evertz MAGNUM-ROUTER-SS User manual

MAGNUM-ROUTER-SS
User Guide
© Copyright 2012
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario, Canada
L7L 5Z9
Phone: [phone]
Sales Fax: [phone]
Tech Support Phone: [phone]
Tech Support Fax: [phone]
Internet: Sales: [e-mail]
Tech Support: [email protected]
Web Page: http://www.evertz.com
Version 1.0 March 2012
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the MAGNUM Server. Evertz Microsystems expressly prohibits the
use of this manual for any purpose other than the operation of the Servers.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz
Microsystems.

MAGNUM-ROUTER-SS User Guide
Revision 1.0
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release March 2012
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof
nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

MAGNUM-ROUTER-SS User Guide
Revision 1.0
This page left intentionally blank

MAGNUM-ROUTER-SS User Guide
Revision 1.0
TABLE OF CONTENTS
1. CONFIGURING THE NETWORK SETTINGS.....................................................................1
2. CLUSTER CONFIGURATION.............................................................................................2
2.1. (HOST X) HOST NAME.........................................................................................................3
2.2. (HOST X) IP ADDRESS.........................................................................................................3
2.3. PREFERRED HOST..............................................................................................................4
2.4. CHANGE CLUSTER IP ADDRESS .......................................................................................4
3. UPGRADING.......................................................................................................................5
4. MAGNUM-ROUTER-SS LIMITS..........................................................................................6
Figures
Figure 2-1: Cluster Configuration...................................................................................................2
Figure 2-2: Change Host Setting...................................................................................................3
Figure 2-3: Host IP Address ..........................................................................................................3
Figure 2-4: Select Preferred Host..................................................................................................4
Figure 2-5: Change Cluster IP Address.........................................................................................4
Tables
Table 4-1: MAGNUM-ROUTER-SS Limits.....................................................................................6

MAGNUM-ROUTER-SS User Guide
Revision 1.0
This page left intentionally blank

MAGNUM-ROUTER-SS User Guide
Revision 1.0 Page 1
1. CONFIGURING THE NETWORK SETTINGS
The IP address of the MAGNUM-ROUTER-SS can be changed from the front panel of the unit. The
Network screen enables the user to configure the network settings for network ports A and B. The
following procedure outlines how to set an IP address:
1. To change the IP address, toggle to the appropriate number using the bottom left Select shaft
encoder. Turning the shaft encoder clockwise will enable the user to advance forward and
highlight the appropriate value. Turning the shaft encoder counter-clockwise will move the
selection tool backwards.
2. Once the desired value is highlighted (the text will be bright yellow), use the bottom right
Change shaft encoder to adjust the value of the selected number. Turning the shaft encoder
clockwise will increase the number value, while turning the shaft encoder counter-clockwise will
decrease the number value.
3. If you wish to apply your changed network settings, press the Apply option on the touch-
screen.
4. Bonding is not supported in MAGNUM-ROUTER-SS units.

MAGNUM-ROUTER-SS User Guide
Page 2Revision 1.0
2. CLUSTER CONFIGURATION
Once the network has been configured, the next step is to define the cluster setup. This information is
required whether there is only a single MAGNUM-ROUTER-SS or Main and Redundant MAGNUM-
ROUTER-SS. The cluster is configured by connecting to the MAGNUM-ROUTER-SS IP address using
a SSH session. A common program that can establish a SSH session is called Putty, other terminal
programs can be used as well. Once a SSH connection has been established to the MAGNUM-
ROUTER-SS, login using the account “admin” and the password “admin”. After a successful login, the
MAGNUM Server Control Console will be displayed. This console presents the user with a number of
operations that can be performed in order to properly set up your server. The Cluster Configuration
menu, as illustrated in Figure 2-1, enables the user to set the cluster information for primary and/or
redundant MAGNUM-ROUTER-SS. (Host names and IP addresses, preferred hosts and cluster IP
addresses).
Figure 2-1: Cluster Configuration

For more information concerning the MAGNUM Server Control Console, please
refer to the MAGNUM Manual.

