EverFocus eNVP-JNN-IV-V0008 User manual

AI Mobile NVR with 8 PoE Ports
Based on NVIDIA Jetson Nano / TX2 NX / Xavier NX
eNVP-JNN-IV-V0008 (eIVP1570VE)
eNVP-JTX-IV-V0008
eNVP-JNX-IV-V0008
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May 2021

AI Mobile NVR with 8 PoE Ports
Based on NVIDIA Jetson Nano / TX2 NX / Xavier NX
eNVP-JNN-IV-V0008 (eIVP1570VE)
eNVP-JTX-IV-V0008
eNVP-JNX-IV-V0008
User’s Manual
1995-2021 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
Acknowledgements
-NVIDIA is a trademark of the NVIDIA Corporation.
-All other product names or trademarks are properties of their respective owners.

ii
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual
for future references.
All cautions and warnings on the device should be noted.
All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
Make sure the power source matches the power rating of the device.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
Always completely disconnect the power before working on the system’s hardware.
No connections should be made when the system is powered as a sudden rush of power
may damage sensitive electronic components.
If the device is not to be used for a long time, disconnect it from the power supply to avoid
damage by transient over-voltage.
Always disconnect this device from any AC supply before cleaning.
While cleaning, use a damp cloth instead of liquid or spray detergents.
Make sure the device is installed near a power outlet and is easily accessible.
Keep this device away from humidity.
Place the device on a solid surface during installation to prevent falls.
Do not cover the openings on the device to ensure optimal heat dissipation.
Watch out for high temperatures when the system is running.
Do not touch the heat sink or heat spreader when the system is running.
Never pour any liquid into the openings. This could cause fire or electric shock.
As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-shielded containers.
If any of the following situations arises, please contact our service personnel
([e-mail]):
-Damaged power cord or plug
-Liquid intrusion to the device
-Exposure to moisture
-Device is not working as expected or in a manner as described in this manual
-The device is dropped or damaged
-Any obvious signs of damage displayed on the device
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES
BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO
PREVENT DAMAGE.

iii
FCC Statement
This dev
ice complies with Part 15 FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

iv
TABLE OF CONTENTS
1. Introduction ............................................................................................................................ 1
1.1 Key Features and Comparison ........................................................................................ 1
1.2 Dimensions...................................................................................................................... 2
1.3 Packing List...................................................................................................................... 2
1.4 Optional Accessories....................................................................................................... 2
1.5 Front Panel...................................................................................................................... 3
1.6 Rear Panel ....................................................................................................................... 4
1.7 Carrier Board................................................................................................................... 5
2. Connection and Installation.................................................................................................... 6
2.1 Mounting......................................................................................................................... 6
2.2 Vehicle Connection ......................................................................................................... 7
2.2.1 Connecting to a Truck with 24VDC ............................................................................. 7
2.2.2 Connecting to a Car with 12VDC................................................................................. 8
2.3 SSD Installation ............................................................................................................... 9
3. Specification.......................................................................................................................... 10
3.1 eNVP-JNN-IV-V0008 (eIVP1570VE)............................................................................... 10
3.2 eNVP-JTX-IV-V0008....................................................................................................... 12
3.3 eNVP-JNX-IV-V0008 ...................................................................................................... 14

