evertz 3406FR-HDBNC User manual

3406FR-HDBNC
Fiber Optic SFP HD-BNC Frame
User Manual
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario, Canada
L7L 5Z9
Phone: [phone]
Sales Fax: [phone]
Tech Support Phone: [phone]
Tech Support Fax: [phone]
Sales: [e-mail]
Tech Support: [e-mail]
Web Page: http://www.evertz.com
Version 1.0, October 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended
solely for the use of purchasers of the 3406FR Series. Evertz Microsystems expressly prohibits the use of this manual
for any purpose other than the operation of the device.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated “Dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (Servicing) instructions in
the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCON
NECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT
THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

FIBER OPTIC DEVICES
Some modules in this product may have fiber optic outputs. The following safety information applies to the
optical outputs of these modules. Consult individual chapters for specific safety information for handling
fiber optics.
WARNING
CAUTION – CLASS 1 VISIBLE & INVISIBLE LASER RADIATION WHEN OPEN
DO NOT VIEW DIRECTLY OR WITH OPTICAL INSTRUMENTS.
ELECTROSTATIC SENSITIVE DEVICES
The hand symbol within an equilateral triangle is intended to alert the user
to instructions related to precautions for handling electrostatic-sensitive
devices. See “Electro Static Discharge (ESD) Precautions” section for
further details.

INFORMATION FOR NEBS COMPLIANT VERSIONS
The intra-building port(s) of this equipment is suitable for connection to intra-
building or unexposed wiring or cabling only. The intra-building port(s) of the
equipment MUST NOT be metallically connected to interfaces that connect
to the OSP or its wiring. These interfaces are designed for use as intra-
building interfaces only (Type 2 or Type 4 ports as described in GR-1089-
CORE, Issue 4) and require isolation from the exposed OSP cabling. The
addition of Primary Protectors is not sufficient protection in order to connect
these interfaces metallically to OSP wiring.
The intra-building port(s) of the equipment or subassembly must use
shielded intra-building cabling/wiring that is grounded at both ends.
This equipment is to be connected to a Common Bonding Network. See
Installation section for further information.

This equipment is to be installed in the network telecommunication facilities.

To ensure that radiated emissions do not exceed NEBS requirements, all
Ethernet (Cat-5 or better) connections must use shielded cable.
The use of unshielded Ethernet cable may cause excessive electromagnetic
radiation in excess of NEBS specifications.

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60950 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to the
European Union EMC directive. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to
operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded
interface cables with the shield connect
EN60950
Safety
EN504192 2005
Waste electrical products should not
be disposed of with household
waste. Contact your Local Authority
for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity
Evertz Microsystems Ltd This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may cause harmful interference, and this device must
accept any interference received, including interference that may
cause undesired operation.
Tested to comply
with FCC
Standards
For Commercial Use

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0
First Release
October 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof or for
the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Page -ii Revision1.0
This page left intentionally blank

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - iii
TABLE OF CONTENTS
1. OVERVIEW.....................................................................................................................................1
3406FR-BNC FRAME .........................................................................................................1
2. TECHNICAL SPECIFICATIONS.....................................................................................................3
3406FR-HDBNC FRAME ....................................................................................................3
COMMUNICATION AND CONTROL ..................................................................................3
OPTICAL OUTPUT .............................................................................................................3
OPTICAL INPUT.................................................................................................................3
ELECTRICAL INPUTS........................................................................................................3
ELECTRICAL OUTPUTS....................................................................................................4
PHYSICAL ..........................................................................................................................4
COMPLIANCE ....................................................................................................................4
3. INSTALLATION..............................................................................................................................5
FAN INSTALLATION AND REMOVAL (3406FAN) ............................................................5
3.1.1. Cooling ....................................................................................................................5
CARE AND HANDLING OF OPTICAL FIBER....................................................................6
3.2.1. Safety ......................................................................................................................6
3.2.2. Assembly .................................................................................................................6
3.2.3. Labeling ...................................................................................................................7
3.2.4. Handling and Connecting Fibers ..............................................................................7
FIBER INPUT AND OUTPUT CONNECTIONS...................................................................7
3.3.1. Electro Static Discharge (ESD) Precautions.............................................................9
3.3.2. 3406FR-HDBNC SFP Module Variants..................................................................10
3.3.3. Installing an SFP Module .......................................................................................11
3.3.4. Removing an SFP Module .....................................................................................11
ELECTRICAL INPUT AND OUTPUT CONNECTIONS .....................................................12
3.4.1. Rear Panel HD-BNC Connections..........................................................................12
SERVICING INSTRUCTIONS ...........................................................................................12
CHANGING THE FUSES ..................................................................................................12
4. STATUS AND LEDS ....................................................................................................................13
STATUS LED....................................................................................................................13
5. WEBEASY®CONFIGURATION ...................................................................................................15
SYSTEM ...........................................................................................................................16
NETWORK MANAGEMENT .............................................................................................17
FRAME MANAGEMENT...................................................................................................17

