EverFocus ECOR960 4F2 User manual

ECOR960 4F2 / 8F2 / 16F2 DVR
4 / 8 / 16 CH, H.264, 960H
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: February, 2014
Notice: This content is subject to be changed without notice.

EVERFOCUS ELECTRONICS CORPORATION
ECOR960 4F2 / 8F2 / 16F2
User’s Manual
2014 EverFocus Electronics Corp
www.everfocus.com
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the Everfocus Electronics Corporation.
Release Date: February, 2014
QuickTime is a registered trademark of the Apple Computer, Inc.
Windows is a registered trademark of the Microsoft Corporation.
Linksys is a registered trademark of the Linksys Corporation.
D-Link is a registered trademark of the D-Link Corporation.
DynDNS is a registered trademark of the DynDNS.org Corporation.
Other product and company names mentioned herein may be the trademarks of their respective owners.

ii
Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or
system installers.
Do not block the ventilation openings or slots on the cover.
Do not drop metallic parts through slots. This could permanently damage the appliance.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts inside. Contact qualified service
personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this
may damage the appliance.
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do
take immediate action if the appliance becomes wet. Turn the power off and refer servicing
to qualified service personnel. Moisture may damage the appliance and also may cause
electric shock.
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild
detergent and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or
high humidity exists. Use the DVR at temperatures within 0°C~40°C / 32°F~104°F (Storage).
The input power source is 12 VDC.
Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to.

iii
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or
aerosol cleaners. Use a damp cloth for cleaning
Attachments
Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor
installation, or any area which is classified as a wet location.
Servicing
Do not attempt to service this unit by yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them, playing particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the appliance.
Object and Liquid Entry
Never push objects of any kind into this unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the unit.
Battery
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
ATTENTION! This is a class A product which may cause radio interference in a
domestic environment; in this case, the user may be urged to take adequate measures.

iv
This Product is RoHS compliant.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the users’ authority to operate this equipment.
WEEE
The information in this manual was current upon publication. The manufacturer reserves the right
to revise and improve his products. Therefore, all specifications are subject to change without prior
notice. Manufacturer is not responsible for misprints or typographical errors.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for
later reference.
Your EverFocus product is designed and manufactured with high quality materials and
components which can be recycled and reused. This symbol means that electrical and
electronic equipment, at their end-of-life, should be disposed of separately from your
household waste. Please, dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection systems
for used electrical and electronic product.
Please, help us to conserve the environment we live in!
This product complies with the High-Definition Multimedia Interface (HDMI)
Specification Adopter Agreement.

v
TABLE OF CONTENTS
1. Introduction................................................................................................................... 1
1.1 Features......................................................................................................................... 4
1.2 Packing List .................................................................................................................... 5
1.3 Optional Accessories ..................................................................................................... 5
1.4 Front Panel .................................................................................................................... 6
1.5 Rear Panel...................................................................................................................... 8
2. Installation................................................................................................................... 10
2.1 Hard Disk installation .................................................................................................. 10
2.1.1 Hard Disk Compatibility List.............................................................................. 14
2.2 Basic Connection ......................................................................................................... 15
2.2.1 Monitor Connection ......................................................................................... 16
2.2.2 Alarm I / O......................................................................................................... 17
2.2.3 RS-485 Port ....................................................................................................... 18
2.3 Turning On / Off the Power......................................................................................... 18
2.4 Checking the Dynamic IP Address ............................................................................... 19
2.5 Connecting the DVR to the Network........................................................................... 22
2.5.1 Router or LAN Connection................................................................................ 22
2.5.2 Direct High-Speed Connection ......................................................................... 25
2.5.3 One-to-One Connection ................................................................................... 26
3. Mouse and Front Panel Button Operation .................................................................... 30
3.1 USB Mouse Operation................................................................................................. 30
3.1.1 How to Select a Channel / Enable Audio.......................................................... 30
3.1.2 OSD Root Menu ................................................................................................ 30
3.1.3 Field Input Options ........................................................................................... 31
3.2 Front Panel Buttons Operation ................................................................................... 32
3.2.1 Front Panel Review........................................................................................... 32
3.2.2 How to Select a Channel / Enable Audio.......................................................... 32
3.2.3 OSD Root Menu ................................................................................................ 32
3.2.4 Field Input Options ........................................................................................... 33
3.3 General Operation....................................................................................................... 34
3.3.1 Login ................................................................................................................. 34
3.3.2 Camera Selection.............................................................................................. 35
3.3.3 Audio Selection................................................................................................. 36
4. OSD Root Menu ........................................................................................................... 37
4.1 PTZ ................................................................................................................................... 39

