EverFocus eIVP5600 User manual

eIVP5600
Intel Gen7 Core i7-7600U/i5-7300U Mobile NVR
Supporting 8-Channel PoE IP Cameras
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: January 2020

EVERFOCUS ELECTRONICS CORPORATION
eIVP5600
Intel Gen7 Core i7-7600U/i5-7300U Mobile NVR
supporting 8-Channel PoE IP Cameras
User’s Manual
1995-2020 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
-Microsoft Windows is a registered trademark of Microsoft Corp.
-Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation
-Core, Atom are trademarks of Intel Corporation
-ITE is a trademark of Integrated Technology Express, Inc.
-IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
All other product names or trademarks are properties of their respective owners.

ii
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual
for future references.
All cautions and warnings on the device should be noted.
All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
Make sure the power source matches the power rating of the device.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
Always completely disconnect the power before working on the system’s hardware.
No connections should be made when the system is powered as a sudden rush of power
may damage sensitive electronic components.
If the device is not to be used for a long time, disconnect it from the power supply to avoid
damage by transient over-voltage.
Always disconnect this device from any AC supply before cleaning.
While cleaning, use a damp cloth instead of liquid or spray detergents.
Make sure the device is installed near a power outlet and is easily accessible.
Keep this device away from humidity.
Place the device on a solid surface during installation to prevent falls.
Do not cover the openings on the device to ensure optimal heat dissipation.
Watch out for high temperatures when the system is running.
Do not touch the heat sink or heat spreader when the system is running.
Never pour any liquid into the openings. This could cause fire or electric shock.
As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-shielded containers.
If any of the following situations arises, please contact our service personnel
([e-mail]):
-Damaged power cord or plug
-Liquid intrusion to the device
-Exposure to moisture
-Device is not working as expected or in a manner as described in this manual
-The device is dropped or damaged
-Any obvious signs of damage displayed on the device
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES
BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO
PREVENT DAMAGE.

iii
FCC Statement
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

iv
RoHS Requirements
設備名稱 (Equipment): 網路數位錄放影機，型號（型式）/ Type designation (Type): eIVP5600
單元Ｕnit 限用物質及其化學符號 Restricted substances and its chemical symbols
鉛Lead
(Pb)
汞Mercury
(Hg)
鎘Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷電路板及
電子零組件
PCB & Other
Components
○○○○○○
外部訊號連接
器及線材
Wires &
Connectors for
External
Connections
○○○○○○
外殼 Chassis ○○○○○○
中央處理器與
內存
CPU & RAM
○○○○○○
硬碟 Hard Disk ○○○○○○
電源 PSU ○○○○○○
O：表示該有毒物質在該部件所有均質材料中的含量均在SJ/T 11363-2006標準規定的限量要求以下。
The quantity of poisonous or hazardous substances or elements found in each of the component's parts is
below the SJ/T 11363-2006-stipulated requirement.
X：表示該有毒物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006標準規定的限量要求。
The quantity of poisonous or hazardous substances or elements found in at least one of the component's
parts is beyond the SJ/T 11363-2006-stipulated requirement.
備註： 一、此產品所標示之環保使用期限，係指在一般正常使用狀況下。 二、上述部件物質中央處理
器、内存、硬碟、電源為選購品。
The Environment Friendly Use Period as labeled on this product is
applicable under normal usage only

v
TABLE OF CONTENTS
1. Introduction ............................................................................................................................ 1
1.1 Features .......................................................................................................................... 1
1.2 Dimensions...................................................................................................................... 2
1.3 Packing List...................................................................................................................... 2
1.4 Front Panel...................................................................................................................... 3
1.5 Rear Panel ....................................................................................................................... 4
2. Connection and Installation.................................................................................................... 5
2.1 Storage Installation ......................................................................................................... 5
2.1.1 mSATA drive Installation............................................................................................. 5
2.1.2 2.5” SATA SSD/HDD Installation ................................................................................. 7
2.1.3 Storage Compatibility List ........................................................................................... 8
2.2 GPS Antenna Installation ................................................................................................ 9
2.3 RAM Installation............................................................................................................ 10
2.4 DC Out Cable................................................................................................................. 11
3. Jumpers and Connectors on the Motherboard .................................................................... 12
3.1 List of Jumpers .............................................................................................................. 14
3.1.1 Clear CMOS (CN10) ................................................................................................... 14
3.1.2 ATX/AT Selection (CN14) .......................................................................................... 14
3.1.3 COM1 Ring/ +5V/ +12V Selection (CN15)................................................................. 14
3.1.4 CAN Bus UART/USB Selection (CN16)....................................................................... 14
3.1.5 CAN Bus Program Firmware (CN18) ......................................................................... 15
3.2 List of Connectors ......................................................................................................... 16
3.2.1 Front Plane Connector (CN5).................................................................................... 17
3.2.2 COM4 RS-232 Serial Port Connector (COM1)........................................................... 17
3.2.3 COM3 RS-232 Serial Port Connector (COM2)........................................................... 18
3.2.4 COM1 & COM2 RS-232/422/485 Serial Port Connector (COM3)............................. 18
3.2.5 Digital I/O Connector (CN20) .................................................................................... 18
3.2.6 Power In & Remote Button (CN19)........................................................................... 19
3.2.7 CAN Bus 2.0B Connector (CN22)............................................................................... 19
3.2.8 Power on/off delay select (SW3) .............................................................................. 19
4. AMI BIOS Setup..................................................................................................................... 20
4.1 System Test and Initialization ....................................................................................... 20
4.2 AMI BIOS Setup............................................................................................................. 21
4.3 Setup Submenu: Main .................................................................................................. 21
4.4 Setup Submenu: Advanced........................................................................................... 22

