
2/17
888-24-297-G-01 rev. D • 08/17
2/9
1
12
765
15
11
8
4
3
15
16
10
13
14
ENGLISH
Features & Specications
Worksurface
Secure storage for open laptop
Front Handle
Height Adjustment Brake Handle
USB Hub connects keyboard and mouse USB cables
Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder
Keyboard Light under Front Handle
Keyboard Light Switch
Cable Management and Storage for excess cables and power supplies
Storage Basket and Rear Handle
Front Locking Casters
Laptop Screen Holders
Quick Reference Card
Scanner Holder
Antimicrobial worksurface and antimicrobial coating on wrist rest
Auto-Lock Drawer (see page 3 for drawer congurations)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
FCC Compliance Statement
The cart has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
Changes or modications not expressly approved
by Ergotron, Inc. could void the user’s authority to
operate the equipment.
Please contact Ergotron for complete EMC compatibility
information.
-20 °C
- 4 °F
50 °C
122 °F
Relative
Humidity
Range
5-95% rH
10 °C
50 °F
29 °C
86 °F
Relative
Humidity
Range
5-95% rH
Operational Storage
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Failure to heed this warning may result in serious personal
injury or property damage!
www.ergotron.com
Minimize LiftTension BEFORE:
Removing Mounted Equipment, Shipping Cart, Storing Cart.
826-501
14mm (9/16”)
AVERTISSEMENT
DANGER D’IMPACT!
LES PARTIES EN MOUVEMENT PEUVENT ÉCRASER ET COUPER.
Il existe un risque de blessure corporelle ou d’endommagement
matériel en cas de non respect de cet avertissement.
Minimisez la tension d’élévation AVANT:
de retirer l’équipement xé, d’expédier le chariot, de stocker le chariot
IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all
equipment is properly installed on the product before attempting range of motion or tension adjustments.
Any time equipment is added or changed on this product resulting in a dierent mounted weight, you
should repeat the adjustment steps to ensure safe and optimum operation. This product should move
smoothly and easily through the full range of motion and stay where you set it. If movement is dicult
or the product does not stay where you set it, follow the adjustment instructions to loosen or tighten the
tension to create a smooth, easy motion. Depending on your product and the adjustment, it may take
many turns to notice a dierence.