vi
4.1.1 Express Control of PTZ...................................................................................... 41
4.2 Layout Switching ......................................................................................................... 42
4.3 Channel Switching ....................................................................................................... 42
4.4 Display ......................................................................................................................... 43
4.5 Sequence ..................................................................................................................... 43
4.6 Zoom............................................................................................................................ 44
4.7 Archiving the Recordings or Log Data to the USB....................................................... 45
4.8 Logout.......................................................................................................................... 46
4.8.1 Temporarily Logout .......................................................................................... 47
5. Search and Playback..................................................................................................... 48
5.1 Quick Playback............................................................................................................. 48
5.2 Playback Bar ................................................................................................................ 49
5.3 Searching the Recordings for Playing Back ................................................................. 51
5.3.1 Time Search ...................................................................................................... 51
5.3.2 Event Search ..................................................................................................... 52
5.3.3 Smart Search..................................................................................................... 53
5.3.4 Snapshot Search ............................................................................................... 55
6. Configuration............................................................................................................... 57
6.1 Express......................................................................................................................... 59
6.2 Camera ........................................................................................................................ 61
6.2.1 Basic Setting...................................................................................................... 61
6.2.1.1 Display Aspect Ratio ........................................................................................ 63
6.2.2 Adjust Setting ................................................................................................... 64
6.3 Record ......................................................................................................................... 65
6.4 Event............................................................................................................................ 66
6.4.1 Alarm ................................................................................................................ 66
6.4.2 Video Loss......................................................................................................... 68
6.4.3 Motion .............................................................................................................. 70
6.4.4 Other................................................................................................................. 73
6.5 Hard DISK...................................................................................................................... 79
6.5.1 Disk79
6.5.2 Lock/Format...................................................................................................... 80
6.6 Display Setting............................................................................................................. 81
6.6.1 Monitor OSD..................................................................................................... 81
6.6.2 M/T SEQ............................................................................................................ 82
6.7 Network Settings......................................................................................................... 83
6.7.1 LAN 83
6.7.2 Email ................................................................................................................. 86
6.7.3 DDNS................................................................................................................. 87
6.7.4 FTP 90

vii
6.7.5 Alarm Server ..................................................................................................... 91
6.7.6 Network Testing ............................................................................................... 92
6.8 Schedule Setting.......................................................................................................... 93
6.8.1 Express Setup.................................................................................................... 93
6.8.2 Holidays ............................................................................................................ 94
6.8.3 Schedule ........................................................................................................... 95
6.9 System Setting............................................................................................................. 98
6.9.1 Date / Time ..................................................................................................... 98
6.9.2 Daylight Saving ................................................................................................. 99
6.9.3 User Group...................................................................................................... 100
6.9.4 User Management.......................................................................................... 101
6.9.5 I/O Control...................................................................................................... 104
6.9.6 EKB200 Setting................................................................................................ 105
6.9.7 Miscellaneous................................................................................................. 107
6.10 Information ............................................................................................................. 109
6.10.1 System ......................................................................................................... 109
6.10.2 Log................................................................................................................ 110
7. Remote Access to the DVR ......................................................................................... 111
7.1 Accessing the DVR on the Network........................................................................... 111
7.2 Install JAVA Runtime ................................................................................................. 113
7.3 Browser Security Setting ........................................................................................... 115
7.3.1 Installing ActiveX Controls.............................................................................. 115
7.3.2 Enabling ActiveX Controls............................................................................... 116
7.4 Remote Live View...................................................................................................... 119
7.5 Menu Bar................................................................................................................... 121
7.6 Remote Playback....................................................................................................... 122
8. Specifications............................................................................................................. 123
9. Troubleshooting......................................................................................................... 125
Appendix A: Network Overview......................................................................................... 126
Appendix B: Linksys & D-Link Port Forwarding ................................................................... 130
Appendix C: Timing of Alarm Modes .................................................................................. 134
Appendix D: Express Setup Recording Value Selection Rules .............................................. 137
Appendix E: IR Remote Control.......................................................................................... 139

