Exerpeutic Folding Upright Bike User manual

Folding Upright Bike with Pulse
Item #1200
OWNER’S
MANUAL

SERVICE ------------------------------------------------------------------------ 2
IMPORTANT LABELS -------------------------------------------------------- 3
PRODUCT SAFETY ---------------------------------------------------------- 4
PART DRAWING -------------------------------------------------------------- 5
PART LIST ---------------------------------------------------------------------- 6
HARDWARE PACKING LIST & TOOLS --------------------------------- 8
ASSEMBLY --------------------------------------------------------------------- 9
COMPUTER ---------------------------------------------------------------------13
STORAGE ----------------------------------------------------------------------- 14
ADJUSTMENTS --------------------------------------------------------------- 15
TROUBLE SHOOTING & MAINTENANCE ---------------------------- 16
WARM UP ---------------------------------------------------------------------- 17
WARRANTY -------------------------------------------------------------------- 18
FAX FORM ---------------------------------------------------------------------- 19
TABLE OF CONTENTS
1

IMPORTANT: FOR NORTH AMERICA ONLY
To request product service and order
replacement parts, please call our
customer service department at:
1-866-924-1688
Monday through Friday, 8:00 AM-5:00 PM Pacific Standard Time,
or email us at: [email protected]
Please visit our website at www.paradigmhw.com.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
*Before returning this product to the store please contact
customer service at the contact number.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave, City of Industry, CA 91748, USA
SERVICE
2

IMPORTANT LABELS
3

Basic precautions should always be followed, including the following
safety instructions when using this equipment: Read all instructions
before using this equipment.
1. Read all the instructions in this manual and do warm up exercises before
using this equipment.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercise
of every position of the body is necessary. Refer to Warm Up pages.
After exercise, relaxation of the body is suggested for cool-down.
3. Please make sure all parts are not damaged and fixed well before use.
This equipment should be placed on a flat surface when using. Using a
mat or other covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not
wear clothes that might catch any part of the equipment; remember to
tighten the pedaling straps.
5. Do not attempt any maintenance or adjustments other than those
described in this manual. Should any problems arise, discontinue use
and consult an Authorized Service Representative.
6. Do not use the equipment outdoors.
7. This equipment is for household use only.
8. Only one person should be on the equipment while in use.
9. Keep children and pets away from the equipment while in use. This
machine is designed for adults only. This product requires a minimum of
6 feet of space for safe operation.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you
should stop exercising immediately and consult your physician before
continuing.
11. The maximum weight capacity for this product is 300 lbs/136 kgs.
WARNING: Before beginning any exercise program consult
your physician. This is especially important for the persons who are
over 35 years old or who have pre-existing health problems. Read all
instructions before using any fitness equipment.
CAUTION: Read all instructions carefully before operating this
product. Retain this Owner’s Manual for future reference.
PRODUCT SAFETY
4

PART DRAWING
5

No.
Description
Qty
No.
Description
Qty
001
Rear Frame
1
029
Hexagon Nut Cap M8
4
002
Front Frame
1
030
Curve Washer Ø8.2xØ22.2
4
003
Rear Stabilizer Ø50x1.5tx550L
1
031
Front Stabilizer Ø50x1.5tx450L
1
004
Handlebar Ø25
1
032
C-ring Ø10
2
005
Seat Post
1
033
Flat Washer Ø8.2xØ16.8
5
006
Seat Cushion
1
034
Nylon Nut M8
1
007
Left Pedal (YH-30X)
1
035
Magnet Bracket
1
008
Right Pedal (YH-30X)
1
036
Washer Ø6.2
2
009
Computer (81414)
1
037
Sensor with Wire
1
010
Wire Plug (15x9)
1
038
Flywheel
1
011
Rear Stabilizer End Cap
2
039
Belt Wheel with Crank Axle
1
012
Seat Post Plastic Bushing
1
040
Bearing Bracket A
2
013
Tension Control Knob (1080L)
1
041
Bearing Bracket B
2
014
Seat Height Adjustment Knob
M16
1
042
Bearing 6003RS
4
015
Sensor Wire (900L)
1
043
C-ring Ø17
6
016
Oval Wire Plug
4
044
Belt Wheel
1
017
Handlebar Foam Grip
Ø23x5.0tx420L
2
045
Bearing 6000Z
2
018
Left Shroud
1
046
Axle Ø12.8x94L
1
019
Right Shroud
1
047
Eyebolt M6
2
020
Top Shroud
1
048
Tension Bracket
2
021
Round Plastic Bushing
6
049
Front Frame Support Tube Holder
1
022
Safety Pin Ø10x110L
1
050
Nylon Nut M6
2
023
Left Crank
1
051
Nut M10
3
024
Right Crank
1
052
Washer Ø10.2xØ25
2
025
France Nut
2
053
Wave Washer Ø17
1
026
Crank Cover
2
054
Idle Wheel Axle
1
027
Round Phillips Head Drilling
Screw M4x20
7
055
Nylon Nut M10
1
028
Round Phillips Head Tapping
Screw M4x20
4
056
Bearing 6902Z
2
PART LIST
6

