Etac Molift Mover 300 L User manual

Molift Mover 300 L
EN - User manual
BM06201 Rev. B 2021-08-04

Table of contents������������������������������������������������������������������������������������������������������������������������������� 2
English manual���������������������������������������������������������������������������������������������������������������������������������� 4
Important ............................................................................................................................................4
Molift Mover 300 L ��������������������������������������������������������������������������������������������������������������������������� 5
About Molift Mover 300 L ...................................................................................................................5
General ��������������������������������������������������������������������������������������������������������������������������������������������� 6
Product identification...........................................................................................................................6
Technical data ����������������������������������������������������������������������������������������������������������������������������������� 7
Assembly������������������������������������������������������������������������������������������������������������������������������������������� 8
Lifting column......................................................................................................................................8
Mounting sling bar ..............................................................................................................................8
Battery and hand control .....................................................................................................................8
Checklist after assembly.......................................................................................................................8
How to use Molift Mover 300 L��������������������������������������������������������������������������������������������������������� 9
Before use / daily check / monthly........................................................................................................9
Hand control........................................................................................................................................9
Safety devices ....................................................................................................................................10
Push handles......................................................................................................................................10
Brakes................................................................................................................................................10
Emergency stop / emergency lowering ...............................................................................................10
Electronics����������������������������������������������������������������������������������������������������������������������������������������11
Transport and operating conditions....................................................................................................11
Battery...............................................................................................................................................11
Battery and service indicator ..............................................................................................................11
Service scope .....................................................................................................................................11
Table of contents
2
Molift Smart 300 L / www.etac.com

Charging ...........................................................................................................................................12
Transfer ��������������������������������������������������������������������������������������������������������������������������������������������13
Using slings........................................................................................................................................13
Lifting and lowering...........................................................................................................................13
Supporting arms (optional).................................................................................................................14
Transfer .............................................................................................................................................16
Lowering into sitting..........................................................................................................................16
Accessories���������������������������������������������������������������������������������������������������������������������������������������17
Sling bars and sling bars with scale ....................................................................................................17
Castor with directional lock................................................................................................................17
Stretcher............................................................................................................................................17
Slings.................................................................................................................................................17
Maintenance ������������������������������������������������������������������������������������������������������������������������������������18
Cleaning and disinfection...................................................................................................................18
Reconditioning...................................................................................................................................18
Recycling ...........................................................................................................................................18
Spare Parts.........................................................................................................................................18
Periodic inspection ���������������������������������������������������������������������������������������������������������������������������18
Periodic inspection scope ...................................................................................................................18
Troubleshooting �������������������������������������������������������������������������������������������������������������������������������19
Symptom...........................................................................................................................................19
Possible cause / action........................................................................................................................19
3
Molift Smart 300 L / www.etac.com

Important
This user manual contains important safety
instructions and information regarding the use of
the lifter and accessories.
In this manual the user is the person being lifted.
The carer is the person operating the lifter.
Warning!
This symbol indicates important
information related to safety.
Follow these instructions carefully
Read user manual before use!
It is important to fully understand
the content of the user manual
before attempting to use the
equipment
Visit www.etac.com to download documentation
to ensure you have the latest version.
English manual
4
Molift Smart 300 L / www.etac.com

Molift Mover 300 L
Molift Mover 300 L is a mobile lifter intended for
lifting and transferring a person from/to bed, floor,
chair, wheelchair or toilet with a sling. The lifter
is made of light-weight materials, has castors and
electric actuator and is powered by a battery. It
has electrically adjustable legs and a lifting capac-
ity of 300 kg (661 lbs).
It is ideal for institutional care settings but can also
be used in privates homes and nursing homes. The
lifter should only be used for transfers across short
distances, such as between a chair and a bed or
into bathroom / rest room, and is not a replace-
ment for wheelchair or similar.
About Molift Mover 300 L
Lifter components:
Identification of those parts into which the lifter
can be disassembled
Lifting arm
Push
handles
Motor /
actuator
Emergency
stop
Legs
Electric
emergency
lowering
Chassis
Sling bar
Battery
Lifting
column
Manual
emergency
lowering
Hand
control
Wheel / castor
(rear with break)
5
Molift Smart 300 L / www.etac.com