viii
Important Notice
The 960H DVR is designed to deliver and record the best analog image quality of 700TVL
cameras in WD1 mode (NTSC: 960x480 / 960x240 / 480x240; PAL: 960X576 / 960X288 /
480X288). The DVR also provides the flexibility for users to change the Recording Format from
WD1 to D1 mode (NTSC: 704X480 / 704X240 / 352X240; PAL: 704X576 / 704X288 / 352X288) if
needed. To select the desired Recording Format, please see 6.6.1 Monitor OSD.
Before switching the WD1 / D1 modes, please be advised of the following notes:
1. Switching between the WD1 and the D1 mode will REBOOT the DVR.
2. Resolution selection options will change as the mode switches, please refer to 6.2.1 Basic
Setting.

ECOR960 4F2 / 8F2 / 16F2
1
1. Introduction
EverFocus brings you the next generation of analog recording. The new ECOR960 4F2 / 8F2 /16F2
digital video recorder benefits users by digitizing the highest quality, state of the art 960H cameras
for live and remote monitoring, surveillance review, and archival. The ECOR960 4F2 / 8F2 / 16F2
also supports (120 / 240 / 480 FPS total) recording over 4 / 8 /16-channels @ WD1 (960x480 /
960x576) resolution, providing the ability to capture objects at enhanced detail levels.
The ECOR960 4F2 / 8F2 / 16F2 DVR also supports convenient video export operations to USB. Its
dual stream H.264 encoder provides users smooth remote viewing experience in low bandwidth
networks while simultaneously preserving a high quality recording in the DVR hard disk. The
ECOR960 4F2 / 8F2 / 16F2 can provide clear 1080p Full HD Video output to both HDMI and VGA
monitors with an intuitive onscreen user interface for efficient operation. User can also easily
operate the machine using a USB mouse or via the front panel buttons.
When paired with our powerful EverFocus PowerVideo Plus CMS, the ECOR960 4F2 / 8F2 / 16F2
can be used in complex multi-site installations, with centralized management. The ECOR960 4F2 /
8F2 / 16F2 is also fully supported by the EverFocus MobileFocus remote viewer on iOS and
Android devices, which help extend video surveillance from fix location to mobile environments.
960H is the highest resolution for analog CCTV, increasing resolution by 30% compared to D1.
With the better resolution benefited by 960H, the definition of video image will certainly be higher.
Moreover, the 960H CCD sensor performs greater image clarity in low-light environment than IP
and HD-SDI CMOS sensors. A 960H DVR, like our new ECOR960 4F2 / 8F2 / 16F2 DVR, can support
cameras with resolution up to700TVL and you can use the existing coaxial infrastructure without
the need of re-cabling.
Chapter
1

ECOR960 4F2 / 8F2 / 16F2
2
ECOR960 4F2 / 8F2 System Diagram
IR Remote Control
a
*Internal 3.5" HDDs (Optional)
*Analog Camera
Line Level
Audio Out
Line Level
Audio In 1~2
Alarm In
/ Out
Main Monitor
(HDMI)
Call Monitor
(BNC)
Web Remote Client PowerVideo Plus (CMS)
Mouse or USB Memory Stick
Line Level
Audio Out
Main Monitor
(VGA)
Power Supply
RS-485 Device
*Line Level
Audio In 3~8
Audio
Cable
Mouse or USB
Memory Stick
Network
Figure 1-1
* This diagram uses ECOR960 8F2 as an example. The ECOR960 4F2 only has 4 Video Inputs, 4
Audio Inputs, and supports only 1 hard disk drive.

