Everbloom Cornerstone R212421 User manual

You need at least 24” x 21” (61 x 54cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tool you may need is a
rubber mallet.
Small parts are included; we advise you to keep
them away from children and pets.
We also suggest having another person help you
assemble. Maximum Load capacity: approximately
5 cu. ft. of soil
Questions or Comments?
Email us at [email protected]
Everbloom-Garden.com
Cornerstone Raised Garden Bed
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for future reference. Find a suitable space to
assemble your new Cornerstone Raised Garden Bed.
Important Notes
Model# R212421
Dimensions 24" L x 21" W x 21" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Short Board
X 12
540mm
Parts List
2
Post Cap
X 4
+ 2pc
replacement
Left Corner
Post
X 2
Top
Bottom
Right Corner
Post
X 2
Top
Bottom

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Assembly
3
IMAGE 1
IMAGE 2
Start by making sure each corner post is oriented correctly. Reference Image 1. Slide one short board into
the corner posts from above.
Note: The boards need to be placed in the inward “U” shape of the brackets. (Image 2).
Left Corner
Post
Right
Corner
Post
Short
Board
Left Corner
Post
Left Corner
Post
Right Corner
Post
Right Corner
Post

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Assembly
4
IMAGE 3
Slide three short boards into the corner posts from above, as shown in Image 3.
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board
Short
Board
Short
Board
Short
Board

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Assembly
5
IMAGE 4
Slide the rest eight boards to form the second and third layers, as shown in Image 4.
Right
Corner
Post
Short
Board
X 8
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Assembly
6
IMAGE 5
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the
4 end caps, as shown in Image 5.
Note: Store the
additional caps for
future use.
Post Cap
X 1
Rubber
Mallet
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1

Cornerstone Raised Garden Bed - 24" L x 21" W x 21" H
Notes
IMAGE 6
X
X
Sometimes there might be a misalignment of the Corner Posts as shown in Image 6 and Image 7, which
may result in difficulty of sliding boards into the brackets. Please adjust them to the right position so that
they are parallel to each other, and perpendicular to the ground.
Assembling Problem 1
IMAGE 7
Assembling Problem 2
7

Bloom On.
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: ser[email protected]
Everbloom-Garden.com
US Patent Pending
Subscribe at www.everbloom-garden.com for
extra savings and upgrading information!