Product identification
General
CE declaration
The product, and its related accessories, described in this instruction for use (IFU), is in
compliance with the regulation (EU) 2017/745 of 5. April 2017 – as a medical device, risk
class I.
The product is manufactured and tested according to standards IEC 60601-1, IEC 60601-
1-2 and EN/ISO 10535:2006.
Any serious incident that occurs in relation to the device should be reported to the
manufacturer and the competent authority of the Member State in which the user and/or
patient is established.
Conditions for use
Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use
the equipment and accessories covered by this user manual.
Modifications and use of components made by other manufacturers�
We recommend only using Molift components and spare parts. Declaration of conformity is not valid
and Etac is not responsible for warranty if any modifications are made to the product. Etac shall not be
liable for faults or accidents that can occur when using components made by other manufacturers.
Only certified personnel are allowed to open lifter or accessories to perform service
or repair. Risk of injury from rotating parts and electric shock.
The lifter is not intended to be operated by the person being lifted.
Warranty
Two-year warranty against defects in workmanship and materials of our products.
One-year warranty for batteries. Please refer to www.etac.com for terms and conditions.
Product label
The product labels barcode contain article number,
serial number and production date.
Warning labels and symbols
Symbols used on the product, explained in more
detail:
Mover 300 L
Gross weight 340kg / 750lbs
SWL 300kg / 661lbs
26.4V DC, IP24
Duty cycle 10%
Type BF applied part Battery indicator
CE marked Manufacturer
Refer to user manual
YYYY-MM-DD
Date of manufacture
Indoor use only Catalogue number
Do not dispose in
general waste Serial number
Emergency lowering Medical Device
Service indicator
6
Molift Smart 300 L / www.etac.com

Safe Working Load (SWL):
300 kg (661 lbs)
Weight of unit:
Excl. battery and sling bar:
36 kg/79,3 lbs
Chassis: 19 kg/41,8 lbs
Lifting column: 17 kg/37,4 lbs
Battery: 1,6 kg/3,7 lbs
4-point medium sling bar: 2,5 kg/7,3 lbs
Battery:
Art: 1341000
26.4 V NiMH 2.6 Ah
Battery charger:
100-240 V AC, 50-60 Hz
0,9 A output
Lifting speed:
32,6mm/second (1,28 inches/second)
with 75kg (165,35 lbs) load
Protection class:
Hand control IP24
Lift motor IP24
Maximum A-weighted sound power level:
LWA = 63,2 dB
Operating forces button:
Buttons on handset: 3.4 N
Material:
Steel, aluminum, plastic
Motor:
Lifting motor/actuator: 24 V DC
Leg spreading motor: 12 V DC
Turning diameter:
1400 mm (55.1 inches)
Number of lifts with fully charged battery:
50 lifts ( 75 kg / 165 lbs, 50 cm / 20 inches)
Expected lifetime:
The lifter has an expected lifetime of 30 000
cycles or 10 years.
Technical data
2090 mm (82/in)
1285 mm (50/in)
105 mm
(4/in)
1385 mm (54/in)
460 mm
(18/in)
275 mm
(10/in)
1055 mm
(41/in)
1765 mm
(69/in)
393 mm
(15/in)
1250 mm (49/in)
550 mm (21/in)
690 mm (27/in)
1065 mm (41/in)
1205 mm (47/in)
33 mm (1/in)
105 mm (4/in)
w=700
M
K
2060 mm (
81/in
)
1420 mm (55/in)640 mm (25/in)
620 mm (24/in)
CSP
1
2
3
2060 mm (81/in)
1330 mm (52/in)
640 mm (25/in)
1 Highest position:
2 Max reach:
3
Lowest position:
(Central Suspension Point)
7
Molift Smart 300 L / www.etac.com

