evertz 5782DEC User manual

5782DEC
Professional H.264 and MPEG-2 Decoder
User Manual
© Copyright 2016
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, December 2016
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 5782DEC series products. Evertz Microsystems expressly
prohibits the use of this manual for any purpose other than the operation of the 5782DEC series products. Due to
on going research and development, features and specifications in this manual are subject to change without
notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of
Evertz Microsystems Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz
Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to the European Union EMC directive. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface
cables with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste. Contact
your Local Authority for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

5782DEC
Professional H.264 and MPEG-2 Decoder
Revision 1.0 Page i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 Initial Release Dec 2016
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

5782DEC
Professional H.264 and MPEG-2 Decoder
Page ii Revision 1.0
This page left intentionally blank

5782DEC
Professional H.264 and MPEG-2 Decoder
Revision 1.0 Page iii
TABLE OF CONTENTS
1. OVERVIEW...................................................................................................................................1
2. GETTING STARTED.....................................................................................................................3
2.1. CONNECTIONS ...................................................................................................................3
2.2. HARDWARE INSTALLATION..............................................................................................3
2.2.1. Network Settings for VLPRO – 5782DEC..................................................................4
3. TECHNICAL SPECIFICATIONS...................................................................................................7
3.1. VIDEO SPECIFICATIONS....................................................................................................7
3.2. AUDIO SPECIFICATIONS....................................................................................................7
3.3. ANCILLIARY SPECIFICATIONS..........................................................................................7
3.4. HIGH QUALITY DOWN CONVERT (+HDC).........................................................................7
3.5. CONFIGURATION & MGMT ................................................................................................8
3.6. ELECTRICAL.......................................................................................................................8
3.7. PHYSICAL (NUMBER OF SLOTS) ......................................................................................8
4. VISTALINK®PRO INTERFACE....................................................................................................9
4.1. SYSTEM TAB.......................................................................................................................9
4.2. PRODUCT FEATURES......................................................................................................11
4.3. INPUT CONTROL ..............................................................................................................12
4.4. DECODER MONITOR........................................................................................................16
4.5. DECODER AUDIO MONITOR............................................................................................18
4.6. OUTPUT CONTROL...........................................................................................................19
4.7. ANC DATA CONTROL.......................................................................................................20
4.8. ANC MONITOR..................................................................................................................21
4.9. INPUT FAULTS..................................................................................................................22
4.10. SFP-ASI TRANSMIT ..........................................................................................................23
4.11. INBAND CONTROL ...........................................................................................................24
5. WEB INTERFACE.......................................................................................................................27
5.1. SYSTEM.............................................................................................................................28
5.2. PRODUCT FEATURES......................................................................................................30
5.3. DECODER INPUT CONTROL............................................................................................31
5.4. DECODER MONITOR........................................................................................................35

5782DEC
Professional H.264 and MPEG-2 Decoder
Page iv Revision 1.0
5.5. DECODER AUDIO MONITOR............................................................................................36
5.6. DECODER OUTPUT CONTROL........................................................................................37
5.7. DECODER ANC DATA CONTROL....................................................................................38
5.8. DECODER ANC MONITOR ...............................................................................................40
5.9. SFP-ASI TRANSMIT CONTROL........................................................................................41
5.10. INBAND CONTROL ...........................................................................................................42
5.11. FAULTS .............................................................................................................................43
6. UPGRADE PROCEDURES.........................................................................................................45
6.1. UPDATING VISTALINK PRO SERVER JAR FILE.............................................................45
6.2. FIRMWARE UPGRADE .....................................................................................................47
6.2.1. Firmware Upgrade Using WebEASY®.....................................................................47
6.2.2. Firmware Upgrade using VistaLINK®with the 570FC..............................................50

