EUROM Safe-T-Convect User manual












Model: Safe-t-Convect
Date: /09/2021
Version: v0.1
Safe-t-Convect
User Manual

2
Dit product is alleen geschikt voor goed geïsoleerde ruimten en incidenteel gebruik.
This product is only suitable for well insulated spaces of occasional use.
Dieses Produkt ist nur für gut isolierte Räume mit gelegentlichem Gebrauch geeignet.
Ce produit ne convient que pour des espaces bien isolés à usage occasionnel.
Denna produkt är endast lämplig för välisolerade område för tillfälligt bruk.
Dette produkt er kun egnet til lejlighedsvis brug i velisolerede omgivelser.
Tento výrobek je vhodný pouze k použití v dobře izolovaných prostorách, které jsou využívány
příležitostně.
Tento výrobok je vhodný len do dobre izolovaných priestorov na príležitostné použitie.
Acest produs este potrivit numai pentru spații bine izolate, de uz ocazional.
Model:
Product code:
Safe-t-convect 2400
360479
Safe-t-convect 2001 (Swiss plug)
360486
Safe-t-convect 2400 Full white
360493

3
Informatie eisen voor elektrische toestellen voor lokale ruimteverwarming
Model: Safe-t-Convect 2400
Item
Symbool
Waarde
Eenheid
Item
Eenheid
Warmteafgifte
Type warmte-input, uitsluitend voor elektrische
warmte opslagtoestellen (selecteer één)
Nominale
warmteafgifte
Pnom
2,4
kW
Handmatige sturing van de warmteopslag
met geïntegreerde thermostaat
Neen
Minimale
warmteafgifte
(indicatief
Pmin
1,0
kW
Handmatige sturing van de warmteopslag
met kamer- en/of buitentemperatuur
feedback
Neen
Maximale continue
warmteafgifte
Pmax,c
2,4
kW
Elektrische sturing van de warmteopslag
met kamer- en/of buitentemperatuur
feedback
Neen
Aanvullend elektriciteitsverbruik
Door een ventilator bijgestane
warmteafgifte
Neen
Bij nominale
warmteafgifte
elmax
0
kW
Type warmteafgifte/sturing kamertemperatuur
(selecteer één)
Bij minimale
warmteafgifte
elmin
0
kW
Eentrapswarmteafgifte, geen sturing van de
kamertemperatuur
Neen
In stand-by modus
elSB
0
kW
Twee of meer handmatig in te stellen
trappen, geen sturing van de
kamertemperatuur
Neen
Mechanische sturing van de
kamertemperatuur door thermostaat
Neen
Elektronische sturing van de
kamertemperatuur
Neen
Elektronische sturing van de
kamertemperatuur plus dag-tijdschakelaar
Ja
Elektronische sturing van de
kamertemperatuur plus week-
tijdschakelaar
Neen
Andere sturingsopties (meerdere selecties mogelijk)
Sturing van de kamertemperatuur, met
aanwezigheidsdetectie
Neen
Sturing van de kamertemperatuur, met
openraamdetectie
Neen
Met de optie van afstandsbediening
Ja
Met adaptieve sturing van de start
Neen
Met beperking van de werkingstijd
Neen
Met black-bultsensor
Neen
Contactgegevens
Eurom - Kokosstraat 20 - 8281JC - Genemuiden - The Netherlands

