Euro Systems Serena Vertical blind Installation guide

Operation and Maintenance
for motorized operated vertical blind system
(Serena® Vertical blind)

Table of Contents
Chapter Description
Scope of Works
Materials schedule
Maintenance
Parts

Operation and maintenance manual
Scope of works
Motorized vertical blind system:
Operation and maintenance of a motorized Vertical blind system
Materials schedule
Serena® Vertical Blind

Operation and maintenance manual
Maintenance
Vertical system operation and maintenance guide
How to operate your vertical blind system….
Motorized vertical blind(s) are easy to operate, just press a button on the remote or wall switch. The
blind will go to the desired potion.
If a power failure occurs, make sure to watch the blind when operating, as in some cases this can
cause the preprogrammed limit positions (top and bottom settings) to be erased from the motors
memory. The roller blind(s) will then move passed the preprogrammed stopping positions and may
cause damage to the fabric and possibly your window frames. It is advisable to not to operate vertical
blinds in case of no power.
Always make sure that nothing is blocking the free movement of the blind and nothing is blocking the
last end stop causing the carrier rail to become jammed or obstructed, before operating your vertical
blind(s).
If the fabric is getting jammed or obstructed in head rail press the stop button to avoid damage to the
fabric
and/or window frame.
If the blind and/or fabric has become damaged, please refrain from using the blind and call you service
partner at Euro Systems.
Maintenance schedule
It is advisable to check at least once in a year the total functionality of the vertical blind(s). It will ensure
a better operation of your blind(s) and extend their lifetime.
Checking procedure
−Clean all the openings between blinds
−Check the brackets and screws of brackets
−Check the blind for any dust or dirt. If needed clean the fabric according to maintenance manual
of the installed fabric.
−Check the electrical connections of the motors to be free from the dust and loose connections.

One cycle is opening/ closing of the roller blind one time.
Guidelines for maintenance schedule
More than 45 cycles per day
every 2 Months
Up to 45 cycles per day
every 3 Months
Up to 30 cycles per day
every 4 Months
Up to 15 cycles per day
every 6 Months
Parts
MOTORIZED OPERATED FOLDING SKYLIGHT SYSTEM
1. Vertical blind Motor
2. Head rail
3. Fabric –127 mm slat size
4. Fabric –Bead chain