Everbloom S333618W User manual

You need at least 37” x 19” (94 x 49 cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tools you may need are
a rubber mallet and a scissor.
Small parts are included; we advise you to keep
them away from children and pets.
We also suggest having another person help you
assemble. Maximum Load capacity: approximately
3.2 cu. ft. of soil
Questions or Comments?
Email us at [email protected]
Everbloom-Garden.com
Self-Watering Mobile Elevated Garden
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for future reference. Find a suitable space to
assemble your new Elevated Garden Bed.
Important Notes
Model# S333618W/B/G
*Model# S333618W: brown
*Model# S333618WB: blue
*Model# S333618WG: grey
Dimensions 36" L x 18" W x 36" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!
Copyright © 2022 Dynaforge Trading LLC.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
Parts List 1
2
Right Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long
Board
X 2
900mm
Short
Board A
X 2
380mm
Left Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long Support
Board
X 2
900mm
Short
Board B
X 2
380mm
Post Cap
X 4
Bolt
X 4
Nut
X 4
Nut Driver
X 1
Hex Key
X 1
Caster Wheel
X 4
+ 2pc
replacement

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
Parts List 2
3
Reservoir
Bottom Tray with
End Caps
X 3
Reservoir
Top Cover
X 3
Fill Tube
X 2
Water Level
Indicator
X 1
Water Level
Indicator Cap
X 1
Black Silicone
Connecting Tube
X 2
+ 1pc
replacement
+ 1pc
replacement
+ 1pc
replacement
+ 1pc
indicating tube
replacement
Fill Tube
Lid
X 1
Black
Tape
X 1

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
4
Reservoir
Position
Assembly
Depth 7.25”, 9.75”
IMAGE 1
Long Board
Long Support Board
Two depths are available by changing the position of reservoir, as shown in Image 1. You can
choose according to different needs first.
7.25”
(18.4cm)
9.75”
(24.7cm)

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
5
IMAGE 2 IMAGE 3
Start by making sure each corner post is oriented correctly, as shown in Image 2. Slide one short board A
into the corner brackets from above.
Note: The short boards need to be placed in the inward “U” shape of the brackets, as shown in Image 3.
For planting depths of 7.25”, please follow steps below.
For planting depths of 9.75”, the assembly method is similar, just pay attention to the position
of reservoir, please refer to page 4.
5 holes8 holes
Top
Bottom
Left
Corner
Post
Right
Corner
Post
Short
Board A

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
6
IMAGE 4
Short
Board A
Slide another short board A into the other two corner brackets from above, as shown in Image 4.
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right
Corner
Post
Short
Board A

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
7
IMAGE 5
With the help of another person holding the 2 assembled parts, slide the 2 long supporting boards into the
brackets from above. Make sure that one support board goes straight to the bottom, while the other one
stays in the middle of the way (don’t push to the bottom), with the top edge between the 1st and 2nd holes
of the post, as shown in Image 5.
Long
Support
Board
Long
Support
Board
to the
bottom
in the
middle of
the way

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
8
IMAGE 6
IMAGE 7
Take off the 4 end caps from reservoir bottom trays, as shown in Image 6. Flip over the bottom trays, and
connect them with black silicone connecting tube tightly, as shown in Image 7.
End Cap
End Cap End Cap
End Cap
take off
take off

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
9
IMAGE 9
IMAGE 8
Flip over the connected bottom trays and put them on lower slots of long support boards. Make sure the 2
ends of these bottom trays go into the lower slots and rest in them with enough contact as shown in Image
8. Adjust the height of the higher long support board slightly to hold these bottom boards if necessary.
middle slots
for 7.25” depth
lower slots
for 7.25” depth
Long
Support
Board
Long
Support
Board
connected
bottom trays

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
10
IMAGE 9
IMAGE 9
IMAGE 9
IMAGE 10
Punch down the perforated round pannel on the top covers on both sides, as shown in Image 9. Then, put
the top covers on the bottom trays, as shown in Image 10.
Note: Use a utility knife to cut off the perforated round pannel if it’s hard to punch down.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
11
IMAGE 9
IMAGE 11
Push down the higher long support board to the bottom, as shown in Image 11.
Long
Support
Board
Long
Support
Board

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
12
IMAGE 9
IMAGE 12
Long
Support
Board
Slide the remaining boards into place, as shown in Image 12.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Long
Board B
X 2 Short
Board B
X 2

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
13
IMAGE 13
IMAGE 14
Carefully flip over the planter so that it lays flat with the long support boards pointing towards the sky. Insert
caster wheels into corner brackets, as shown in Image 13and Image 14.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
2014
IMAGE 15
Fix the wheels with bollts and nuts, as shown in Image 15.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
15
IMAGE 16
Fasten bolts and nuts with nut driver and hex key which are included in pack , as shown in Image 16.
nut driver
Hex key

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
16
IMAGE 17
Flip over the planter again so it stands upright, as shown in Image 17.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
17
IMAGE 18
Seal the small gaps between reservoirs and the gaps between reservoir and short boards with black tape,
as shown in Image 18.

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
18
IMAGE 19
Insert two fill tubes to the bottom through the holes near corners, as shown in Image 19. Please pay attention
to the direction of the fill tube, make sure the ends with small holes go into the reservoir.
Top
Bottom

Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Water Level
Indicator
Water Level
Indicator
Cap
Fill Tube
Lid
Assembly
19
2019
IMAGE 20 IMAGE 21
Insert water level indicator into the cap, as shown in Image 20. Then, put them into the fill tube, as shown
in Image 21. Put the fill tube lid onto another fill tube. When you fill water, just remove the lid. Please do
not misplace the lid after watering.
Note: Please keep the replacement parts in safe place. You may need them in the future.
Max*
Max*: Water in reservoirs is full.
Min*: Almost no water in reservoirs.
Min*
water
inlet

519
2025
Self-Watering Mobile Elevated Garden - 36" L x 18" W x 36" H
5
Assembly
19
20
IMAGE 22
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4
end caps, as shown in Image 22.
Rubber
Mallet
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1