Ercol Romana 2640 User manual

2640 & 2641 small & medium romana extending tables
Thank you for purchasing this romana extending table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROMYOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
Necessary Tools
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
ercol

Fittings and parts checklist
A Bolts x 12
B Allen key x 1
Step by step assembly instructions
1. With the help of another person, lay
the table top face down on to a soft
surface such as carpet or a blanket
which is free from sharp objects.
2. Slot the two leg rails into the ends of
the table as shown below.
3. Using the Allen key provided screw
a bolt into the single hole first, then
screw a bolt into each of the two
pre drilled holes on the other side of
the leg, as shown below.

Please lift the table off the ground to turn over.
DO NOT pivot on the legs to turn the table over.
Please lift the table off the ground to turn over.
DO NOT pivot on the legs to turn the table over.
Please lift the table off the ground to turn over.
DO NOT pivot on the legs to turn the table over.
4. With the help of another person, carefully lift the table up and place on it’s legs, taking care not to pivot the table
on two legs as you do this.
Closed Open

5. The two leaves are held closed by
two keepers (above), one on either
side of the underside of the table
where the join is. Turn the bar on
them to release the leaves then, as
they are reciprocal, gently pull open
one leaf, as far as it will go and the
other will automatically open with it.
6. Lift the top flap of the butterfly
extension leaves and pull it up and back
over the table top as shown in the
following 3 stages. As you open it the
lower leaf will glide over the ramp and up
into place.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
7. Close all four keepers to secure the
leaves.