evertz 7882J2KX-IPASI User manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
User Manual
© Copyright 2017
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario,
Canada L7L 5Z9
Phone: [phone]
Sales: [email protected] Fax: [phone]
Tech Support: [email protected] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, March 2017
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 7882J2KX-IPASI series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 7882J2KX-IPASI series product. Due to on going research and development, features and specifications in this manual are
subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS
APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Revision 1.0 Page - i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. SPECIFICATIONS.........................................................................................................................3
2.1. SERIAL VIDEO INPUT SPECIFICATIONS...........................................................................3
2.2. VIDEO ASI OUTPUT STANDARDS .....................................................................................3
2.3. ETHERNET:..........................................................................................................................3
2.4. COMPRESSION AND ENCAPSULATION SPECIFICATIONS.............................................3
2.5. AUDIO SPECIFICATIONS....................................................................................................3
2.6. CONFIGURATION & MGMT.................................................................................................4
2.7. ELECTRICAL .......................................................................................................................4
2.8. PHYSICAL (NUMBER OF SLOTS) ......................................................................................4
3. GETTING STARTED.....................................................................................................................5
3.1. CONNECTING TO AN ETHERNET NETWORK...................................................................6
3.1.1. Ethernet Connection for the Control Port ...................................................................6
3.2. CARE AND HANDLING OF OPTICAL FIBER WHEN USING SFP MODULES ...................7
3.2.1. Handling and Connecting Fibers................................................................................7
3.3. HARDWARE INSTALLATION..............................................................................................8
3.3.1. Three Different Ways to Control and Configure the 7882J2KX-IPASI........................8
3.3.2. Module Installation.....................................................................................................8
3.3.3. Control Port Configurations for the 7882J2KX-IPASI .................................................9
4. WEB INTERFACE.......................................................................................................................11
4.1. SYTEM TAB .......................................................................................................................12
4.2. PRODUCT FEATURES TAB..............................................................................................15
4.3. DECODER CONTROL TAB ...............................................................................................16
4.4. DECODER AUDIO CONTROL TAB ...................................................................................19
4.5. DECODER MONITOR TAB ................................................................................................20
4.6. INPUT AUDIO PROC CONTROL TAB...............................................................................21
4.7. ENCODERS CONTROL TAB.............................................................................................22
4.8. ENCODERS MONITOR TAB..............................................................................................25
4.9. PRESET TAB .....................................................................................................................26
4.10. SYSTEM NOTIFY TAB.......................................................................................................27
4.11. ENCODER NOTIFY TAB....................................................................................................28
4.12. DECODER NOTIFY TAB....................................................................................................29
5. VISTALINK®PRO INTERFACE ..................................................................................................31

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Page - ii Revision 1.0
5.1. SYSTEM TAB ....................................................................................................................32
5.2. PRODUCT FEATURES......................................................................................................35
5.3. DECODER CONTROL.......................................................................................................37
5.4. DECODER AUDIO CONTROL TAB ..................................................................................40
5.5. DECODER MONITOR TAB................................................................................................41
5.6. INPUT AUDIO PROC CONTROL.......................................................................................43
5.7. ENCODERS CONTROL TAB ............................................................................................44
5.8. ENCODERS MONITOR TAB .............................................................................................46
5.9. PRESET TAB.....................................................................................................................47
5.10. SYSTEM NOTIFY TAB ......................................................................................................48
5.11. ENCODER NOTIFY TAB ...................................................................................................49
5.12. DECODERS NOTIFY TAB.................................................................................................50
6. UPGRADE PROCEDURES ........................................................................................................53
6.1. UPDATING VLPRO SERVER JAR FILE ...........................................................................53
6.2. FIRMWARE UPGRADE.....................................................................................................55
6.3. FIRMWARE UPGRADE USING WEBEASY®....................................................................55
6.4. FIRMWARE UPGRADE USING VISTALINK®....................................................................57