vi
4.4.1 Advanced: CPU Configuration................................................................................... 22
4.4.2 Advanced: PCH-FW Configuration ............................................................................ 23
4.4.3 Advanced: SATA Drives ............................................................................................. 23
4.4.4 Advanced: Trusted Computing ................................................................................. 24
4.4.5 Advanced: Hardware Monitor .................................................................................. 25
4.4.6 Advanced: SIO Configuration.................................................................................... 25
4.4.6.1 SIO Configuration: Serial Port Configuration........................................................ 26
4.4.6.2 SIO Configuration: Serial Port 1 Configuration ..................................................... 26
4.4.6.3 SIO Configuration: Serial Port 2 Configuration ..................................................... 27
4.4.6.4 SIO Configuration: Serial Port 3 Configuration ..................................................... 28
4.4.6.5 SIO Configuration: Serial Port 4 Configuration ..................................................... 28
4.4.6.6 SIO Configuration: Serial Port 5 Configuration ..................................................... 29
4.4.6.7 SIO Configuration: Serial Port 6 Configuration ..................................................... 30
4.4.7 Advanced: Digital IO Port Configuration................................................................... 30
4.4.8 Advanced: Power Management ............................................................................... 31
4.5 Setup Submenu: Chipset............................................................................................... 32
4.5.1 Chipset: System Agent (SA) Configuration ............................................................... 32
4.5.1.1 System Agent (SA) Configuration: Graphics Configuration .................................. 33
4.6 Setup Submenu: Security.............................................................................................. 34
4.7 Setup Submenu: Boot ................................................................................................... 35
4.8 Setup submenu: Save & Exit ......................................................................................... 35
5. Specification.......................................................................................................................... 36

eIVP5600 AI Mobile NVR
1
1. Introduction
The eIVP5600 is one of EverFocus’ eIVP series AI mobile NVRs adopting Intel® 7th Gen. Core™ i5/i7
Processor and Movidius™ Myriad™ X AI core module.
The model supports up to 8 PoE ports with individual LAN chips. Featuring smart PoE functionality,
the eIVP5600 can remotely check or reboot the connected PoE devices if any of the PoE devices
are not working properly.
The eIVP5600 also supports wide operating temperature ranging from -20°C to 70°C and wide DC
range of DC 10-36V. It also features comprehensive storage options including up to two 2.5”
HDD/SSD bays (optional) and an mSATA slot, and 2 RS-232/422/485 ports for connecting to other
devices.
The eIVP5600 is complied with the MIL-STD-810G standard for the utmost viability for vehicular
use. It supports onboard GPS, GLONASS and CAN bus. Besides, the model is also CE, FCC and RoHS
certified. The eIVP5600 AI mobile NVR carries everything you need for computing on the road.
eIVP5600 Model SKU
SKU1: eIVP5600-i5 (i5-7300U; PoE x 4)
SKU2: eIVP5600-i5 (i5-7300U; PoE x 8)
SKU3: eIVP5600-i7 (i7-7600U; PoE x 4)
SKU4: eIVP5600-i7 (i7-7600U; PoE x 8)
1.1 Features
•In-vehicle network video recorder platform
•Intel® 7th Gen. Core™ i5/i7 processor
•260-pin DDR4 2133 MHz SODIMM x 2, total up to 32GB (optional)
•Intel® Integrated Graphics Engine supports 2 display outputs by HDMI x 1, DP x 1
•Realtek® Ethernet x 10 ports (PoE x 8, GbE x 2)
•Supports up to 8-channel IP cameras
•Intel Movidius AI core module (optional)
•Supports CAN Bus 2.0B (optional)
•CE, FCC, RoHS certified
Chapter
1

eIVP5600 AI Mobile NVR
2
1.2 Dimensions
205mm / 8.1"
248.6mm / 9.79"
70mm / 2.76"
73.9mm / 2.91"
174mm / 6.85"
187.1mm / 7.37"
1.3 Packing List
•NVR x 1
•DC Power Terminal Block x 1
•DC Out Cable x 1 (power supply for
cameras)
•mSATA Screw x 1
•2.5” SATA SSD Installation Kit x 1 (includes 4
screws, 1 SATA cable, 1 SSD power cable)
• CD x 1 (see Note 3)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. The CD contains the User Manual and some Drivers for the system. If you can’t find the
required drivers from the CD, please go to our website for related
drivers. www.everfocus.com.tw