4
Informatie eisen voor elektrische toestellen voor lokale ruimteverwarming
Model: Safe-t-Convect 2001
Item
Symbool
Waarde
Eenheid
Item
Eenheid
Warmteafgifte
Type warmte-input, uitsluitend voor elektrische
warmte opslagtoestellen (selecteer één)
Nominale
warmteafgifte
Pnom
2,0
kW
Handmatige sturing van de warmteopslag
met geïntegreerde thermostaat
Neen
Minimale
warmteafgifte
(indicatief
Pmin
0,7
kW
Handmatige sturing van de warmteopslag
met kamer- en/of buitentemperatuur
feedback
Neen
Maximale continue
warmteafgifte
Pmax,c
2,0
kW
Elektrische sturing van de warmteopslag
met kamer- en/of buitentemperatuur
feedback
Neen
Aanvullend elektriciteitsverbruik
Door een ventilator bijgestane
warmteafgifte
Neen
Bij nominale
warmteafgifte
elmax
0
kW
Type warmteafgifte/sturing kamertemperatuur
(selecteer één)
Bij minimale
warmteafgifte
elmin
0
kW
Eentrapswarmteafgifte, geen sturing van de
kamertemperatuur
Neen
In stand-by modus
elSB
0
kW
Twee of meer handmatig in te stellen
trappen, geen sturing van de
kamertemperatuur
Neen
Mechanische sturing van de
kamertemperatuur door thermostaat
Neen
Elektronische sturing van de
kamertemperatuur
Neen
Elektronische sturing van de
kamertemperatuur plus dag-tijdschakelaar
Ja
Elektronische sturing van de
kamertemperatuur plus week-
tijdschakelaar
Neen
Andere sturingsopties (meerdere selecties mogelijk)
Sturing van de kamertemperatuur, met
aanwezigheidsdetectie
Neen
Sturing van de kamertemperatuur, met
openraamdetectie
Neen
Met de optie van afstandsbediening
Ja
Met adaptieve sturing van de start
Neen
Met beperking van de werkingstijd
Neen
Met black-bultsensor
Neen
Contactgegevens
Eurom - Kokosstraat 20 - 8281JC - Genemuiden - The Netherlands

5
Thank you for choosing this EUROM device. You have purchased a quality device that you will
enjoy for many years. Using this device with respect and care will reduce the risk of personal
injury or material damage.
CAUTION
It is important to read and understand this instruction manual before
assembling, installing and using the device.
Introduction
This manual describes the correct and safe use of this device. Keep this manual for future
reference. The manual is an essential part of the device and must be given to the new owner
upon resale or exchange. This manual has been compiled with the utmost care. Nevertheless,
we reserve the right to improve and adjust this manual at any time. The images used may
differ.
The following symbols and terms are used in this manual to alert the reader on safety issues
and important information:
WARNING
Indicates a hazardous situation which, if the safety instructions are not
followed, can lead to injuries to the operator or bystanders, light and/or
moderate damage to the product or to the environment.
CAUTION
Indicates a hazardous situation which, if the safety instructions are not
followed, can lead to light and/or moderate damage to the product or to the
environment.
Warranty
EUROM offers a 36-month warranty on this device from the date of purchase. The warranty
does not cover wear and tear from normal use. The warranty expires if a defect is the result
of unintentional or careless use of the device. The manufacturer, importer and supplier are
not liable for incorrect connections.
Identification
Figure 1

6
Figure 2
Figure 3
Specifications
Type:
Safe-t-Convect 2400/
Safe-t-Convect 2400 Full white
Safe-t-Convect 2001 Swiss plug
Product size:
68 x 20 x 42 cm
68 x 20 x 42 cm
Weight:
3.83 kg
3.83 kg
Voltage:
220-240 V / 50-60 Hz
220-240 V / 50-60 Hz
Power (L/M/H):
1000 / 1400 / 2400 W
750 / 1250 / 2000 W
Minimum space area:
24 m3
20 m3
Protective class:
Class I
Class I
Description
The Safe-t-Convect is an easy-to-use electric heater for indoor use, see (Figure 4).

7
Figure 4
1. Remote control
2. Control panel and LED display
3. ON/OFF switch
4. Power plug
5. Air inlet safety grill
6. Pedestals
7. Heat outlet safety grill
Control panel
1. ON/OFF button
2. LED display
3. Ventilator button
4. Timer button
5. Minus button
6. Remote control receiver
7. Plus button
8. Mode button
Figure 5

8
LED display
The LED display will go dark if no adjustments are
made for 3 minutes. The LED display will light up
again when you press a button.
Status indication (Figure 6, pos. 1):
•The 3 suns indicate whether the heater is set
to low, medium or high capacity.
•The ventilator symbol indicates if the turbo
ventilator is enabled.
•The “P”indicates that the program function is
active.
•The “M” indicates that the manual function is
active.
Figure 6
Temperature indication (Figure 6, pos. 2):
•SET indicates that the required temperature is shown on the display.
•ON indicates that the heater is switched on.
•OFF indicates that the heater has been switched off by the ON/OFF button.
•Temperature shown in degree Celsius.
Time indication (Figure 6, pos. 3):
•Time shown in 24-hours format.
•The timer symbol indicates when a timer is set.
Remote control*
1. ON/OFF button
2. Max button
3. ECO button
4. Frost button
5. Minus button
6. Timer button
7. Plus button
8. Graph button
9. Ventilator button
10. Mode button
*Batteries not included
Figure 7
Safety
Please read and understand these safety instructions. Incorrect use can cause injury and will
void EUROM’s warranty.