5782DEC
Professional H.264 and MPEG-2 Decoder
Revision 1.0 Page v
Figures
Figure 1-1: 5782DEC Block Diagram ...............................................................................................................2
Figure 2-1: 5782DEC-H264HD-IPASI Rear Plate ............................................................................................3
Figure 2-2: 5782DEC COM Login and Main Menu...........................................................................................4
Figure 2-3: 5782DEC COM Network Setup......................................................................................................5
Figure 4-1: VistaLINK® – System Tab...............................................................................................................9
Figure 4-3: VistaLINK® – Product Features Tab.............................................................................................11
Figure 4-4: VistaLINK® – Input Control Tab....................................................................................................12
Figure 4-5: VistaLINK® – Input Control Tab continued ...................................................................................15
Figure 4-6: VistaLINK® – Decoder Monitor Tab..............................................................................................16
Figure 4-7: VistaLINK® – Decoder Audio Monitor Tab....................................................................................18
Figure 4-8: VistaLINK® – Output Control Tab .................................................................................................19
Figure 4-9: VistaLINK® – ANC Data Control Tab............................................................................................20
Figure 4-10: VistaLINK® – ANC Monitor Tab..................................................................................................21
Figure 4-11: VistaLINK® – Input Faults Tab....................................................................................................22
Figure 4-12: VistaLINK® – SFP-ASI Transmit Tab..........................................................................................23
Figure 4-13: VistaLINK® – Inband Control Tab...............................................................................................24
Figure 5-1: WebEASY®– Login Menu............................................................................................................27
Figure 5-2: WebEASY®– System Tab............................................................................................................28
Figure 5-3: WebEASY®– System Tab continued...........................................................................................29
Figure 5-4: WebEASY®– Product Features Tab............................................................................................30
Figure 5-5: WebEASY®– Decoder Input Control Tab....................................................................................31
Figure 5-6: WebEASY®– Decoder Input Control Tab continued ...................................................................33
Figure 5-7: WebEASY®– Decoder Monitor Tab.............................................................................................35
Figure 5-8: WebEASY®– Decoder Audio Monitor Tab...................................................................................36
Figure 5-9: WebEASY®– Decoder Output Control Tab .................................................................................37
Figure 5-10: WebEASY®– Decoder ANC Data Control Tab..........................................................................38
Figure 5-11: WebEASY®– Decoder ANC Monitor Tab..................................................................................40
Figure 5-12: WebEASY®– SFP Transmit Control Tab...................................................................................41
Figure 5-13: WebEASY®– Inband Control Tab..............................................................................................42
Figure 5-14: WebEASY®– Faults Tab............................................................................................................43
Figure 6-1: VistaLINK® PRO Server Help Menu .............................................................................................45
Figure 6-2: VistaLINK® PRO – Applying JAR Updates...................................................................................46
Figure 6-3: WebEASY® – Upgrade Button on Top Menu Bar.........................................................................47
Figure 6-4: WebEASY®– Firmware Upgrade Menu.......................................................................................48
Figure 6-5: WebEASY® – Locating the Image File..........................................................................................49
Figure 6-6: VistaLINK®- Selecting Version Information .................................................................................50

5782DEC
Professional H.264 and MPEG-2 Decoder
Page vi Revision 1.0
This page left intentionally blank

5782DEC
Professional H.264 and MPEG-2 Decoder
OVERVIEW Revision 1.0 Page - 1
1. OVERVIEW
The 5782DEC is a professional high quality 3G/HD/SD-SDI H.264/MPEG-2 decoder platform. It offers
high end decoding support for both MPEG-2 and H.264/AVC optionally up to 4:2:2 10-bit.
The 5782DEC is perfect for monitoring applications or decoding for downstream baseband video and
audio processing.
The 5782DEC can reconstruct in the most flexible way all VANC & HANC data in the baseband
outputs.
The 5782DEC can be integrated in the Evertz 7881IRD-H264HD-LB platform to create a highly flexible
demodulating and decoding DVB-S/S2 satellite receiver.
Features & Benefits
•1x H.264/MPEG-2 Video Decoder up to 4:2:2 10-bit
•2x ASI and IP inputs
•2x 3G/HD/SD-SDI outputs
•Selection of decoded service
•Baseband outputs with embedded audio and ancillary data
•Fully integrated with the industry leading VistaLINK® PRO system
•Control via 570 Frame Controller or integrated HTTP interface

5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 2 Revision 1.0 OVERVIEW
Figure 1-1: 5782DEC Block Diagram