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Page -iv Revision1.0
SFP ...................................................................................................................................18
5.4.1. SFP – 3406T-2-12G............................................................................................... 19
5.4.2. SFP - 3406R-DA4R-12G........................................................................................19
5.4.3. SFP – 3406R-2-12G ..............................................................................................20
NOTIFY .............................................................................................................................21
6. 3406 SERIES CWDM PASSIVE OPTICAL MODULES ................................................................23
OVERVIEW .......................................................................................................................23
6.1.1. 3406CWDM Coarse Wavelength Division Multiplexor ............................................ 23
INSTALLATION ................................................................................................................24

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - v
Figures
Figure 1-1: 3406FR-HDBNC Frame .......................................................................................................1
Figure 1-2: 3406FR-HDBNC Block Diagram ..........................................................................................2
Figure 3-1: External Views of 3406FR-HDBNC ......................................................................................5
Figure 3-3: Front View of 3406FAN........................................................................................................5
Figure 3-4: Cooling Fan Installation and Removal..................................................................................6
Figure 3-5: Reproduction of Laser Certification and Identification Label.................................................7
Figure 3-6: 3406FR-HDBNC Front View with Fiber Inputs and Outputs .................................................8
Figure 3-7: Evertz®SFP Modules...........................................................................................................8
Figure 3-8: 3406FR-HDBNC SFP Module Variants..............................................................................10
Figure 3-9: 3406FR-HDBNC Fixed Electrical Connections...................................................................12
Figure 4-1: Front of 3406FC.................................................................................................................13
Figure 5-1: WEBEasy®- Navigation Bar ...............................................................................................15
Figure 5-2: WebEasy®- System ...........................................................................................................16
Figure 5-3: WEBEasy®- Network Management ...................................................................................17
Figure 5-4: WEBEasy®- Frame Management ......................................................................................17
Figure 5-5: WEBEasy®- SFP...............................................................................................................18
Figure 5-6: WEBEasy®- SFP – 3406T-2-12G ......................................................................................19
Figure 5-7: WEBEasy®- SFP - 3406R-DA4R-12G...............................................................................19
Figure 5-8: WebEasy®- SFP - 3406R-2-12G .......................................................................................20
Figure 5-9: WebEasy®- Notify..............................................................................................................21

3406 Frame Manual
3406FR-HDBNC Fiber Optic SFP HD-BNC Frame
Page -vi Revision1.0
Page left intentionally blank

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - 1
1. OVERVIEW
The Evertz 3406FR-HDBNC Fiber optic SFP HD-BNC is a high–capacity bulk optical conversion platform.
With the ability to accommodate 16x Evertz 3406/3405 series SFPs, up to 32x optical–to–electrical or
electrical–to–optical conversions may be performed in a single frame.
3406/3405 series SFPs are able to handle ASI, SDI, HD–SDI, 3G and 12G digital video signals, as well as
other signal rates up to 12G on non–relocked versions (e.g. MADI).Allow up to 18x signals to be multiplexed
on to a single fiber, greatly conserving fiber usage.
All components are hot swappable through the front of the frame including SFP's, frame controllers,
multiplexers, and power converters. This ensures the unit can be fully serviceable in the field without having
to be de-cabled or removed from the customer’s rack. The 3406FR-HDBNC frame accommodates main
and redundant AC inlet power supply modules
Features:
•Dual Power supplies (primary and redundant) and conversion trays (front extractable)
•Houses up to 16 front loading Evertz SFP modules
•Each slot can be used as an input or an output based on SFP type
•Dual primary & secondary 3406FR-HDBNC Frame Controllers for full VistaLINK®SNMP control and
monitoring
•No electrical re-cabling required when hot swapping modules
•Power options include external 12V power supply bricks or 1RU power supply tray which will power
up to 6 x 3406FR units with redundancy
•Four additional MSA-compliant SFP slots for fiber to fiber, fiber to coax, fiber to RJ-45 conversions
(SFP dependent).
•Accommodates redundant AC inlet power supplies and positive locking high density HD–BNC
connectors.
Additional Features for 3406FR-HDBNC:
•Optional bi-directional single or dual Mux/Demux of up to 18 wavelengths in the 1270nm to 1610nm
spectrum (ITU-T G.694.2 compliant)
•Optional 48V DC power inlet version
•MTP to LC/UPC fan out cable for convenient fiber connection from Evertz SFPs to Mux/Demux
modules
3406FR-BNC FRAME
Figure 1-1: 3406FR-HDBNC Frame