Assembly
Charge the battery. The battery must not be in
the battery holder during assembly!
Lifting column
Place lifting column in chassis. Make sure that
the red arrow on the lower part of the column
corresponds with the edge of chassis.
Make sure screw on column is inside the hole
on chassis. This will prevent the column from
unintentionally being lifted out of chassis when
lock handle is pushed down.
Fix the column by pushing the lock handle on the
back all the way down.
Mounting sling bar
Turn connection point on lifting arm in top
position.
Insert bolt on sling bar in connection point to
mount sling bar. When bolt is completely inside
the sling bar is mounted and can rotate freely.
Battery and hand control
1.
1 32
Connect hand control to bottom of battery
holder.
2. Insert battery.
3. Connect hand control wire to push handle so
it does not fall to the floor when dropped.
Checklist after assembly
Do not start using lifter before
completing control according to
checklist after assembly.
Use this checklist to verify that the lifter is properly
installed and can operate correctly and safely
before use.
Ensure that the lifting arm, lifting column and
sling bar are properly fixed and that there are
no loose parts on the lifter.
Make sure battery is charged (no lights on the
battery lamps).
Check that the lifter has no apparent damage
or other faults.
Perform one lift with load (60-80 kg)
8
Molift Smart 300 L / www.etac.com

How to use Molift Mover 300 L
The hand control has 4 buttons for lifting and
lowering of lifting arm and leg spread mechanism
in and out.
The Hand control has an indicator
light that will illuminate when battery level is
low and the lifter requires charging
Hand control 4 buttons
Art. no. 2018004
Lifting arm - Up / Down
NB! The lifter is most unstable in top position.
Legs - In / Out
NB! Spreaded legs provides increased stability and
better access to chair or toilet.
Hand control
General safety precautions
Only use accessories and slings that are adjusted
to fit the user, type of disability, size, weight and
type of transfer.
Working pause ratio/Duty Cycle�
Molift Mover 300 L should not be run constantly
for more than 2 minutes (with maximum load),
and rest for minimum 18 minutes. Duty Cycle
10%. (Intermittence according to standard ISO-EN
10535)
Safe Working Load
The lifter is marked with Safe Working Load (SWL)
The lowest SWL shall always be used
if safe working load (SWL) differs
between lifter, sling bar and body
support unit.
Molift lifters shall only be used to lift
persons. Never use the lifter to lift or
move objects of any kind.
Inspection to be performed daily or before use:
Make sure lifter has no visible damage, defects
or deformations
Make sure sling bar connection and all detach-
able parts are properly connected and secured
Make sure battery indicator is not illuminated
and service light is green
Make sure sling strap does not have visible
damage or frays.
Make sure wheels are rolling freely and lifter is
easy to maneuver
Inspection to be performed monthly:
Test run lifters operation functions and make
sure lifter does not make any abnormal
sounds
Test emergency stop button and emergency
lowering
If there are any faults or defects, the lift needs to
be taken out of operation and marked ”out of
order”
Before use / daily check / monthly
9
Molift Smart 300 L / www.etac.com

Safety devices
Molift Mover 300 L is equipped with several safety
devices, which are intended to prevent damage or
injuries to personnel and equipment in the case of
incorrect use.
The lifter has an overload sensor preventing the
lifter to be operated if the load exceeds SWL.
The lifting arm is hinged to prevent the arm
and sling bar from squeezing the user. The
actuator will not produce any force when moving
downwards.
The electronics are disabled if overheated. Wait
until the lifter has cooled down before using it
again.
Push handles
Use the push handles to move the lifter.
Do not push or pull the user,
lifting arm or actuator.
This may cause stability prob-
lems and lifter may tip over.
The lifter shall only be used for movement
over short distances. It is not a replacement
for wheelchair or similar.
Brakes
Rear wheels/castors are equipped with brakes.
Step on lever to lock brakes. Flip up to unlock.
Emergency stop / emergency lowering
Emergency stop
The emergency stop shuts off the power when
pushed in. Turn clockwise to reset (OK to operate
when the green ring is visible).
Electrical emergency lowering
Push and hold button for electrical emergency
lowering to lower lifting arm. The electrical emer-
gency lowering function does not work when the
emergency stop is activated.
Manual emergency lowering
Turn the top of the actuator clockwise and the
lifting arm moves downwards if under load.
The manual emergency lowering function on the
actuator should only be used when the electrical
emergency lowering does not work.
Emergency
stop
Electrical
emergency
lowering
Manual
emergency
lowering
10
Molift Smart 300 L / www.etac.com