Everbloom Two Tiers Raised Garden Bed User manual

Two Tiers Raised Garden Bed
3’ L x 6’ W - 7” H & 14” H
Installation Guide
Please Read the instructions carefully to familiarize yourself with every detail
and step involved. Keep this manual for future reference. Find a suitable
space to assemble the Everbloom Garden Bed.
You need at least 37-3/4” x 79-1/2” (96 x 160cm) for the finished product. A
flat and firm area (like a garage floor or flat yard space) is perfect! The only
tool you may need is a rubber mallet.
BEFORE YOU START
IMPORTANT NOTES
Small parts are included; we advise you to keep them away from children
and pets.
We also suggest having another person help you assemble.
Load capacity: approximately 16 cu. ft. of soil
RBD1233

PARTS LIST
Post Cap
X 16
Long Board
X 11
960mm
Left Corner
Post
(360mm) X 1
Top
Bottom
Right Corner
Post
(360mm) X 1
Top
Left Corner
Post
(180mm) X 1
Top
Right Corner
Post
(180mm) X 1
Top
Bottom
Top
Bottom
Top
Bottom
Bottom Bottom
Left Joiner
Corner
X 1
Right Joiner
Corner
X 1
Garden Bed
Liner
X 2
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed

1ASSEMBLY
Start by making sure each corner post is oriented correctly. Reference image 1. Slide one long board into the
corner posts from above.
Note: The long boards need to be placed in the inward “U” shape of the brackets. (Image 2).
Left Joint
Corner Post
Left
Corner
Post
Long
Board
Image 1
Image 2
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed
Right Joiner
Corner
Left Joiner
Corner
Left Corner
Post
(360mm)
Right Corner
Post
(360mm)
Left Corner
Post
(180mm)
Right Corner
Post
(180mm)

2ASSEMBLY
Slide the other six long boards into the corner posts from above, as shown in image 3.
Image 3
Long
Board
Long
Board
Long
Board
Long
Board
Long
Board
Long
Board
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed
Right Joiner
Corner
Left Joiner
Corner
Left Corner
Post
(360mm)
Right Corner
Post
(360mm)
Left Corner
Post
(180mm)
Right Corner
Post
(180mm)

Long
Board
Long
Board
Right Joiner
Corner
Left Joiner
Corner
Left
Corner
Post
(360mm)
Right
Corner
Post
(360mm)
Left Corner
Post
(180mm)
Right Corner
Post
(180mm)
3ASSEMBLY
Slide the remaining four long bards in to for the second layer, as shown in image 4.
Image 4
Long
Board
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed

4ASSEMBLY
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the
14 endcaps, as shown in image 5.
Image 5
Post Cap
X 3
Post Cap
X 2 Rubber
Mallet
Post Cap
X 3
Post Cap
X 2
Post Cap
X 2
Post Cap
X 2
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed

5ASSEMBLY
Unfold the liners and cover the bottom of the garden bed, as shown in Image 6 and Image 7.
Note: The liner is water-proof. You can use a needle to puncture the liner if you want water to fall through the
bottom boards.
Image 7
Image 6
Garden Bed
Liner
Garden Bed
Liner
3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed

Questions or Comments?
Email us at ser[email protected]
Welcome to our website:
www.everbloom-garden.com
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: [email protected]