Everbloom R144524 User manual

You need at least 45” x 24” (116 x 61cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tool you may need is a
rubber mallet.
Small parts are included; we advise you to keep
them away from children and pets.
We also suggest having another person help you
assemble. Maximum Load capacity: approximately
7 cu. ft. of soil
Questions or Comments?
Email us at [email protected]
Everbloom-Garden.com
Wall Side Deep Root Raised Garden Bed
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for future reference. Find a suitable space to
assemble your new Wall Side Raised Garden Bed.
Important Notes
Model# R144524
Dimensions 45" L x 24" W x 14" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Post Cap
X 4
Long Board
X 4
1140mm
Short Board
X 4
540mm
Left Corner
Post
X 2
Top
Bottom
Right Corner
Post
X 2
Top
Bottom
+ 2pc
replacement
Parts List
2

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Assembly
3
IMAGE 1
IMAGE 2
Start by making sure each corner post is oriented correctly. Reference image 1. Slide one short board into
the corner posts from above.
Note: The boards need to be placed in the inward “U” shape of the brackets. (Image 2).
Left Corner
Post
Right
Corner
Post
Short
Board
Left Corner
Post
Left Corner
Post
Right Corner
Post
Right Corner
Post

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Assembly
4
IMAGE 3
Slide the other short board and two long boards into the corner posts from above, as shown in Image 3.
Left
Corner
Post
Left
Corner
Post
Right Corner
Post
Right Corner
Post
Long
Board
Long
Board

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Assembly
5
IMAGE 4
Slide the rest four boards to form the second layer, as shown in Image 4.
Note：If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Left
Corner
Post
Left
Corner
Post
Right
Corner
Post
Right Corner
Post
Long
Board
Short
Board
Short
Board
Long
Board

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Assembly
6
IMAGE 5
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the
4 end caps, as shown in Image 5.
Note: Store the additional
caps for future use.
Post Cap
X 1
Post Cap
X 1 Rubber
Mallet
Post Cap
X 1
Post Cap
X 1

Wall Side Deep Root Raised Garden Bed - 45" L x 24" W x 14" H
Notes
IMAGE 6
X
X
Sometimes there might be a misalignment of the Corner Posts as shown in Image 6 and Image 7, which
may result in difficulty of sliding boards into the brackets. Please adjust them to the right position so that
they are parallel to each other, and perpendicular to the ground.
Assembling Problem 1
IMAGE 7
Assembling Problem 2
7

Bloom On.
Distributed by:
Dynaforge Trading LLC
St. Paul, MN55101
Email: ser[email protected]
Everbloom-Garden.com
US Patent Pending
Subscribe at www.everbloom-garden.com for
extra savings and upgrading information!