Euro Systems Serena 100 Installation guide

Operation and Maintenance
for motorized roller blind Serena® 100

Table of Contents
Chapter Description
Scope of Works
Materials schedule
Maintenance
Parts

Operation and maintenance manual
Scope of works
Electrically operated roller blinds:
Operation & maintenance of an electrically operated roller blind system–Serena 100
Materials schedule
1. Serena® 100
1. Mounting brackets
2. Bracket cover
3. Motor
4. End plug
5. Tube
6. Mounting spline
7. Hem bar
8. End cap hem bar
9. Optional fascia
10. Fascia support
11. Fabric
12. Shaft adapter
13. Crown wheel
14. Motor plate

2. Vestamatic motor
Key Features:
-Limit position via remote
-Direct connection to VRS Lux sensor for sun related movements
-Readjustment of limits via remote once programmed and installed
-Step wise mode for precise limits
-Parallel connection possible
-Intermediate position
-Motor available as standard and quite version
-Same technology available for shutters, awnings, zip-screens, venetian blinds, pleated blind,
roller blind

Operation and maintenance manual
Maintenance
Roller blind operation and maintenance guide
How to operate your Roller Blinds….
Motorized roller blind(s) are easy to operate, just press a button on the remote or wall switch.T he blind
will go to the desired potion.
If a power failure occurs, make sure to watch the blind when operating, as in some cases this can
cause the preprogrammed limit positions (top and bottom settings) to be erased from the motors
memory. The roller blind(s) will then move passed the preprogrammed stopping positions and may
cause damage to the fabric and possibly your window frames. It is advisable to not to operate roller
blinds in case of no power.
Always make sure that nothing is blocking the free movement of the blind and nothing is blocking the
lower end stop causing the bottom rail to become jammed or obstructed, before operating your roller
blind(s).
If the blind is getting jammed or obstructed press the stop button to avoid damage to the fabric
and/or window frame.
If the blind and/or fabric has become damaged, please refrain from using the blind and call you service
partner at Euro Systems.
Maintenance schedule
It is advisable to check at least once in a year the total functionality of the roller blind(s). It will ensure a
better operation of your blind(s) and extend their lifetime.
Checking procedure
Clean all the openings between blinds
Check the brackets and screws of brackets
Check the blind for any dust or dirt. If needed clean the fabric according to maintenance manual
of the installed fabric.
Check the electrical connections of the motors to be free from the dust and loose connections.

One cycle is opening/ closing of the roller blind one time.
Guidelines for maintenance schedule
More than 45 cycles per day
every 2 Months
Up to 45 cycles per day
every 3 Months
Up to 30 cycles per day
every 4 Months
Up to 15 cycles per day
every 6 Months
Parts
ELECTRICALLY OPERATED ROLLER BLINDS:
1. Mounting brackets
2. Bracket cover
3. Motor
4. End plug
5. Tube
6. Mounting spline
7. Hem bar
8. End cap hem bar
9. Optional fascia
10. Fascia support
11. Fabric
12. Shaft adapter
13. Crown wheel
14. Motor plate