No.
Description
Qty
No.
Description
Qty
057
Axle Ø15.8x94.5L
1
072
Belt 230J3
1
058
Hexagon Socket Bolt M8x15
5
073
Hexagon Socket Bolt M6x12
4
059
Rubber Cushion
1
074
Spring Washer Ø6.2
4
060
Washer Ø8.2x Ø25x2.0t
2
075
Screw M5x15
2
061
Screw M6x10
6
076
Hexagon Socket Bolt M8x40L
1
062
Holder
1
077
Handlebar End Cap Ø25.4
2
063
Round Phillips Head Screw
M4x10
1
078
Front Frame Support Tube End
Cap Ø22.2
3
064
Plastic Washer
2
079
Hand Pulse Sensor Wire
2
065
C-ring Ø15
1
080
Nut M6
1
066
Screw M4x10L
2
081
Screw M6x20
1
067
Front Frame Support Tube
1
082
Hand Pulse Sensor
2
068
Screw M5x20
1
083
Countersunk Phillips Head Cap
Screw M4x20
2
069
Washer Ø5.2xØ18
1
084R
Front Stabilizer Right End Cap
1
070
Spring
1
084L
Front Stabilizer Left End Cap
1
071
Belt 240J4
1
7
PART LIST

HARDWARE PACKING LIST & TOOLS
8
Wrench 13-15
1 PC
Allen Wrench with Phillips
Screwdriver
1 PC
(14) Seat Height
Adjustment Knob M16
1 PC
(22) Safety Pin
Ø10x110L
1 PC
(29) Hexagon Nut Cap M8
4 PCS
(30) Curve Washer
Ø8.2xØ22.2
4 PCS
(33) Flat Washer
Ø8.2xØ16.8
3 PCS
(58) Hexagon Socket Bolt
M8x15
3 PCS
(66) Screw M4x10L
2 PCS
(73) Hexagon Socket Bolt
M6x12
4 PCS
(74) Spring Washer Ø6.2
4 PCS

Step 1
Stand up the base of the machine by separating the Rear and Front Frames
(1, 2). Pull the Rear and Front Frames (1, 2) apart from each other. Align pin
holes for inserting the Ø10x110L Safety Pin (22) then insert the Ø10x110L
Safety Pin (22) into the holes on the Rear and Front Frames (1, 2) to lock the
frames in place.
Attach the Front Stabilizer (31) onto the Front Frame (2) with two M8 Hexagon
Nuts Cap (29) and Ø8.2xØ22.2 Curve Washers (30). Tighten nut cap with the
Wrench provided.
Attach the Rear Stabilizer (3) onto the Rear Frame (1) with two M8 Hexagon
Nuts Cap (29) and Ø8.2xØ22.2 Curve Washers (30). Tighten nut cap with the
Wrench provided.
Hardware:
ASSEMBLY
9
Tool:
Wrench 13-15
(29) Hexagon Nut Cap M8
4 PCS
(30) Curve Washer
Ø8.2xØ22.2
4 PCS
(22) Safety Pin
Ø10x110L
1 PC

Step 2
The Cranks, Pedals, Pedal Shafts and Pedal Straps are marked “R” for
Right and “L” for Left.
Insert the pedal shaft of Left Pedal (7) into threaded hole in the Left Crank (23).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will
strip the threads.
Tighten the pedal shaft of Left Pedal (7) with the Wrench provided.
Insert pedal shaft of Right Pedal (8) into threaded hole in Right Crank (24).
Turn the pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Pedal (8) with the Wrench provided.
.
ASSEMBLY
10
Tool:
Wrench 13-15

Step 3
Align bolt holes on underside of Seat Cushion (6) with holes on top of Seat Post
(5), then attach with three Ø8.2xØ16.8 Flat Washers (33) and three M8x15
Hexagon Socket Bolts (58). Tighten bolts with the Allen Wrench with Phillips
Screwdriver provided.
Insert the Seat Post (5) into Seat Post Plastic Bushing (12). Adjust seat
position and insert the M16 Seat Height Adjustment Knob (14). Turn the M16
Seat Height Adjustment Knob (14) in a clockwise direction to tighten.
Hardware:
ASSEMBLY
11
Allen Wrench with Phillips
Screwdriver
Tool:
(14) Seat Height
Adjustment Knob M16
1 PC
(33) Flat Washer
Ø8.2xØ16.8
3 PCS
(58) Hexagon Socket Bolt
M8x15
3 PCS

Step 4
Connect the Sensor Wire (15) from the Rear Frame (1) to the wire that comes
from the Computer (9).
Attach the Handlebar (4) into the Rear Frame (1) with four M6x12 Hexagon
Socket Bolts (73) and four Ø6.2 Spring Washers (74). Tighten bolts with the
Allen Wrench with Phillips Screwdriver provided.
Attach the Holder (62) onto the Rear Frame (1) with two M4x10L Screws (66).
Tighten screws with the Allen Wrench with Phillips Screwdriver provided.
Hardware:
12
ASSEMBLY
(66) Screw M4x10L
2 PCS
(73) Hexagon Socket Bolt
M6x12
4 PCS
(74) Spring Washer Ø6.2
4 PCS
Allen Wrench with Phillips
Screwdriver
Tool:

