Everbloom RBS233 User manual

Single Raised Garden Bed
3’ L x 3’ W x 14" H
Installation Guide
Please Read the instructions carefully to familiarize yourself with every detail
and step involved. Keep this manual for future reference. Find a suitable
space to assemble the Everbloom Garden Bed.
You need at least 41” x 38.2” (104 x 97cm) for the finished product. A flat and
firm area (like a garage floor or flat yard space) is perfect! The only tool you
may need is a rubber mallet.
BEFORE YOU START
IMPORTANT NOTES
Small parts are included; we advise you to keep them away from children
and pets.
We also suggest having another person help you assemble.
Load capacity: approximately 11 cu. ft. of soil
RBS233

PARTS LIST
2H / 3’ x 3’ Single Raised Garden Bed
Post Cap
X 8
Long Board
X 8
960mm
Left Corner
Post
X 2
Top
Bottom
Right Corner
Post
X 2
Top
Bottom
Garden Bed
Liner
X 1

1ASSEMBLY
2H / 3’ x 3’ Single Raised Garden Bed
Start by making sure each corner post is oriented correctly. Reference image 1. Slide one long board into the
corner posts from above.
Note: The long boards need to be placed in the inward “U” shape of the brackets. (Image 2).
Left Corner
Post
Right
Corner
Post
Long
Board
Image 1
Image 2
Left Corner
Post
Left Corner
Post
Right Corner
Post
Right Corner
Post

2ASSEMBLY
2H / 3’ x 3’ Single Raised Garden Bed
Slide other three long boards into the corner posts from above, as shown in Image 3.
Image 3
Left
Corner
Post
Left
Corner
Post
Right Corner
Post
Right Corner
Post
Long
Board
Long
Board
Long
Board

3ASSEMBLY
2H / 3’ x 3’ Single Raised Garden Bed
Slide the rest four long boards to form the second layer, as shown in Image 4.
Image 4
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Long
Board
Long
Board
Long
Board
Long
Board