ECOR960 4F2 / 8F2 / 16F2
3
ECOR960 16F2 System Diagram
IR Remote Control
*Internal 3.5" HDDs (Optional)
*Analog Camera
Line Level
Audio Out
Line Level
Audio In
Alarm In
/ Out
Main Monitor
(HDMI)
Call Monitor
(BNC)
Web Remote Client PowerVideo Plus (CMS)
Mouse / USB Memory Stick
Line Level
Audio Out
Main Monitor
(VGA)
Power
Supply
RS-485 Device
Audio Cable
Mouse or USB
Memory Stick
Network
Figure 1-2

ECOR960 4F2 / 8F2 / 16F2
4
1.1 Features
•4 / 8 / 16 CH WD1 real-time recording and playback
•WD1 capability provides higher resolution (960x576 / 960x480) compared to D1
•H.264 compression format for enhancing recording capacity and improving network image
transmission speed
•Two Main Monitors: Both HDMI and VGA ports can be used as the Main monitor outputs at
the same time
•Call Monitor: Sequenced view through composite BNC output with multiplex and sequencing
•Free Everfocus DDNS Service – static IP address is not required for reliable remote access
•Supports live monitoring and playback of video from mobile devices via Mobile applications
(MobileFocus / MobileFocus Plus)
•Multiple Control Inputs: Mouse / front panel / remote controller
•Multiple intelligent video query functionality, including snapshot and smart search
•Powerful archive functionality from both remote and DVR sites
•Simplified access to common features such as setup, archival, playback and search functions
through OSD root menu
•Remote configuration support from built-in web interface
•On-screen PTZ control via mouse, front panel, remote controller or EKB500 keyboard
•Dual USB 2.0 ports for video archive and mouse control
•Integration with EverFocus’ CMS (PowerVideo Plus)
•Multi-language support

ECOR960 4F2 / 8F2 / 16F2
5
1.2 Packing List
•ECOR960 4F2 / 8F2 / 16F2 DVR x1
•Mouse x 1
•
Adaptor x 1
•
Power Cord x 1
•
HDD Mounting Screw x 8 (16F2/8F2)
x 4 (4F2)
•
User Manual x 1
•CD x 1
•Audio Cable x 1
•
BNC to RCA Connector x1 (4F2/8F2)
•
Remote Controller x 1
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping
carton for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. Two SATA cables will be supplied for DVRs without HDDs installed. If the order contains
HDD installation, the SATA cable will not be supplied.
4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
1.3 Optional Accessories
•
EKB200 (USB controller keyboard: connect to the PC or DVR to control the PTZ cameras
connected to the DVR). Please refer to 6.9.6 EKB200 Setting and the User Manual of
the EKB200 Keyboard.
•
EKB500 (RS-485 keyboard: connect to the RS-485 port to control the PTZ cameras
connected to the DVR). Please refer to User Manual of the EKB500 Keyboard.