9
This device is not suitable for use by persons with a physical, sensory or mental disability, or
lack of experience and knowledge (including children). Keep the device out of reach of
children, unqualified persons and pets. Never leave the device unattended while it is in
operation.
The device is equipped with an overheating protection, which switches it off automatically in
case of internal overheating. Switch the device off, unplug the power plug, remove the source
of overheating, let it cool down and use as normal. Do not use the device if the source of
overheating cannot be traced or if the problem persists, but always contact your supplier.
The device is fitted with a tipping safeguard, which ensures it automatically shuts off if it tips
over. When the device is returned to its upright position, it will resume functioning normally.
Before reusing the device, switch it off, unplug it and check it for damage. Do not use the
device if it is damaged or malfunctioning, but always contact your supplier.
General safety instructions
WARNING
•Prevent splashing water on or in the device.
•Do not immerse any part of the device in water or other liquids.
•Never insert fingers or other objects into the openings of the device.
•Do not expose the device to strong vibrations or mechanical stress.
WARNING
The device becomes very hot during use. Do not touch the device during use
or within five minutes after use.
CAUTION
Do not cover the device during usage or after use while the device is still hot.
To reduce the risk of fire, keep textiles, curtains, tent canvasses and other
flammable material at a minimum distance of 1 meter from the device.

10
Safety during operation
WARNING
Do not use the device:
•outdoors or in a small space;
•without installed pedestals;
•if any parts are dirty or wet;
•near large objects, like behind a door, under a shelf or cupboard;
•near or in a humid environment, like a bathroom or laundry room;
•near a water source, like a bath, shower, swimming pool or open window;
•near or in a dusty and dirty environment, like a construction site;
•near flammable materials, liquids or fumes, like a shed, stable or green
house;
•near other heat sources and open fire;
•immediately below a socket outlet;
•with an appliance that automatically switches the device on, such as a
timer, dimmer or any other device.
If the device, the electric cable or plug shows damage or is malfunctioning,
immediately take the appliance out of use and disconnect the power supply.
Transport and storage
•Clean the device before storing it.
•Transport the device upright.
•Store the device upright in its original packaging in a cool, dry and dust-free area.
Assembly
WARNING
Never place the device on surfaces such as beds or deep-pile carpet as
openings could be blocked.
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the heater if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.

11
Mounting on pedestals
1. Lay the device down on a steady soft surface
(Figure 8, pos. 4).
2. Place the pedestals (Figure 8, pos. 3) on both
sides of the main body (Figure 8, pos. 5).
3. Screw and tighten the pedestals with the
small screws (Figure 8, pos. 1) using a Phillips
screwdriver (Figure 8, pos. 2).
Figure 8
4. Place the device on a horizontal, solid and
non-flammable surface.
5. Place the device with a minimum clearance
distance (Figure 9) of:
•100 cm on the top side;
•50 cm on the sides;
•30 cm on the back side;
•50 cm on the front side.
6. Do not place the device immediately below a
socket outlet.
Figure 9
Installation
WARNING
Do not put the power plug into the wall socket before the device is correctly
mounted or stands in the right place.
Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 2400 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.

12
1. Make sure the device is correctly assembled.
2. Make sure the ON/OFF switch is in the OFF
position (Figure 10, pos. 1).
3. Place the power plug (Figure 10, pos. 2) into
an earthed wall socket that is easily
accessible. Use an earthed wall socket with a
minimum power of 2400 Watt.
Figure 10
Remote control
1. Remove the cover (Figure 11, pos. 1).
2. Remove the batteries (if present).
3. Insert two batteries (AAA 1.5 V) (Figure 11,
pos. 2) as indicated in the battery
compartment. Make sure to insert the
batteries correctly.
4. Replace the cover.
Figure 11
Operation
WARNING
Before every use, make sure that:
•you operate the device with dry hands;
•the device is clean and dry;
•the device is not damaged;
•the device is not covered or blocked;
•the device is securely installed.
CAUTION
When the device is turned on or off, it may emit a sound. This is material
expanding and shrinking during heating and cool-down.