MAGNUM-ROUTER-SS User Guide
Revision 1.0 Page 3
2.1. (HOST X) HOST NAME
To assign a host name to the primary host (Host 1), select the (host 1) Host Name option from the
Cluster Configuration menu. The dialog box in Figure 2-2 will appear when this option is selected.
Enter the primary host name into the “Enter host name” field and then select the OK button.
Figure 2-2: Change Host Setting
To assign a host name to the redundant server if applicable, select the (host 2) Host Name option and
enter the desired redundant server name into the “Enter host name” field and then select the OK
button.
2.2. (HOST X) IP ADDRESS
To assign a host IP address to the primary server, select the (host 1) IP Address option from the
Cluster Configuration menu. The dialog box in Figure 2-3 will appear when this option is selected.
Enter the desired host IP address into the “Enter (host name)’s IP address” field and then select the
OK button. This IP address should be the IP that was assigned in Section 1.
Figure 2-3: Host IP Address
If you wish to assign an IP address to the redundant server, select the (host 2) IP Address option and
enter the desired redundant server IP into the “Enter (host name)’s IP address” field and then select
the OK button.

MAGNUM-ROUTER-SS User Guide
Page 4Revision 1.0
2.3. PREFERRED HOST
The Preferred Host field will display the name of the primary server. If there is more than one server
available, the user can select the server that they wish to assign as the preferred, primary server.
A Preferred Host dialog will appear (as shown in Figure 2-4) enabling the user to select a preferred
host from the list of servers available. Toggle to the host in the list that you wish to make the primary
server and select it by pressing space key; then select the OK button while done. The selected server
will be set as the primary server. A preferred host is the server that will be made active if both primary
and secondary servers are brought online at the same time. This requires the cluster is configured
correctly and communication links between both servers are functioning correctly.
Figure 2-4: Select Preferred Host
2.4. CHANGE CLUSTER IP ADDRESS
To change the cluster IP address, select the Cluster IP Address option from the Cluster
Configuration menu. The dialog box in Figure 2-5 will appear when this option is selected. If the user
wishes to change the cluster IP address, enter a new IP address into the “Enter the Cluster IP address”
field and then select the OK button. The cluster IP address is the IP address assigned to the Active
MAGNUM server so that all clients have a single address connected to them regardless of which
MAGNUM Server is Active. This is the IP address you will use to access the WEB Configuration Tool,
and which will be manually programmed into any advanced panels for MAGNUM-SERVER
connectivity.
Figure 2-5: Change Cluster IP Address

MAGNUM-ROUTER-SS User Guide
Revision 1.0 Page 5
3. UPGRADING
The user can manually upload code onto the MAGNUM-ROUTER-SS unit using the Update screen.
The following procedure outlines how to manually update the device. This practice is not recommended
for typical users and should only be implemented when directed by Evertz personnel.
1. Plug a USB memory key into one of the USB ports on the front panel of the unit.
2. Select the Refresh menu option.
3. The Refresh screen will display the updates available on the USB memory key. If there are no
files listed, select the refresh option on the touch-screen. If there are still no files listed, try
rebooting the system and ensure the correct files are loaded on your USB memory key.
4. If the available files are listed on the display screen, toggle through the list using the bottom left
shaft encoder.
5. Once the desired file is highlighted, select the Install option on the touch-screen.
6. The Install Update screen will appear after a few seconds enabling the user to select whether
they would like to update the code. Select the Yes on touch-screen to apply the update, or
select the No if you do not wish to update the code.
After the installation of the update is complete, the user can remove the USB memory key from the
front panel and manually reboot the device.

MAGNUM-ROUTER-SS User Guide
Page 6Revision 1.0
4. MAGNUM-ROUTER-SS LIMITS

Please refer to the MAGNUM Manual for information regarding the configuration of
the MAGNUM-ROUTER-SS control system via the Web Configuration interface.
The limits for the MAGNUM-ROUTER-SS are outlined in Table 4-1. Please note that these limits are
enforced when configuring an MAGNUM-ROUTER-SS.
Total of any Combinations of Panels
15
3rd Party Interfaces (Quartz/Symphony)
2
Levels (in Virtual Ports Page)
5
Max Physical Srcs/Dsts
919x919
Max Virtual Srcs/Dsts
576x576
Embedded Audio Routing with MAGNUM AVIPs &
AVOPs
No
Subscriptions, Mirror Groups, Virtual Routers
No
Namesets
Global plus 3
Users
No (1 login only)
Reports
Yes
Salvos
15
Profiles (Not Including Profiles for Single-Profile
Interfaces)
7
Table 4-1: MAGNUM-ROUTER-SS Limits