ECOR960 4F2 / 8F2 / 16F2
6
1.4 Front Panel
ECOR960 4F2
12456789
10
11
12
3
ECOR960 8F2
36
211 10
12
189
ECOR960 16F2
36
13 11 10
12
18 9
Figure 1-3

ECOR960 4F2 / 8F2 / 16F2
7
No. Name Description
1 USB2.0 Port
The USB2.0 ports for connecting to a mouse or external storage
device.
2 View Press the type of layout you want for displaying your channel feeds.
3 SEQ (Sequence)
Press to enter the automatic sequence mode. This will show each
channel feed in sequence.
4 Display
Press to cycle between the info display types (channel and status bar
info).
5 Search Press to enter the Search Setup menu.
6 Copy Press to enter the Copy Menu.
7 Zoom
Press repeatedly to toggle between 2x and 4x zoom. Press the Menu
button to switch zoom off.
8 Arrow Keys Use these arrow keys to change the Menu settings.
9 IR Receiver Receiver for IR Remote Control.
10 Status LED
Power LED: Indicates the power is on.
Record LED: Indicates the DVR is recording.
Alarm LED: Indicates the alarm input is triggered. (Note: ECOR960
16F2 doesn’t have the Alarm LED).
11 Menu Press to enter/exit the Main Setup Menu.
12
Channel 1~4 /
1~8 / 9~16 Press to display the channel in full screen.
13 Channel Switch
Press this button to switch the above channel button numbers
between 1~8 and channel 9~16.

ECOR960 4F2 / 8F2 / 16F2
8
1.5 Rear Panel
ECOR960 4F2
231 4 5 6
7 8 9 10 11 12 13
ECOR960 8F2
23
1456
78910 11 12 13
ECOR960 16F2
23 1 13 5 6
7 8 4 9 10 11 12
Figure 1-4

ECOR960 4F2 / 8F2 / 16F2
9
No. Name Description
1 Video Input Connect up to 4 / 8 cameras using the coaxial cables.
2 Call Monitor Port (BNC) Connects to the Call monitor using a BNC cable.
3 Audio Input 1~2 (RCA)
Connects to the audio input devices such as microphones.
Note that the microphone with a (built-in) amplifier and
external power supply is required.
4 Main Monitor Port (VGA) Connects to the Main monitor using a VGA cable.
5 Alarm Input / Output Connects to 4 alarm inputs, and to 1 alarm output device.
6 Power Press to turn on or off the power.
7
Audio Output BNC
(4F2/8F2)
Audio Output RCA (16F2)
If it is a BNC connector, please connects to the audio output
devices, such as speakers, using the supplied BNC to RCA
Connector. Note that the speaker with a (built-in) amplifier
and external power is required.
8 Main Monitor Port (HDMI) Connects to the Main monitor using a HDMI cable.
9 LAN Connects to the Network.
10 USB Interface
Con
nects to USB storage device to copy / archive video or for
firmware upgrades. Use the other port for connecting the
mouse.
11 RS-485 Port Connects to the RS-485 device, such as EverFocus’ EKB-500
keyboard.
12 Power Port Connects to the DC 12V power using the supplied Power
Cord.
13
Audio Input 3~4 (4F2)
Audio Input 3~8 (8F2)
Audio Input 3~16 (16F2)
Connects to the audio input devices using the supplied Audio
Cable.

ECOR960 4F2 / 8F2 / 16F2
10
2. Installation
2.1 Hard Disk installation
ECOR960 4F2/8F2:
You can optionally install two 3.5” HDDs inside the ECOR960 8F2 DVR or one 3.5” HDD inside the
ECOR960 4F2 DVR for recording videos. (The HDD installation instruction uses ECOR960 8F2 DVR
as an example).
1. Make sure the DVR is power-off.
2. Unscrew the three housing screws on the back panel of the DVR.
Figure 2-1
3. Push the housing to the back and open it.
Figure 2-2
Chapter
2

ECOR960 4F2 / 8F2 / 16F2
11
4. Screw the HDD to the bottom of the DVR using supplied screws. (8CH DVR)
Figure 2-3
5. Connect the internal SATA cable to the SATA port of the HDD.
Figure 2-4
6. Connect the internal power cable to the HDD.
Figure 2-5
7. Screw back the hosing to the DVR.
8. Format the HDD after the installation is completed.