13
1. Set the ON/OFF switch to the ON position
(Figure 12, pos. 1).
2. The display (Figure 12, pos. 2) will show OFF.
3. Press the ON/OFF button. The device will
always start in P-mode, SET temperature 20
degree Celsius and High heating capacity.
Figure 12
Manual mode
1. Press the Mode button to choose the manual mode.
2. Set the capacity at which the heater will work using the plus and minus button on the
control panel or the heating button on the remote control. The 3 suns indicate whether
the heater is set to low, medium or high capacity.
Program mode
1. Press the Mode button to choose the program mode.
2. Set the desired temperature for the device using the plus and minus button on the
control panel or the remote control. The device automatically:
•turns the heating element off when the desired temperature is reached;
•turns the heating element back on when it cools down.
3. Set the capacity at which the heater will work using the plus and minus button on the
control panel or the max button on the remote control. The 3 suns indicate whether the
heater is set to low, medium or high capacity.
Timer setting
1. Press the Timer button on the control panel or the remote control to activate the timer,
the timer indication will appear on the display.
2. Use the plus and minus button to set the count-down timer between 1 hour and 24
hours, the timer symbol will appear on the display.
3. The display shows the time in descending order when the device will switch off
automatically.
ECO mode
The remote control has an ECO button for an energy-efficient mode; the device maintains the
room temperature at 16°C.
1. Press the ECO button to activate.
2. Press the ECO button to deactivate.
With the Max button on the remote control the capacity at which the ECO mode will work
can be chosen: low, medium or high capacity. Please note that the heating capacity in ECO

14
mode is different than heating capacity in normal mode. Both heating capacities need to be
set separately.
Frost mode
The remote control has a Frost button for a frost protection mode; the device maintains the
room temperature between 5°C and 8°C.
1. Press the Frost button to activate.
2. Press the Frost button to deactivate.
With the Max button on the remote control the capacity at which the Frost mode will work
can be chosen: low, medium or high capacity. Please note that the heating capacity in Frost
mode is different than heating capacity in normal mode. Both heating capacities need to be
set separately.
Remote control slot
1. The remote control (Figure 13, pos. 2) can be
placed in the remote control slot (Figure 13,
pos. 1) on the side of the device.
Figure 13
After operation
CAUTION
Do not use the power cable to unplug or carry the device. Do not wind the
power cable too tightly or in sharp corners. Do not wrap the power cable
around the device.
1. Make sure the ON/OFF switch is in the OFF position (Figure 10, pos. 1).
2. Disconnect the power plug from the power outlet (Figure 10).
3. Let the device cool down before touching it.
4. Wind the power cable.
5. Remove the batteries from the remote control (Figure 11).
Maintenance
WARNING
Do not perform any repairs or modifications to this device.

15
Maintenance and repairs must be carried out by a EUROM authorized professional. If the
electric cable and/or electric plug is damaged, it should be replaced by the manufacturer or
its service employee or persons with similar qualifications to prevent risks.
Cleaning
WARNING
The device becomes very hot. Make sure the device is turned off, unplugged
and completely cooled down.
CAUTION
Do not use:
•scouring pads;
•hard brushes;
•flammable, aggressive or chemical cleaning products.
Prevent water from entering the device. Do not immerse any part of the device
in water or other liquids.
It is recommended to clean the device after each use and prior to storage.
1. Carefully vacuum the openings to remove dust and dirt.
2. Wipe the device with a damp, clean, soft, lint-free cloth or a soft brush.
3. Let the device dry completely prior to use and storage.
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver the
device to your supplier. Remove the batteries from the remote control for separate disposal.
Attachments
The CE declaration can be found at the end of this manual.

16
Information requirement for the electric local space heaters
Model identifier(s): Safe-t-Convect 2400
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space
heaters only (select one)
Nominal heat output
Pnom
2,4
kW
manual heat charge control, with
integrated thermostat
No
Minimum heat output
(indicative)
Pmin
1,0
kW
manual heat charge control with room
and/or outdoor temperature feedback
No
Maximum continuous
heat output
Pmax,c
2,4
kW
electronic heat charge control with room
and/or outdoor temperature feedback
No
Auxiliary electricity consumption
fan assisted heat output
No
At nominal heat output
elmax
0
kW
Type of heat output/room temperature control
(select one)
At minimum heat output
elmin
0
kW
single stage heat output and no room
temperature control
No
In standby mode
elSB
0
kW
Two or more manual stages, no room
temperature control
No
with mechanic thermostat room
temperature control
No
with electronic room temperature control
No
electronic room temperature control plus
day timer
Yes
electronic room temperature control plus
week timer
No
Other control options (multiple selections possible)
room temperature control, with presence
detection
No
room temperature control, with open
window detection
No
with distance control option
Yes
with adaptive start control
No
with working time limitation
No
with black bulb sensor
No
Contact details
Eurom - Kokosstraat 20 - 8281 JC - Genemuiden - The Netherlands