eIVP5600 AI Mobile NVR
3
1.4 Front Panel
124
3568
27
No. Name Description
1 Power Button Press the button to turn on or turn off the system.
2 Antenna Connects the antenna to the mobile NVR for 3G / 4G / WiFi functions.
3 LED Indicator
HDD: When storage is reading/writing data, the LED will flashes green.
Wireless 1-3: Mini Card WLED (Slot1 w/LED1, Slot2 w/LED2, Slot3
w/LED3.
4 DP Port DP display output.
5 PoE Ports LAN3~8 with PoE function for connecting to the IP cameras.
6 USB3.0 Ports USB3.0 ports.
7 Reset Press the button to restart the system.
8 LAN/WAN Two 10/100/1000 Base-Tx Ethernet ports for connecting to the
network.

eIVP5600 AI Mobile NVR
4
1.5 Rear Panel
11
234567
910 11
812
No. Name Description
1 Antenna Connects the antenna to the mobile NVR for 3G / 4G / WiFi functions.
2 CAN Bus CAN Bus 2.0B Connector.
3 SIM Card Slot SIM Card slots.
4 HDMI Port HDMI display output.
5 COM Ports RS-232 ports.
6 Power Output
A total of 12VDC, 2A power supply to the connected cameras. Please refer
to 2.2 DC Power Out Cable.
7 Digital IO Digital IO connector.
8 Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
9 Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
10 Fuse Fuse Connector.
11 Power Input Insert the supplied DC Power Terminal Block and then connect the
system to a DC 10-36V power source.
12 Remote Power Remote button.

eIVP5600 AI Mobile NVR
5
2. Connection and Installation
2.1 Storage Installation
The eIVP5600 supports mSATA and 2.5” SATA SSD for storage.
2.1.1 mSATA drive Installation
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover.
3. Unscrew the 6 screws.
Chapter
2

eIVP5600 AI Mobile NVR
6
4. Lift up the case to remove the top cover.
5. Turn the case to the other side and find the mSATA interface on the motherboard. Screw
your mSATA drive to the mSATA Interface using the supplied mSATA Screw.
mSATA Interface
6. Screw back the top cover and bottom cover.

eIVP5600 AI Mobile NVR
7
2.1.2 2.5” SATA SSD/HDD Installation
You can install one 2.5” SATA SSD/HDD inside the NVR.
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover from the
housing.
3. Turn the bottom cover to the other side. Place an 2.5” SATA SSD onto the inner side of the
bottom cover, align the SSD screw holes, and then use the supplied 4 screws to screw the
SSD to the bottom cover from the outside of the bottom cover.
2.5" SATA SSD
Inner side of the Bottom Cover
4. Connect one end of the supplied SATA cable and SSD power cable to the motherboard.
SATA Cable
SSD Power Cable

eIVP5600 AI Mobile NVR
8
5. Connect the other end of the SATA cable and SSD power cable to the SSD.
SSD Power Cable
SATA Cable
6. Screw the bottom cover back to the housing.
2.1.3 Storage Compatibility List
Please go to the product page (Download) on EverFocus’ Website www.everfocus.com.tw to see
the latest Storage Compatibility List. It’s recommended to use the storage models listed on the
Storage Compatibility List to ensure your storage devices are compatible.

eIVP5600 AI Mobile NVR
9
2.2 GPS Antenna Installation
The eIVP5600 supports onboard GPS. To enable the GPS function, connect a GPS Antenna to the
antenna port.
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover.
3. Find the GPS connector on the motherboard. Connect one end of the RF cable to the GPS
connector and the other end to the Antenna port.
GPS Connector Antenna Port
4. Screw the GPS antenna to the Antenna port.
5. Screw the bottom cover back to the model.

eIVP5600 AI Mobile NVR
10
2.3 RAM Installation
The eIVP5600 supports 260-pin DDR4 2133 MHz SODIMM x 2. You can install the RAM on the
DIMM port of the motherboard.
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover.
3. Find the DIMM port on the motherboard and install the RAM.
4. The second DIMM port is on the other side of the motherboard. To use the second DIMM
port, follow Step 3and Step 4 in 2.1 Storage Installation to remove the Top Cover from the
model and turn the motherboard to the other side.
5. Screw back the front cover and bottom cover to the model.

eIVP5600 AI Mobile NVR
11
2.4 DC Out Cable
The eIVP5600 provides a total of 12V/2A DC output with four sets of power output wires (+/-)
for the connected IP cameras.
Connect the supplied DC Out Cable to the DC Out port on the rear panel of the NVR.
+ (Red)
- (Black)

eIVP5600 AI Mobile NVR
12
3. Jumpers and Connectors on the Motherboard
Users can use the jumpers and connectors to configure different applications.
Component Side
Chapter
3

eIVP5600 AI Mobile NVR
13
Solder Side