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
1
1. Introduction
EverFocus eNVP-JNN-IV-V, eNVP-JTX-IV-V and eNVP-JNX-IV-V are fanless AI mobile NVRs based on
NVIDIA® Jetson™ Nano, TX2 NX and Xavier NX respectively, all of the models are fanless and
designed for AIoT market including transportation, smart building and etc..
The models can be installed with EverFocus in-house designed NVR software, providing basic NVR
functions like real-time live view, video recording, video playback, alarm notification and more. AI
functions such as driver fatigue and distraction monitoring, pedestrian detection and vehicle
detection can be performed using the NVR software. To cater to the transportation market, this AI
mobile NVR supports wireless network, GPS, G-sensor, 9-36V wide DC range and complies with
MIL-STD-810G standard.
The models support up to 8 PoE ports and wide operating temperature ranging from -20°C to 65°C.
It also features one removable 2.5 SATA SSD tray, one SIM card slot, two mini PCIe interfaces and
RS-232/RS-485 interfaces, which carries everything you need for computing in your application.
1.1 Key Features and Comparison
Model Name eNVP-JNN-IV-V0008 eNVP-JTX-IV-V0008 eNVP-JNX-IV-V0008
Jetson Family NVIDIA® Jetson™Nano NVIDIA® Jetson™ TX2 NX NVIDIA® Jetson™Xavier NX
AI Performance 472 GFLOPs 1.33 TFLOPs 21 TOPs
CPU Quad-core ARM®
Cortex®-A57 MPCore
Dual-core NVIDIA Denver 2 64-
bit CPU and quad-core ARM
A57 Complex
6-core NVIDIA Carmel
ARM®v8.2 64-bit CPU 6MB L2 +
4MB L3
GPU
128-core NVIDIA
Maxwell™ GPU
NVIDIA Pascal™ Architecture
GPU with 256 CUDA cores
384-core NVIDIA Volta™ GPU
with 48 Tensor Cores
Memory
Onboard 4 GB 64-bit
LPDDR4 25.6GB/s
Onboard 4GB 128-bit LPDDR4,
1600 MHz - 51.2GBs
Onboard 8 GB 128-bit LPDDR4x
@ 1600 MHz 51.2GB/s
Storage (OS) 16 GB eMMC 5.1
Video Input IP camera x 8 IP camera x 16
Video Decode Up to 1 x 4K @60fps Up to 2 x 4K @60fps
Video Output HDMI (2.0 a/b maximum 3840 x 2160) x 1; VGA x 1 (optional)
Network GbE port x1, PoE ports (10/100 MbE, total 75W) x 8
Certificate CE, FCC, (EN50155, E-Mark project-based)
For more details about the spec, please refer to Chapter 3 Specification.
Chapter
1

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
2
1.2 Dimensions
1.3 Packing List
•AI Mobile NVR x 1
•Power Harness Cable x 1 (Please refer to
2.2 Vehicle Connection)
•SSD Lock Key x 2
•Bracket Screw Kit x 1 (with 4 screws and 8
spacers. Please refer to 2.1 Mounting)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
1.4 Optional Accessories
Part Number / Item
5SSWD1TSA00002R WD 2.5'' Blue SATA SSD 1TB
4B01XUD19090AS1 Adaptor I:90-264V,47~63Hz O:19V/4.74A
21PLS8EUA00001R 4G module; Gemalto 4G-EU with Packing
3EMV161FST0004R GPS module package
21SPL273A00001R AC Wifi module package (EMV1200/800/400 WiFi AC 5G WiFi module)

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
3
1.5 Front Panel
132 4 5
7
689
No. Name Description
1 SSD Key Lock Lock and unlock the SSD tray (see 2.3 SSD Installation).
2 SD Card Slot Insert a SD card to the card slot.
3 SIM Card Slot Insert a SIM card to the card slot.
4 LAN/WAN One 10/100/1000 Base-Tx Ethernet ports for connecting to the
network.
5 IR This function is currently reserved.
6 LED Indicator HDD: HDD LED indicator.
Fail: System Fail LED indicator.
7 PoE Ports PoE ports (10/100 MbE, total 75W) for connecting to the IP cameras
or other PoE devices.
8 USB2.0 USB2.0 port.
9 Power Indicator Power LED indicator.

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
4
1.6 Rear Panel
1 2 2 3
4 5 6 7 8 9
10
No.
Name
Description
1 Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
2 Antenna Connects the antenna to the AI mobile NVR for 3G / 4G / WiFi / GPS
functions.
3 VGA Port This port is currently reserved.
4 Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
5 USB3.0 USB3.0 port.
6 HDMI Port HDMI display output.
7 RS-232 Port COM port for RS-232.
8 RS-485 Port COM port for RS-485.
9 Alarm IO Provides 4 alarm inputs and 4 alarm outputs.
10 DC Power
Input
Connecting to the power source. For details, please refer to 2.2 Vehicle
Connection.

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
5
1.7 Carrier Board
Main Board Power Board
IO Board
eIVP1570VE-CB
1
Console
12
Audio In
2
VGA
13
USB 3.0
3
HDD Thermal Sensor
14
HDMI
4
HDD Heater (Reserved)
15
RS232
5
HDD Power
16
RS485
6
Video In / Camera Power
17
Alarm IO (4-input, 4-output)
7
SATA Port x 2
18
Power In
8
10/100 Ethernet PoE Port x 8
19
SIM Card slot
9
USB Port
20
SD Card slot
10
OTG
21
3G, 4G
11
Audio Out
22
GPS
Dimensions (W x D x H)
Main Board: 170 x 179.3 x 35 mm / 6.7" x 7.1" x 1.38"
Power Board: 30.1 x 98 x 25 mm / 1.19" x 3.85" x 0.98"
IO Board: 45 x 98.3 x 18 mm / 1.77" x 3.87" x 0.71"