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Revision 1.0 Page - iii
Figures
Figure 1-1 : 7882J2KX-IPASI Encoder Block Diagram....................................................................................2
Figure 1-2 : 7882J2KX-IPASI Decoder Block Diagram....................................................................................2
Figure 3-1 : 7882J2KX-IPASI Rear Plate.........................................................................................................5
Figure 3-2 : RJ-45 Connector Pin-Out Locations.............................................................................................6
Figure 3-3 : 7800 Chassis ................................................................................................................................8
Figure 3-4 : COM Port – Serial Port Settings ...................................................................................................9
Figure 3-5 : COM Port - Main Menu.................................................................................................................9
Figure 3-6 : COM Port – Network Settings....................................................................................................10
Figure 4-1 : WebEASY®– Login Menu...........................................................................................................11
Figure 4-2 : WebEASY®– System Tab Part 1 ...............................................................................................12
Figure 4-3 : WebEASY®– System Tab Part 2 ...............................................................................................14
Figure 4-4 : WebEASY®- Product Features Tab...........................................................................................15
Figure 4-5 : WebEASY®- Decoder Control Tab - Part 1................................................................................16
Figure 4-6 : WebEASY®– Decoder Control Tab - Part 2...............................................................................18
Figure 4-7 : WebEASY®– Decoder Audio Control Tab.................................................................................19
Figure 4-8 : WebEASY®– Decoder Monitor Tab ...........................................................................................20
Figure 4-9 : WebEASY®– Input Audio Proc Control Tab...............................................................................21
Figure 4-10 : WebEASY®– Encoders Control Tab - Part 1 ...........................................................................22
Figure 4-11 : WebEASY®– Encoders Control Tab - Part 2 ............................................................................24
Figure 4-12 : WebEASY®– Encoders Monitor Tab........................................................................................25
Figure 4-13 : WebEASY®– Preset Tab..........................................................................................................26
Figure 4-14 : WebEASY®– System Notify Tab..............................................................................................27
Figure 4-15 : WebEASY®– Encoder Notify Tab ............................................................................................28
Figure 4-16 : WebEASY®- Decoder Notify Tab.............................................................................................29
Figure 5-1 : VistaLINK® - System Tab Part 1..................................................................................................32
Figure 5-2 : VistaLINK® - System Tab Part 2..................................................................................................34
Figure 5-3 : VistaLINK® - Product Features Tab.............................................................................................35
Figure 5-4 : VistaLINK® - Decoder Control Tab (Part 1).................................................................................37
Figure 5-5 : VistaLINK® - Decoder Control Tab (Part 2).................................................................................39
Figure 5-6 : VistaLINK® - Decoder Audio Control Tab....................................................................................40
Figure 5-7 : VistaLINK® - Decoder Monitor Tab..............................................................................................41
Figure 5-8 : VistaLINK® - Input Audio Proc Control Tab.................................................................................43
Figure 5-9 : VistaLINK® - Encoders Control Tab Part 1..................................................................................44
Figure 5-10 : VistaLINK® - Encoders Control Tab Part 2................................................................................45
Figure 5-11 : VistaLINK® - Encoder Monitor Tab............................................................................................46
Figure 5-12: VistaLINK® - Preset Tab Part 1..................................................................................................47
Figure 5-13 : VistaLINK® - System Notify Tab................................................................................................48
Figure 5-14: VistaLINK® - Encoder Notify Tab................................................................................................49
Figure 5-15: VistaLINK® - Decoder Notify Tab ...............................................................................................50
Figure 6-1 : VistaLINK®PRO Server..............................................................................................................53
Figure 6-2 : VistaLINK®PRO – Applying JAR Updates .................................................................................54
Figure 6-3 : WebEASY® - Upgrade Button on Top Menu Bar ........................................................................55
Figure 6-4 : WebEASY® - Firmware Upgrade Menu .....................................................................................56
Figure 6-5 : WebEASY® - Firmware Upgrade Menu.......................................................................................56
Figure 6-6 : VistaLINK®- Selecting Version Information................................................................................57
Figure 6-7 : VistaLINK®- Selecting Card for Upgrade ...................................................................................58
Figure 6-8 : Selecting File for Firmware Upgrade ..........................................................................................58
Tables
Table 3-1 : 10BaseT and 100BaseT Straight Through Wiring Connections....................................................6
Table 3-2 : 1000BaseT Straight Through Wiring Connections.........................................................................7

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Page - iv Revision 1.0
This page left intentionally blank

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Revision 1.0 Page - v
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Mar 2017
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof
nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Page - vi Revision 1.0
This page left intentionally blank