Everbloom E334519W User manual

You need at least 46” x 20” (117 x 51cm) for the finished
product. A flat and firm area (like a garage floor or flat
yard space) is perfect! The only tools you may need are
arubber mallet and a #2 Phillips screwdriver.
Small parts are included; we advise you to keep
them away from children and pets.
We alsosuggest having another person help you
assemble. Maximum Load capacity: approximately
4 cu. ft. of soil
Questions or Comments?
Email us at [e-mail]
Everbloom-Garden.com
Urban Mobile Garden
Installation Guide
Thank You!
You’re only a few steps away from your perfect vegetable
garden or elevated planter. We hope you enjoy!
Before You Start
Please read the instructions carefully to familiarize
yourself with every detail and step involved. Keep this
manual for futurereference. Findasuitable space to
assemble your new Elevated Garden Bed.
Important Notes
Model# E334519W / E334519WG
Dimensions 45" L x 19" W x 36" H
1
Subscribe at www.everbloom-garden.com
for extra savings and upgrading information!

Urban MobileGarden - 45" L x 19" W x 36" H
Parts List
2
Garden Bed
Liner
X 1
Post Cap
X 4
Bolt
X 4
Nut
X 4
Nut Driver
X 1
Hex Key
X 1
Caster Wheel
X 4
Right Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long
Board
X 2
1140mm
Short
Board A
X 2
420mm
Bottom
Board
X 6
460mm
Left Corner
Post
X 2
Top
Bottom
5 holes8 holes
Long Support
Board
X 2
1140mm
Short
Board B
X 2
420mm
+ 2pc
replacement

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
3
IMAGE1
10”
(25cm)
Long Board
Long Support Board
Bottom Boards
Depth 1 - 10” from page 4
IMAGE2Depth 2 - 7.5” from page 10
There are 2 different assembly methods providing 2 different planting depths: 10” (as shown in
Image 1) and 7.5” (as shown in Image 2).
* For deeper planting depth of 10”, please follow steps from page 4.
* For easier but shallower planting depth of 7.5”, please go to page 10.
7.5”
(19cm)
Long Board
Long Support Board
Bottom Boards

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
4
IMAGE3IMAGE4
Left
Corner
Post
Right
Corner
Post
Short
Board B
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3. Slide one short board B
into the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4.
5holes8 holes

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
5
IMAGE5
Left Corner
Post
Left Corner
Post
Right Corner
Post
Right Corner
Post
Short
Board B
Slide another short board B into the other two corner brackets from above, as shown in Image 5.
Short
Board B

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
6
IMAGE6
With the help of another person holding the 2 assembled parts, slide the 2 long supporting boards into the
brackets from above. Make sure that one support board goes straight to the bottom, while the other one
stays in the middle of the way (don’t push to the bottom), with the top edge between the 2nd and 3rd holes
of the post.
Long
Support
Board
Long
Support
Board
in the
middle of
the way
to the
bottom

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
7
IMAGE7
Put the bottom boards on lower slots of long support boards. Make sure the 2 ends of these bottom boards
go into the lower slots and rest in them with enough contact as shown in Image 7. Adjust the height of the
higher long support board slightly to hold these bottom boards ifnecessary.
Bottom
Board x 6
lower slot
Long
Support
Board
Long
Support
Board

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
8
IMAGE8
Push down the higher long support board to the bottom, as shown in Image 8.
Long
Support
Board
Long
Support
Board

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
9
IMAGE9
Slide the remaining boards into place, as shown in Image 9. Now you get an elevated garden bed with 10”
planting depth. Then, go to page 15, and follow the steps afterwards.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Short
Board A
Long
Board
Long
Board
Short
Board A

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
10
IMAGE3aIMAGE4a
Left
Corner
Post
Right
Corner
Post
Short
Board B
Top
Bottom
Start by makingsure each corner post is oriented correctly, as shown in Image 3a. Slide one short board B
into the corner brackets from above.
Note: Theshort boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4a.
5holes8 holes

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
11
IMAGE5a
Left Corner
Post
Left Corner
Post
Right Corner
Post
Right Corner
Post
Short
Board B
Slide another short board B into the other two corner brackets from above, as shown in Image 5a.
Short
Board B

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
12
IMAGE6a
With the help of another person holding the 2 assembled parts, slide the 2 long support boards into the brackets
from above, as shown in Image 6a.
Long Support
Board
Long Support
Board

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
13
IMAGE7a
Put the bottom boards on the long support boards, as shown in Image 7a.
Long Support
Board
Bottom
Board
X 6

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
14
IMAGE8a
Slide the remaining boards into place, as shown in Image 8a. Now you get an elevated garden bed with
7.5” planting depth.
Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step,
to avoid disassembling the boards later.
Long Support
Board
Short
Board A
Long
Board
Long
Board
Short
Board A

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
15
IMAGE10
IMAGE 11
Carefully flip over the garden bed again so that itlays flat with the long support boards pointing towards the
sky. Insert caster wheels into corner brackets, as shown in Image 10 and Image 11.

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
16
IMAGE12
Fix the wheels with bollts and nuts, as shown in Image 12.

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
17
IMAGE13
Fasten bolts and nuts with nut driver and hex key which are included in pack , as shown in Image 13.
nut driver
Hex key

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
18
IMAGE14
Flip over the bed again soitstands upright, as shown in Image 14.

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
19
IMAGE15
If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4
end caps, as shown in Image 15.
Rubber
Mallet
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1
Post Cap
X 1

Urban MobileGarden - 45" L x 19" W x 36" H
Assembly
20
IMAGE 16
x 8
IMAGE 17
For additional stability when mobile, we highlysuggest using the included 8 self-tappingscrews with washers
(Image 16). Fasten 2screws into each side of the inward facing corner posts using a #2 Phillips screwdriver
(not included), as shown in Image 17.
Screws also can be fastened from outside, as shown in Image 18.
Do not fasten the screws into the same height holes facing to each other on the same post.
IMAGE18