Everbloom E211719 User manual

You need at least 18” x 20” (46 x 51cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tool you may need is a
rubber mallet.
Small parts are included; we advise you to keep
them away from children and pets.
We alsosuggest having another person help you
assemble. Maximum Load Capacity: approximately
4 cu. ft. of soil
Questions or Comments?
Email us at [e-mail]
Everbloom-Garden.com
Planter Box Cornerstone
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for futurereference. Findasuitable space to
assemble your new Planter Box.
Important Notes
Model# E211719 / E211719G
Dimensions 17" L x 19" W x 21" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!

Planter Box Cornerstone - 17" L x 19" W x 21" H
Parts List
2
Garden Bed
Liner
X 1
Post Cap
X 4
Right Corner
Post
X 2
Left Corner
Post
X 2
+ 2pc
replacement
Short
Board A
X 8
420mm
Bottom
Board
X 2
460mm
Short
Board B
X 4
420mm
Top
Bottom
Top
Bottom

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
3
IMAGE 1
IMAGE 2
Four depths are available by changing the sequence of the boards and position of the bottom
boards, as shown in below images. You can choose according to different needs first.
* For depth of 16.9” and 10” as shown in Image 1, please refer to steps from page 4.
* For depth of 14.4” and 7.5” as shown in Image 2, please refer to steps from page 10.
16.9”
(43cm)
14.4”
(36.7cm)
10”
(25cm)
7.5”
(19cm)
Long Board Long Board
Long Board
Long Board
Long Support Board
Long Board
Long Board
Long Support Board
Long Support Board
Long Board
Long Board
Long Support Board
Bottom Board
Bottom Board
Bottom Board
Bottom Board
Depth 1 - 16.9” from page 4
Depth 4 - 14.4” from page 10
Depth 2 - 10” from page 4
Depth 5 - 7.3” from page 10

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
4
IMAGE3IMAGE4
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3. Slide one short board B
into the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4.
Left
Corner
Post
Right
Corner
Post
Short
Board B
For the deepest planting depth of 16.9”, please follow steps below.
For depth of 10”, the assembly methods are similar, just pay attention to the sequence of the
boards and position of the bottom boards, please refer to page 3.

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
5
IMAGE5
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board B
Slide another short board B into the other two corner brackets from above, as shown in Image 5.
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
6
IMAGE6
With the help of another person holding the 2 assembled parts, slide another short boards Binto the brackets
from above. Make sure that one board goes straight to the bottom, while the other one stays in the middle of
the way (don’t push it to the bottom), with the top edge between the 5th and 6th holes of the post.
Short
Board B
Short
Board B
5holes
in the
middle of
the way
to the
bottom

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
7
IMAGE7
Put the bottom boards on lower slots of short boards B. Make sure the 2 ends of these bottom boards go
into the lower slots and rest in them with enough contact as shown in Image 7. Adjust the height of the
higher short board B slightly to hold these bottom boards ifnecessary.
lower slot
Short
Board B
Bottom
Board x 2

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
8
IMAGE8
Push down the higher short board B to the bottom, as shown in Image 8.
Short
Board B
Short
Board B

Elevated Planter Box - 17" L x 19" W x 28" H
Assembly
9
IMAGE9
Slide the remaining boards into place, as shown in Image 9. Now you get an planter box cornerstone with 10”
planting depth. Then, go to page 15, and follow the steps afterwards.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Short
Board A
x 8
Short
Board B
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
10
IMAGE3aIMAGE4a
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3a. Slide one short board
Binto the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4a.
Left
Corner
Post
Right
Corner
Post
Short
Board B
For the planting depth of 14.4”, please follow steps below.
For depth of 7.5”, the assembly methods are similar, just pay attention tothesequence of the
boards and position of the bottom boards, please refer to page 3.
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
11
IMAGE5a
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board B
Slide another short board B into the other two corner brackets from above, as shown in Image 5a.
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
12
IMAGE6a
With the help of another person holding the 2 assembled parts, slide another two short boards Binto the brackets
from above to the bottom, as shown in Image 6a.
Short
Board B
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
13
IMAGE7a
Put the bottom boards on the short boards B, as shown in Image 7a.
Bottom
Board
X 2
Short
Board B

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
14
IMAGE8a
Slide the remaining boards into place, as shown in Image 8a. Now you get a planter box cornerstone with
7.5” planting depth.
Note: If you want to add trellis kit onto this planter box, please assemble the extension connectors before
this step, to avoid disassembling the boards later.
Short
Board B
Short
Board A
x 8

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
15
IMAGE10
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4
end caps, as shown in Image 10.
Rubber
Mallet
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1

Planter Box Cornerstone - 17" L x 19" W x 21" H
Assembly
16
IMAGE11
IMAGE12
Unfold the liner and cover the bottom of the garden bed, as shown in Image 11 and Image 12.
Garden Bed
Liner

Planter Box Cornerstone - 17" L x 19" W x 21" H
Note
17
IMAGE13
X
X
Sometimes there might be a misalignment of the Corner Posts as shown in Image 13 and Image 14, which
may resultin difficulty of sliding boards into the brackets. Please adjust them to the right position so that they
are parallel to each other, and perpendicular to the ground.
Assembling Problem 1
IMAGE14
Assembling Problem 2

Bloom On.
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: [e-mail]
Everbloom-Garden.com
US Patent Pending
Subscribe at www.everbloom-garden.com for
extra savings and upgradinginformation!