Everbloom E213612 User manual

You need at least 37” x 13” (94 x 33cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tool you may need is a
rubber mallet.
Small parts are included; we advise you to keep
them away from children and pets.
We alsosuggest having another person help you
assemble. Maximum Load Capacity: approximately
4 cu. ft. of soil
Questions or Comments?
Email us at [e-mail]
Everbloom-Garden.com
Deep Trough Planter Box
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for futurereference. Findasuitable space to
assemble your new Trough Planter Box.
Important Notes
Model# E213612 / E213612G
Dimensions 36" L x 12" W x 21" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!

Deep Trough Planter Box - 36" L x 12" W x 21" H
Parts List
2
Garden Bed
Liner
X 1
Post Cap
X 4
Right Corner
Post
X 2
Long
Board
X 4
Short
Board A
X 4
Bottom
Board
X 2
Left Corner
Post
X 2
Long Support
Board
X 2
Short
Board B
X 2
+ 2pc
replacement
Top
Bottom
Top
Bottom
900mm
240mm
420mm
900mm
240mm

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
3
IMAGE 1
IMAGE 2
Four depths are available by changing the sequence of the boards and position of the bottom
boards, as shown in below images. You can choose according to different needs first.
* For depth of 16.9” and 10” as shown in Image 1, please refer to steps from page 4.
* For depth of 14.4” and 7.5” as shown in Image 2, please refer to steps from page 10.
16.9”
(43cm)
14.4”
(36.7cm)
10”
(25cm)
7.5”
(19cm)
Long BoardLong Board
Long Board
Long Board
Long Support Board
Long Board
Long Board
Long Support Board
Long Support Board
Long Board
Long Board
Long Support Board
Bottom Board
Bottom Board
Bottom Board
Bottom Board
Depth 1 - 16.9” from page 4
Depth 4 - 14.4” from page 10
Depth 2 - 10” from page 4
Depth 5 - 7.3” from page 10

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
4
IMAGE3IMAGE4
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3. Slide one short board B
into the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4.
Left
Corner
Post
Right
Corner
Post
Short
Board B
For the deepest planting depth of 16.9”, please follow steps below.
For depth of 10”, the assembly methods are similar, just pay attention to the sequence of the
boards and position of the bottom boards, please refer to page 3.

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
5
IMAGE5
Short
Board B
Slide another short board B into the other two corner brackets from above, as shown in Image 5.
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board B

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
6
IMAGE6
With the help of another person holding the 2 assembled parts, slide the 2 long supporting boards into the
brackets from above. Make sure that one support board goes straight to the bottom, while the other one
stays in the middle of the way (don’t push it to the bottom), with the top edge between the 5th and 6th holes
of the post.
Long
Support
Board
Long
Support
Board
in the
middle of
the way
to the
bottom
5holes

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
7
IMAGE7
Put the bottom boards on lower slots of long support boards. Make sure the 2 ends of these bottom boards
go into the lower slots and rest in them with enough contact as shown in Image 7. Adjust the height of the
higher long support board slightly to hold these bottom boards ifnecessary.
Bottom
Board x 2
lower slot
Long
Support
Board
Long
Support
Board

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
8
IMAGE8
Push down the higher long support board to the bottom, as shown in Image 8.
Long
Support
Board
Long
Support
Board

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
9
IMAGE9
Slide the remaining boards into place, as shown in Image 9. Now you get an trough planter box with 16.9”
planting depth. Then, go to page 15, and follow the steps afterwards.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Short
Board A
X 4
Long
Board
X 4

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
10
IMAGE3aIMAGE4a
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3a. Slide one short board
Binto the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4a.
Left
Corner
Post
Right
Corner
Post
Short
Board B
For the planting depth of 14.4”, please follow steps below.
For depth of 7.5”, the assembly methods are similar, just pay attention tothesequence of the
boards and position of the bottom boards, please refer to page 3.

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
11
IMAGE5a
Slide another short board B into the other two corner brackets from above, as shown in Image 5a.
Short
Board B
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board B

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
12
IMAGE6a
With the help of another person holding the 2 assembled parts, slide the 2 long support boards into the brackets
from above to the bottom, as shown in Image 6a.
Long
Support
Board
Long
Support
Board

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
13
IMAGE7a
Put the bottom boards on the long support boards, as shown in Image 7a.
Long
Support
Board
Bottom
Board
X 2

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
14
IMAGE8a
Slide the remaining boards into place, as shown in Image 8a. Now you get an trough planter box with 14.4”
planting depth. Then, go to page 15, and follow the steps afterwards.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Short
Board A
X 4
Long
Board
X 4
Long
Support
Board

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
15
IMAGE10
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4
end caps, as shown in Image 10.
Rubber
Mallet
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1

Deep Trough Planter Box - 36" L x 12" W x 21" H
Assembly
16
IMAGE11
IMAGE12
Unfold the liner and cover the bottom of the Planter Box, as shown in Image 11 and Image 12.
Garden Bed
Liner

Deep Trough Planter Box - 36" L x 12" W x 21" H
Note
17
IMAGE13
X
X
Sometimes there might be a misalignment of the Corner Posts as shown in Image 13 and Image 14, which
may resultin difficulty of sliding boards into the brackets. Please adjust them to the right position so that they
are parallel to each other, and perpendicular to the ground.
Assembling Problem 1
IMAGE14
Assembling Problem 2

Bloom On.
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: [e-mail]
Everbloom-Garden.com
US Patent Pending
Subscribe at www.everbloom-garden.com for
extra savings and upgradinginformation!