5782DEC
Professional H.264 and MPEG-2 Decoder
GETTING STARTED Revision 1.0 Page - 3
2. GETTING STARTED
The 5782DEC module comes with a rear plate that occupies one slot in a frame.
Figure 2-1: 5782DEC-H264HD-IPASI Rear Plate
2.1. CONNECTIONS
IN 1-2: BNC connectors used to input ASI MPEG2 Transport Streams.
OUT 1-2: Two BNC connectors with re-clocked serial component video outputs, compatible
with the SMPTE 259M, SMPTE 292M, and SMPTE 424M (+3G) standards. OUT 2
can be additionally configured for ASI output from IP or the down-converted SD-SDI
output (HDC).
DATA 1-2: Two SFP cages for streaming Transport Stream data. SFPTR-RJ45-SGM-AV sold
separately.
2.2. HARDWARE INSTALLATION
To successfully install the 5782DEC, you will require:
1. An unused IP address on the network
2. An Evertz serial cable
3. VLPro Server IP address
Before handling the card it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn. Locate on a frame chassis a vacant slot. Unpack
the 5782DEC and separate the rear panel from the main card. Locate the slot on the rear of the rack
and remove the blanking panel. Insert the rear panel into the back of the chassis and secure using the
two screws provided.
Before inserting the front card, connect the serial cable to the board using the serial cable provided.
Now insert the 5782DEC card into the corresponding front slot ensuring the card lines up with the slot
runners on the bottom and the top of the chassis. Push the card into the slot ensuring that when it
mates with the rear panel is has been firmly pushed into a seated position. This can be confirmed when
the connectivity lights for the Ethernet port are illuminated. Do not connect the HD/SDI Input cable to
the rear card until the initial configuration has been completed (failure to do this could cause unwanted
network issues).

5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 4 Revision 1.0 GETTING STARTED
2.2.1. Network Settings for VLPRO – 5782DEC
1. Connect the Evertz serial upgrade cable (ribbon cable) to the 2x3 header at the front edge of
the 5782DEC.
2. Start a terminal program and configure the port settings.
3. At the “netra-platform login” prompt, enter:
•“customer” for username <Enter>
•“customer” for password <Enter>
Figure 2-2: 5782DEC COM Login and Main Menu

5782DEC
Professional H.264 and MPEG-2 Decoder
GETTING STARTED Revision 1.0 Page - 5
4. From the main menu, four selections are available. Select Network Setup and the menu
illustrated below will appear. Set the desired network addresses per your requirement. After
entering all settings choose Exit two times to get back to the login prompt. The card must be
rebooted for all the network settings to take effect.
Figure 2-3: 5782DEC COM Network Setup

5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 6 Revision 1.0 GETTING STARTED
This page left intentionally blank

5782DEC
Professional H.264 and MPEG-2 Decoder
TECHNICAL SPECIFICATIONS Revision 1.0 Page - 7
3. TECHNICAL SPECIFICATIONS
3.1. VIDEO SPECIFICATIONS
• Number of Inputs/Outputs:
BNC: 2x ASI Inputs
2x 3G/HD/SD/ASI Outputs
IP: 2x GbE Data Ports (Optional SFP)
• Standard: SMPTE 425M/292M/259M
3Gb/s, 1.485Gb/s, 270Mb/s
ASI per DVB TR 101 891 (Max 213Mb/s)
Max Program BR – 80Mb/s
Max PIDs per Program – 50
Max Programs per TS – 50
• Video Resolution: 1920x1080 @ 25, 29.97, 30, 59.94 and 60Hz
1280x720 @ 50, 59.94 and 60Hz
720x576 @ 25Hz (ITU-R BT.656-4)
720x480 @ 29.97Hz (SMPTE 125M)
• Video Decompression: H.264/MPEG-2 4:2:0
H.264/MPEG-2 4:2:0 8bit (Optional)
H.264 4:2:2 10 bit (Optional)
• Profile/Level: MP@ML up to Hi422P@4.1
3.2. AUDIO SPECIFICATIONS
• Number of Channels: 8x PIDs of audio processing across 16x Channels of Embedded
PCM
• Compression Formats: MPEG-1 Layer 2
Dolby Digital AC-3 up to 3/2L
Passthrough
PCM
Dolby Digital
Dolby-E
• Optional: Dolby-E Decode
AAC-LC
3.3. ANCILLIARY SPECIFICATIONS
• Embedding of: Audio Pass Through
Closed Caption/Teletext
SCTE35 to 104 (optional)
AFD/WSS
Timecode
3.4. HIGH QUALITY DOWN CONVERT (+HDC)
• Down Conversion: SMPTE 292 to SMPTE 259
• Aspect Ratio: Fixed Scalar or Follow AFD

