Everbloom WK2K4 User manual

4PK 2” Caster Wheels
Installation Guide
1. Insert the wheel
Before installation the wheels, carefully flip over the
garden bed so that it lays flat with the long support
boards pointing towards the sky.
Pay attention to the
direction of wheel and
the carner post.
1a 1b
2. Insert the bolt
3.
Turn on the nylon lock nut
Insert from inside to
outside.
2a 2b
4. Tighten the fasteners
Please use a 5mm hex
wrench and a 13mm
combination wrench
5. Assemble the
remaining wheels
using the same
method. The direction
of each wheel aligns
with the corner posts,
as shown in Pictures
1c and 5a.
4a
5a
4b
6. After installing two wheels, carefully flip over the
garden bed in the opposite direction, and install
another two wheels.
Model#: WK2K4
Questions or Comments?
Email us at ser[email protected]
Welcome to our website: www.everbloom-garden.com
Suggested tools
1. 5mm hex wrench, preferably with T-handle
2. 13mm combination wrench, preferably with ratchet
Install on Everbloom
ERB3332 Elevated Garden Bed
E333612 Elevated Deep Trough Garden Bed
Installation 1
1c
3a 3b

Before installation the wheels, carefully flip over the
garden bed so that it lays flat with the short boards
pointing towards the sky.
Model#: WK2K4
Questions or Comments?
Email us at ser[email protected]
Welcome to our website: www.everbloom-garden.com
Install on Everbloom
E213612 Deep Trough Planter Box /
E211719 Corner Stone Planter Box /
E144519 Deskside Planter Box /
E143612 Trough Planter
1. Take off bolts and nuts on the post bracket with
hex key and nut driver, as shown in Pic. 1a and
Pic.1b.
Note:
Please do not move or take out the support bracket
inside the post.
1b1a
2. Insert the wheel 3. Insert the longer bolt
4. Turn on the nylon lock nut and fasten it
5. Insert another longer bolt in the pack from side
to side. Turn on the nut and fasten it. Be sure it
gose through the support brack inside the post.
6. Take off the bolts and nuts on post brackets on
the other side, and insert the wheel. Fix it with
longer bolts and nuts.
8. Flip over the bed again so it stands upright
7. Flip over the garden
bed, then install another
two wheels follow steps
above.
2
5a 5b
4b
3
6a
6c
6b
7
8
Installation 2