Euro Systems Salire Vision Installation guide

Operation and Maintenance
for manual operated Salire®Vision
blind system

Table of Contents
Chapter Description
Scope of Works
Materials schedule
Maintenance
Parts

Operation and maintenance manual
Scope of works
Manually operated vision blind system:
Operation & maintenance of a manual operated vision blind system
Materials schedule
Salire®Vision
1. Bracket
2. End cover bracket
3. Gear
4. End plug
5. Tube
6. Open cassette
7. Tube hem bar
8. End cap hem bar
9. Hem bar
10. Ball chain

Operation and maintenance manual
Maintenance
Roller system operation and maintenance guide
How to operate your vision blind system….
It is important to operate your blind(s) correctly to ensure unnecessary damage or violation of
the warranty terms.
Operation is simple and if you follow a few simple guidelines, your blind(s) should last well beyond
their warranty period.
Use the ball chain to pull the blind to desired position. The blind will remain here until the ball chain is
operated again.
Maintenance schedule
It is advisable to follow the maintenance schedule for the total functionality of the vision blind(s) as it
will ensure a better operation of your blind(s) and extend their lifetime.
Checking procedure
Clean all the openings between blinds
Check the brackets and screws of brackets
Check the blind for any dust or dirt. If needed clean the fabric according to maintenance manual
of the installed fabric.
One cycle is from up position to down position and back to up position
Guidelines for maintenance schedule
More than 45 cycles per day
every 2 Months
Up to 45 cycles per day
every 3 Months
Up to 30 cycles per day
every 4 Months
Up to 15 cycles per day
every 6 Months

Parts
MANUALLY OPERATED VISION BLIND SYSTEM
1. Bracket
2. End cover bracket
3. Gear
4. End plug
5. Tube
6. Open cassette
7. Tube hem bar
8. End cap hem bar
9. Hem bar
10. Ball chain