17
Information requirement for the electric local space heaters
Model identifier(s): Safe-t-Convect 2001
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space
heaters only (select one)
Nominal heat output
Pnom
2,0
kW
manual heat charge control, with
integrated thermostat
No
Minimum heat output
(indicative)
Pmin
0,7
kW
manual heat charge control with room
and/or outdoor temperature feedback
No
Maximum continuous
heat output
Pmax,c
2,0
kW
electronic heat charge control with room
and/or outdoor temperature feedback
No
Auxiliary electricity consumption
fan assisted heat output
No
At nominal heat output
elmax
0
kW
Type of heat output/room temperature control
(select one)
At minimum heat output
elmin
0
kW
single stage heat output and no room
temperature control
No
In standby mode
elSB
0
kW
Two or more manual stages, no room
temperature control
No
with mechanic thermostat room
temperature control
No
with electronic room temperature control
No
electronic room temperature control plus
day timer
Yes
electronic room temperature control plus
week timer
No
Other control options (multiple selections possible)
room temperature control, with presence
detection
No
room temperature control, with open
window detection
No
with distance control option
Yes
with adaptive start control
No
with working time limitation
No
with black bulb sensor
No
Contact details
Eurom - Kokosstraat 20 - 8281 JC - Genemuiden - The Netherlands

18
Erforderliche Angaben zu elektrischen Einzelraumheizgeräten
Modell: Safe-t-Convect 2400
Angabe
Symbol
Wert
Einheit
Angabe
Einheit
Wärmeleistung
Nur bei elektrischen Speicher-
Einzelraumheizgeräten: Art der Regelung der
Wärmezufuhr (bitte eine Möglichkeit auswählen)
Nennwärmeleistung
Pnom
2,4
kW
Manuelle Regelung der Wärme-zufuhr mit
integriertem Thermostat
Nein
Mindestwärme-leistung
(Richtwert)
Pmin
1,0
kW
Manuelle Regelung der Wärme-zufuhr mit
Rückmeldung der Raum- und/oder
Außertemperatur
Nein
Maximale kontinuierliche
Wärmeleistung
Pmax,c
2,4
kW
Elektronisch Regelung der Wärmezufuhr
mit Rückmeldung der Raum- und/oder
Außertemperatur
Nein
Hilfsstromverbrauch
Wärmeabgabe mit Gebläse-unterstützung
Nein
Bei Nennwärmeleistung
elmax
0
kW
Art der Wärmeleistung / Raumtemperaturkontrolle
(bitte eine Möglichkeit auswählen)
Bei Mindestwärme-
Leistung
elmin
0
kW
Einstufige Wärmeleistung, keine
Raumtemperaturkontrolle
Nein
Im Bereitschafts-zustand
elSB
0
kW
Zwei oder mehr manuell einstellbare
Stufen, keine Raum-Temperatur Kontrolle
Nein
Raumtemperaturkontrolle mit
mechanischem Thermostat
Nein
Mit Elektronische Raum-Temperatur
Kontrolle
Nein
Elektronische Raumtemperatur-kontrolle
und Tageszeitregelung
Ja
Elektronische Raumtemperatur-kontrolle
und Wochentags Regelung
Nein
Sonstige Regelungsoptionen (Mehrfach-nennungen
möglich)
Raumtemperaturkontrolle mit
Präsenzerkennung
Nein
Raumtemperaturkontrolle mit Erkennung
offener Fenster
Nein
Mit Fernbedienungsoption
Ja
Mit adaptiver Regelung des Heizbeginns
Nein
Mit Betriebzeitbegrenzung
Nein
Mit Schwarzkugelsensor
Nein
Kontaktangaben
Eurom - Kokosstraat 20 - 8281 JC - Genemuiden - The Netherlands