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Page - 2 Revision1.0
Figure 1-2: 3406FR-HDBNC Block Diagram

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - 3
2. TECHNICAL SPECIFICATIONS
3406FR-HDBNC FRAME
Density: Up to 32x EO, OE, or a mixture of EO and OE in a 1RU unit,4x MSA-
compliant SFP slots for additional SFP to SFP conversions
Impedance: 75 Ω
Connector: HD-BNC
COMMUNICATION AND CONTROL
Serial: RS-232 single micro USB B connector
Ethernet: SNMP over IEEE 802.3/U (10/100/1000 BaseTx) RJ-45 connector
Control: VistaLINK®, WebEasy
OPTICAL OUTPUT
Number of Outputs: Up to 2 per SFP
Connector: LC/UPC
Fiber: Compatible with single mode
Rise/Fall Time: <270ps
Optical Power:
Standard: -2dBm ± 1dBm
CWDM: -1dBm ± 1dBm
Wavelength:
Standard: 1310nm
CWDM: 1270nm-1610nm
ITU-T G.694.2 compliant
OPTICAL INPUT
Number of Inputs: Up to 2 per SFP
Connector: LC/UPC
Fiber: Compatible with single mode
Operating Wavelength: 1270nm to 1610nm
Maximum Input Power: -1dBm
Optical Sensitivity: -12dBm at 11.88Gb/s
ELECTRICAL INPUTS
*NOTE: Electrical outputs specs only apply to reclocking SFP modules (3405T13-R & 3406Txx/yy–2)
Standard: SMPTE 2082 (12Gb/s),SMPTE ST 424M (3Gb/s),SMPTE ST 292M
(1.5Gb/s),SMPTE ST 259M (270Mb/s),DVB–ASI
Connector: HD-BNC
Equalization: Automatic to 35m @ 12Gb/s, 80m @ 3Gb/s, 100m @1.5Gb/s, 250m @
270Mb/s (with Belden 1694A or equivalent)
Return Loss: > 15dB up to 1.5GHz
> 10dB up to 3GHz

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Page - 4 Revision1.0
ELECTRICAL OUTPUTS
*NOTE: Electrical outputs specs only apply to reclocking SFP modules (3406R-2 & 3406R-DA4R)
Voltage: Auto–ranging 100–240V AC, 50/60Hz
Max. Power Consumption: 60W
Status Indicators: Power supply status LEDs
(each per power supply)
Connector: HD-BNC
Signal Level: 800mV (nominal)
DC Offset: 0V +/- 0.5V
Rise and Fall Time: 12G: < 50ps
HD/3G: < 135ps
SD: < 900ps
Overshoot: < 10% of amplitude
Return Loss: > 15dB to 1.5GHz
> 10dB to 3GHz
Alignment Jitter: < 0.2UI to 1.485Gb/s,
< 0.3UI to 2.97Gb/s,
< 0.3UI to 11.88Gb/s
PHYSICAL
Physical: SFP form–factor
Dimensions: 1.8” H x 19” W x 8” D
Module Capacity: 16x Evertz SFP modules,
4x MSA–compliant SFP modules
Operating Temperature: 0–50°C (with 3406FAN installed)
COMPLIANCE
Laser Safety: Class 1 laser product, Complies
with 24 CFR 1040.10 and 1040.11,
IEC 60825–1
EMI/RFI: Complies with FCC part 15, Class A
Complies with EU EMC directives

