembly instructions
ylluferacnosreprehtonafodiaehthtiW,yvaehyrevsielbatsihte take caresaelP,sgelehtinglbmessaretfA.2
lift the table and turn it over. taking care not to turn the table over on two legs as this may cause damage.
E x 8
F x 8
G x 8
H x 1

3. Grasp the corners of one side of the table top and pull out. Then take out the extension leaf on the table
the pins on the table top.then push it back together and
top.Do the reverse to close the table.
frame making sure the holes on the leaf align with
secure using the two metal clips underneath the table

Wood Furniture
Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. ome furniture is also deliberately aged and rustic.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
PLEA E KEEP THE E IN TRUCTION FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9P www.ercol.com
Care and Maintenance
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
When using the surface for serving food and drinks it is best to use protective mats and coasters. pillages
should be wiped up as soon as possible.
pray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building
up over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any
bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface.
Wipe up spills immediately. If sticky marks occur on the surface they can be removed with a dilute solution
of warm soapy water. The offending area should be rubbed lightly and then completely dried immediately
afterwards, before replacing any mats etc.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to
heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity
caused by central heating can cause damage such as warping.
Safety Instructions
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as
careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by
incorrectly installed furniture.