19
Erforderliche Angaben zu elektrischen Einzelraumheizgeräten
Modell: Safe-t-Convect 2001
Angabe
Symbol
Wert
Einheit
Angabe
Einheit
Wärmeleistung
Nur bei elektrischen Speicher-
Einzelraumheizgeräten: Art der Regelung der
Wärmezufuhr (bitte eine Möglichkeit auswählen)
Nennwärmeleistung
Pnom
2,0
kW
Manuelle Regelung der Wärme-zufuhr mit
integriertem Thermostat
Nein
Mindestwärme-leistung
(Richtwert)
Pmin
0,7
kW
Manuelle Regelung der Wärme-zufuhr mit
Rückmeldung der Raum- und/oder
Außertemperatur
Nein
Maximale kontinuierliche
Wärmeleistung
Pmax,c
2,0
kW
Elektronisch Regelung der Wärmezufuhr
mit Rückmeldung der Raum- und/oder
Außertemperatur
Nein
Hilfsstromverbrauch
Wärmeabgabe mit Gebläse-unterstützung
Nein
Bei Nennwärmeleistung
elmax
0
kW
Art der Wärmeleistung / Raumtemperaturkontrolle
(bitte eine Möglichkeit auswählen)
Bei Mindestwärme-
Leistung
elmin
0
kW
Einstufige Wärmeleistung, keine
Raumtemperaturkontrolle
Nein
Im Bereitschafts-zustand
elSB
0
kW
Zwei oder mehr manuell einstellbare
Stufen, keine Raum-Temperatur Kontrolle
Nein
Raumtemperaturkontrolle mit
mechanischem Thermostat
Nein
Mit Elektronische Raum-Temperatur
Kontrolle
Nein
Elektronische Raumtemperatur-kontrolle
und Tageszeitregelung
Ja
Elektronische Raumtemperatur-kontrolle
und Wochentags Regelung
Nein
Sonstige Regelungsoptionen (Mehrfach-nennungen
möglich)
Raumtemperaturkontrolle mit
Präsenzerkennung
Nein
Raumtemperaturkontrolle mit Erkennung
offener Fenster
Nein
Mit Fernbedienungsoption
Ja
Mit adaptiver Regelung des Heizbeginns
Nein
Mit Betriebzeitbegrenzung
Nein
Mit Schwarzkugelsensor
Nein
Kontaktangaben
Eurom - Kokosstraat 20 - 8281 JC - Genemuiden - The Netherlands

20
Exigences d'information applicables aux dispositifs de chauffage décentralisés électriques
Modèle: Safe-t-Convect 2400
Caractéristique
Symbole
Valeur
Unité
Caractéristique
Unité
Puissance thermique
Type d'apport de chaleur, pour les dispositifs de
chauffage décentralisés électriques à accumulation
uniquement (sélectionner un seul type
Puissance thermique
nominale
Pnom
2,4
kW
Contrôle thermique manuel de la charge
avec thermostat intégré
Non
Puissance thermique
minimale (indicative)
Pmin
1,0
kW
Contrôle thermique manuel de la charge
avec réception d'informations sur la
température de la pièce et/ou extérieure
Non
Puissance thermique
maximale continue
Pmax,c
2,4
kW
Contrôle thermique électronique de la
charge avec réception d'informations sur la
température de la pièce et/ou extérieure
Non
Consommation d'électricité auxiliaire
Puissance thermique réglable par
ventilateur
Non
Á la puissance thermique
nominale
elmax
0
kW
Type de contrôle de la puissance thermique/de la
température de la pièce (sélectionner un seul type)
Á la puissance thermique
minimale
elmin
0
kW
Contrôle de la puissance thermique à un
palier, pas de contrôle de la température de
la pièce
Non
En mode veille
elSB
0
kW
Contrôle à deux ou plusieurs paliers
manuels, pas de contrôle de la température
de la pièce
Non
Contrôle de la température de la pièce avec
thermostat mécanique
Non
Contrôle électronique de la température de
la pièce
Non
Contrôle électronique de la température et
programmateur journalier
Oui
Contrôle électronique de la température et
programmateur hebdomadaire
Non
Autres options de contrôle (sélectionner une ou
plusieurs options)
Contrôle de la température de la pièce,
avec détecteur de présence
Non
Contrôle de la température de la pièce,
avec détecteur de fenêtre ouverts
Non
Option contrôle à distance
Oui
Contrôle adaptatif de l'activation
Non
Limitation de la durée d'activation
Non
Capteur à globe noir
Non
Coordonnées de contact
Eurom - Kokosstraat 20 - 8281 JC - Genemuiden - The Netherlands