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - 5
3. INSTALLATION
The 3406FR-HDBNC frames require 1 rack unit (i.e. 1.75 inches (45 mm) of standard 19 inch (483 mm)
wide rack space). To firmly fasten the frame to the equipment rack, make sure that all four mounting screws
are securely tightened.
Figure 3-1: External Views of 3406FR-HDBNC
FAN INSTALLATION AND REMOVAL (3406FAN)
Figure 2-11 provides an illustration of the 3406FAN front view.
Figure 3-2: Front View of 3406FAN
3.1.1. Cooling
The 3406FR-HDBNC frame is designed to ensure adequate cooling for up to 60 Watts of processing power
per frame. Fans at the sides of the frame accomplish forced air cooling. Adjacent equipment may be
mounted immediately to the top and bottom of the 3406FR-HDBNC frame. Additional module cooling is
provided by interior cooling channels to ensure that even fully loaded frames mounted adjacent to each
other will operate within the normal temperature range.
The 3406FAN module is capable of cooling the 3406FR from an operating ambient temperature of 0-50°C.

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Page - 6 Revision1.0
Figure 3-3: Cooling Fan Installation and Removal
If necessary, the cooling fans can be removed for the purposes of fan replacement. Always ensure that this
procedure is applied while the frame is off. Removing the fans will cause unwanted heat build-up in the
3406FR. Undo the captive screw and pull outwards on the metal tab at the bottom of the 3406FAN.
Installation is the reverse of removal.
CAUTION: To achieve adequate cooling, care should be taken to ensure that the
fan inlets and exhaust openings are free of obstructions.
CARE AND HANDLING OF OPTICAL FIBER
3.2.1. Safety
!
CLASS 1 LASER PRODUCT
3.2.2. Assembly
Assembly or repair of the Evertz®SFP modules is done only at Evertz facility and performed only by qualified
Evertz technical personnel.

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Revision1.0 Page - 7
3.2.3. Labeling
Certification and Identification labels are combined into one label. As there is inadequate space on the
product to place the label, it is reproduced here in the manuals.
•There is no date of manufacture on this label as it can be traced by bar code label placed on the
Evertz®SFP module.
•The model number of the SFPs containing lasers is one of: 3406T13-2, 3406Txx/yy-2, 3406R-2,
3406-DA4R, 3405T13-2, 3405Txx/yy-2, 3405R-2, 3405R-2R, 3405OO13-DA4 and 3405OOxx-
DA4.
•where xx and yy = 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61.
•XX/YY versions include the following: 27/29, 31/33, 35/37, 39/41, 43/45, 47/49, 51/53, 55/57, 59/61
Figure 3-4: Reproduction of Laser Certification and Identification Label
3.2.4. Handling and Connecting Fibers

Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to properly clean the optical
end face of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz
recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. For further information about care and
handling of fiber optic cable see the Evertz website. (http://www.evertz.com/resources/)
FIBER INPUT AND OUTPUT CONNECTIONS
These connections are made using standard LC fiber connector ends on single mode fiber optic cable.
There are a total of 18 dual SFP slots. There can be a mix of 32 fiber inputs or outputs on the 3406FR front
panel. A high quality fiber optic cable such as Corning SMF-28 or suitable equivalents should be used for
optimum performance. Compatible SFP modules currently come in four configurations: dual transmitters,
dual receivers, reclocking transmitter, and reclocking receiver.

3406 Frame Manual
3406FR -HDBNC Fiber Optic SFP HD-BNC Frame
Page - 8 Revision1.0
Figure 3-5: 3406FR-HDBNC Front View with Fiber Inputs and Outputs
Unpopulated SFP slots will remain inactive until the appropriate SFP is installed. Please ensure flat or ultra-
flat polished fiber LC connectors are used for the SFPs.

NOTE: Channels A and B on the front of the 3406FR frame correspond to channels
A and B on the rear of the frame (Figure 2-16).
Figure 2-15 depicts any one of the following Evertz®SFP modules: 3406T13-2, 3406Txx/yy-2, 3406R-2, ,
3406-DA4R.
Figure 3-6: Evertz®SFP Modules
The SFP fiber modules are equipped with a class 1 laser and emit invisible radiation. Avoid exposure to the
laser emitter and do not stare directly into unconnected SFP emitter ports or fiber ends that are connected
to SFP ports.
•It is recommended that trained and qualified personnel install, replace or handle this equipment.
•Ensure ESD precautions are followed during SFP installation.
•Store SFP modules in static bags and wear an ESD strap when handling the optical modules. SFP
modules are also dust sensitive.
•To prevent dust from entering the apertures of an SFP module, keep plugs inserted into the optical
bores.
•Do not repeatedly remove and insert SFP modules more often than necessary. Repeated removals
and insertions of an SFP module can shorten its life.