Everbloom E334518W User manual

Elevated Garden Bed, wheeled
45” L x 18” W x 33" H
Installation Guide
Please Read the instructions carefully to familiarize yourself with every detail
and step involved. Keep this manual for future reference. Find a suitable
space to assemble the Everbloom Garden Bed.
You need at least 46” x 19” (117 x 49cm) for the finished product. A flat and
firm area (like a garage floor or flat yard space) is perfect! The only tool you
may need is a rubber mallet.
BEFORE YOU START
IMPORTANT NOTES
Small parts are included; we advise you to keep them away from children
and pets.
We also suggest having another person help you assemble.
Load capacity: approximately 4 cu. ft. of soil
E334518W

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
PARTS LIST
Garden Bed
Liner
X 1
Post Cap
X 8
Bolt
X 4
Nut
X 4
Nut Driver
X 1
Hex Key
X 1
Caster Wheel
X 4
Right Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long
Board
X 2
1140mm
Short
Board A
X 2
400mm
Bottom
Board
X 4
440mm
Left Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long Support
Board
X 2
1140mm
Short
Board B
X 2
400mm

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
Left Corner
Post
Right Corner
Post
Short
Board B
1
ASSEMBLY
Top
Bottom
Start by making sure each corner post is oriented correctly. Refer to image 1 and ensure that the 8 holes are
on the bottom half of the standing corner posts. Slide one short board B into the corner brackets from above.
Note: The short boards need to be placed in the inward “U” shape of the brackets. (Image 2).
5 holes8 holes
Image 1 Image 2

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
Long Support
Board
Long Support
Board
2
Left Corner
Post
Right Corner
Post
Short
Board B
ASSEMBLY
Slide the long support boards into the corner posts, as shown in Image 3.
Image 3

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
3
Bottom
Board
X 4
Left Corner
Post
Right Corner
Post
Short
Board B
Image 4
Long Support
Board
Long Support
Board
ASSEMBLY
Carefully flip over the garden bed so that it lays flat with the long support boards pointing towards the sky. Slide
the bottom boards through the slots of the long support boards. All 4 boards can be slided in now. (image 4)

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
4
Image 5
ASSEMBLY
Slide the remaining corner posts into place as shown in Image 5. Ensure that the direction of the each post is
symmetric for the remaining short board.
Left Corner
Post
Right Corner
Post
Bottom
Board
X 4
Left Corner
Post
Right Corner
Post
Short
Board B
Long Support
Board
Long Support
Board

Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
5
ASSEMBLY
Slide one short board B into the corner brackets, as shown in Image 6.
Image 6
Short
Board B
Left Corner
Post
Right Corner
Post
Bottom
Board
X 4
Left Corner
Post
Right Corner
Post
Short
Board B
Long Support
Board
Long Support
Board

6
Image 7
ASSEMBLY
Flip over the bed so it stands upright. Slide the remaining boards into place, as shown in image 7.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
Short
Board A
Long
Board
Long
Board
Short
Board A

7
Image 8
ASSEMBLY
Use the rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as
shown in Image 8.
Post Cap
X 2
Post Cap
X 2
Post Cap
X 2
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
Rubber
Mallet
Post Cap
X 2

8
Image 10
Image 9
ASSEMBLY
Carefully flip over the garden bed again so that it lays flat with the long support boards pointing towards the
sky. Insert caster wheels into corner brackets, as shown in Image 9 and Image 10.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H

9
Image 11
ASSEMBLY
Fix the wheels with bollts and nuts, as shown in Image 11.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H

10
Image 12
ASSEMBLY
Fasten bolts and nuts with nut driver and hex key which are included in pack , as shown in Image 12.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H

11
Image 13
ASSEMBLY
Flip over the bed again so it stands upright, as shown in Image 13.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H

12
Garden Bed
Liner
Image 15
Image 14
ASSEMBLY
Unfold the liner and cover the bottom of the garden bed, as shown in Image 14 and Image 15.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H

13
Image 16
Image 15
Notes
Sometimes there might be mis-alignment of corner brackes as showed in Image 15 and Image 16, which
may result in difficulty of sliding boards into the bracks. Please adjust them to the right position.
Elevated Garden Bed, wheeled 45” L x 18” W x 33" H
ASSEMBLING PROBLEM 1
ASSEMBLING PROBLEM 2

Questions or Comments?
Email us at ser[email protected]
Welcome to our website:
www.everbloom-garden.com
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: [email protected]