Etac Ono Instructions for use

6
1
3
4
5
2
1 (2)
Check brake functionality
1.
Folding mechanism
2.
Frame
5.
Seat
3.
Handle
4.
Washing
74268E 12-02-15
Ono
Etac Ono can be reconditioned.
This reconditioning instruction is meant for the technician in charge of the reconditioning.
Reconditioning instruction/Re-use
- Use an eco-friendly washing-up liquid, car shampoo or
degreaser.
- For stubborn dirt, a solvent-free detergent with a pH of
5-9 can be used.
- Max. washing temperature of 80° C.
- Rinse and dry.
- The walker can be machine washed.
- Do not rinse with water directly on bearings and handles
using a pressure washer.
- Service brake and parking brake
- The wheels must be locked in both positions.
- The parking brake must be kept in the locked position.
- Lubricate the mechanism using a lubricant designed for
plastic.
- It must be easy to fold the walker. - Check that it locks in the unfolded position.
- Check that the walker feels stable. - Check that there is no weakening damage.
- Check that the seat is fixed in place and is not damaged.
- Check that the handle is not damaged and is fitted securely.

Sharp edge
2 (2)
≥ Ø9,4 mm
≤ 1 mm
Etac
Box 203, 334 24 Anderstorp
Sweden
Tel [phone]
Fax [phone]
www.etac.com
Wheels/Wheel axles
6.
A
B
- Check that the tyres, bearings and wheel axles are not
worn, and that the wheels turn easily.
Careless installation may lead to the retaining ring being
pulled out of shape and not springing back to its original
shape.
Check that the retaining ring is properly fitted in the
groove. Always use a new retaining ring!
- Check that the front forks rotate easily.
- When changing wheels, check that the groove for the
retaining ring has a sharp edge (see diagram B), and that
there is no excessive wear where the wheel bearings turn
on the shaft. Minimum shaft
diameter is 9.4 mm.
Check the wheel attachment. The distance between
The ends of the retaining ring must not exceed 1 mm
(see diagram A) after installation on the wheel axle.