Ergotron Zido Side Bin User manual

1 of 3
300-5410-00 rev. B • 11/19
NOTE: The Zido cart is not included.
Product Part#
Zido Side Bin, Cool Grey ZSBCG
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
Zido™Side Bin
User's Guide

2 of 3
300-5410-00 rev. B • 11/19
02
03
04
01
Zido Side Bin Quantity
01 Side Bin Back 1
02 Side Bin Front 1
03 #10-9 x 3/4" Wood Screws 3
NOTE
An electric drill and 1/8" drill bit
are required for this assembly.
A 5/32" hex driver (provided with
your Zido cart) is required for this
assembly.
PARTS LIST
Before beginning assembly of your Zido Side Bin, please
review the parts list to verify that your shipment is com-
plete.

3 of 3
300-5410-00 rev. B • 11/19
1/2"
1/8" Drill Bit
Shelf Prole
Tape
CONGRATULATIONS! YOUR ZIDO SIDE BIN ASSEMBLY IS COMPLETE!
© 2016 Ergotron, Inc. All rights reserved.
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
STEP 1
Pre-drill the Zido Shelf
Select the installation location. Place the
Side Bin on the bottom of the shelf at the
right location so that the holes are against
the shelf. Using the Bin as a template, mark
the drill points on the bottom of the shelf.
Drill the screw holes using a 1/8”drill bit.
Because the shelf is 3/4”thick, only drill the
hole 1/2”deep. (Mark your drill bit with
masking tape to be sure you don’t drill too
far.)
STEP 2
Install the Bin
Align the top of the Bin with the holes on the Zido shelf. Secure using three 3/4”Wood Screws.
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For the latest User Installation Guide please visit: www.ergotron.com