Ercol Capena 3571 User manual

ercol
Capena Medium Dining Table
Thank you for purchasing this Capena Dining table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre- assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
This item is HEAVY
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.

Table legs
Allen Key
x 1
x 4
x 1
1
2
Bolt x 8
Locking washer x 8
Flat washer x 8
A
B
C
D
Table top

1. Two people maybe necessary to carefully turn the table top face down onto a smooth
soft surface such as carpet. Put one leg to the table top and matching the holes, secure the bolts
and washers ( locking washer first) into the legs through the holes on the end rail of the table top.
When ALL bolts and washers are in place, finger tight. Repeat with the three other legs.
Step by step assembly instructions
ylluferacnosreprehtonafodiaehthtiW,yvaehyrevsielbatsihte take caresaelP,sgelehtinglbmessaretfA.2
lift the table and turn it over. taking care not to turn the table over on two legs as this may cause damage.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
3. Grasp the corners of one side of the table top and pull out. Then take out the extension leaf on the table
the pins on the table top.then push it back together and
top.Do the reverse to close the table.
Note the extension leaf can be stored FACE UPWARDS on the frame underneath the table.
frame making sure the holes on the leaf align with
secure using the two metal clips underneath the table