5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 8 Revision 1.0 TECHNICAL SPECIFICATIONS
3.5. CONFIGURATION & MGMT
• Web Server: Integrated HTTP with full control
• SNMP: VistaLINK remote control and monitoring via Frame Controller
3.6. ELECTRICAL
• Input Voltage: Auto ranging 100 – 240VAC
• Power: <48W
• EMI/RFI: Complies with FCC regulations for class-A devices
Complies with EU EMC directive
3.7. PHYSICAL (NUMBER OF SLOTS)
• 570FR: 1

5782DEC
Professional H.264 and MPEG-2 Decoder
VLPRO INTERFACE Revision 1.0 Page - 9
4. VISTALINK®PRO INTERFACE
This chapter assumes that the VistaLINK®PRO server and client are already configured for your
network and you have basic knowledge of the VistaLINK®PRO interface. It also assumes that the user
or network administrator had already added the appropriate JAR file to the server, and both the client
and server applications have been restarted.
There are two methods that can be used to communicate with the 5782DEC and VistaLINK®PRO.
1. 570FC Frame Controller and 5782DEC with appropriate JAR file. Ethernet connection is made
to the 570FC control port from VistaLINK®PRO.
Open VistaLINK®PRO and click on the refresh tree icon. Expand the hardware tree by clicking
on the “+” button on the IP address of the frame controller’s port. The 570FC should show up
and the number of 5782DEC cards installed after it in the tree formation.
2. Using the 570FC control port and WebEASY UI for direct web access control (discussed
further in Section 5).
Open VistaLINK®PRO and click on the refresh tree icon. Select 5782DEC and right click to View
Configuration….
4.1. SYSTEM TAB
Figure 4-1: VistaLINK® – System Tab
Decoder Control
Decoder Reset: This control allows the user to reset the decoder.

5782DEC
Professional H.264 and MPEG-2 Decoder
Page - 10 Revision 1.0 VLPRO INTERFACE
Decoder Reboot: This control allows the user to power cycle the decoder.
Load Factory Configuration: This control allows the user to soft reset the decoder to the factory
settings.
Control Port: Currently unused on 5782DEC platform.
Data Port <1,2> Control
IP Address: This control allows the user to set the IP address on the Data Port. This control will also
display the currently set IP address.
Netmask: This control allows the user to set the Netmask for the Data Port IP address. This control
will also display the currently set Netmask.
Gateway: This control allows the user to set the Gateway for the Data Port. This control will also
display the currently set Gateway.
Data Port <1,2> Monitor
SFP Part Number: This parameter returns the part number of the SFP located in the Data Port.
Port Link Status: This parameter returns the link status for the data port, communicating to the user
whether the link is up or down.
Port Link Info: This parameter returns the link status for the data port, containing information about
speed and duplex.
Receive Bandwidth: When the link is Up, this parameter returns the receive bandwidth currently
being read on the Data Port. Reading is in kbps.
Transmit Bandwidth: When the link is Up, this parameter returns the transmit bandwidth currently
being sent on the Data Port. Reading is in kbps.
Syslog Configuration
Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP,
sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for
constant monitoring of the device activity.
External Syslog: This parameter allows the user to enable or disable sending syslog information to
the configured external server.
Syslog Server IP: This parameter allows the user to assign the external syslog server IP address.
This will be the address of a PC with the syslog server software installed (e.g. Kiwi Syslog Server).
Temperature
Temperature Monitor: This displays the temperature of the module.