SPECIFICATIONS:
TIME --------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------ 0.0-999.9 ML/H
DISTANCE ------------------------------- 0.0-999.9 ML
CALORIE --------------------------------- 0.0-999.9 KCAL
ODOMETER ----------------------------- 0.0-999.9 ML
PULSE ------------------------------------ 40-240 BEATS/MIN
COMPUTER FUNTIONS:
AUTO ON/OFF: If you leave the computer idle for 4 minutes, the power will
shut off automatically.
SCAN: Press the button until the screen displays SCAN; the computer will
automatically scan the function of TIME, ODOMETER, CALORIE, PULSE,
SPEED, and DISTANCE, every 6 seconds.
TIME: Displays your elapsed workout time in minutes and seconds. The
computer will automatically count up from 0:00 to 99:59 in one second
intervals.
SPEED: Displays your workout speed in miles per hour.
DISTANCE: Displays the accumulative distance traveled during each
workout up to a maximum of 999.9 miles.
CALORIE: The computer will estimate the cumulative calories burned at any
given time during your workout. The computer will count up from 0.0 to
999.9 calories.
ODOMETER: Displays the total accumulative distance traveled during each
workout up to a maximum of 999.9 miles. The data values of ODOMETER
can not be reset to zero by pressing and holding the button more than 2
seconds. If user takes out the batteries from the computer, the
ODOMETER data values will reset to zero.
PULSE: The computer will display your pulse rate in beats per minute after
holding both hands on handlebar grip sensors during exercise. To ensure
the pulse readout is more precise, please always hold on to the handlebar
grip sensors with two hands instead of one.
RESET: pressing and holding the button more than 2 seconds will reset all
functional values to zero except the odometer data values.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AAA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in
proper contact with batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial legible, remove batteries and wait
15 seconds before reinstalling.
COMPUTER
13

For your convenience, the bike can be folded up and placed in a storage area.
1. Remove the Safety Pin (22) from the bike.
2. Push the Rear and Front Frames (1, 2) together until they meet.
3. Align pin holes for inserting the Safety Pin (22) then insert the removed
Safety Pin (22) into the holes on the Rear and Front Frames (1, 2) to lock
the frames in place.
STORAGE
14

Adjusting the Tension Control Knob
To increase the load, turn the tension control
knob in a clockwise direction.
To decrease the load, turn the tension control
knob in a counterclockwise direction.
Adjusting the Seat Height
Turn the seat height adjustment knob in a
counterclockwise direction until the seat post
can be slid up or down and then slide the seat
post up or down direction to the suitable
position. Lock the seat post in place by
tightening the seat height adjustment knob in
a clockwise direction.
NOTE: When adjusting the height of seat
post, make sure the seat post plastic
bushing does not exceed the mark line on
the seat post.
ADJUSTMENTS
15
Tension Control Knob
M16 Seat Height
Adjustment Knob

TROUBLE SHOOTING
PROBLEM: There is no display on the computer console.
SOLUTION: Remove the computer console and verify the wire that comes from the
computer console are properly connected to the wires that come from the rear
frame.
SOLUTION: Check if the batteries are correctly positioned and battery springs are
in proper contact with batteries.
SOLUTION: The batteries in the computer console may be dead. Change to new
batteries.
PROBLEM: There is no heart rate reading or is erratic / inconsistent.
SOLUTION: Make sure that the wire connections for the hand pulse sensors are
secure.
SOLUTION: To ensure the pulse readout is more precise, always hold on to the
handlebar grip sensors with two hands instead of just with one hand only.
SOLUTION: Gripping the hand pulse sensors too tight. Try to maintain moderate
pressure while holding onto the hand pulse sensors.
PROBLEM: The bike makes a squeaking noise when in use.
SOLUTION: The bolts may be loose on the bike, please inspect the bolts and
tighten the loose bolts.
MAINTENANCE
Cleaning
The bike can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the bike
after each use. Be careful not get excessive moisture on the computer display
panel as this might cause an electrical hazard or electronics to fail.
Please keep the bike, specially, the computer console, out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness
every week.
Storage
Store the bike in a clean and dry environment away from children.
TROUBLE SHOOTING & MAINTENCE
16

WARM UP
17
Quadriceps Stretch
With one hand against a wall for balance, reach behind
you and pull your right foot up. Bring your heel as close
to your buttocks as possible. Hold for 15 counts and
repeat with left foot up.
Inner Thigh Stretch
Sit with the soles of your feet together with your knees
pointing outward. Pull your feet as close into your groin
as possible.
Gently push your knees towards the floor. Hold for 10
counts.
Toe Touches
Slowly bend forward from your waist, letting you back and
shoulders relax as you stretch toward your toes. Reach
down as far as you can and hold for 15 counts.
Hamstring Stretches
Sit with your right leg extended. Rest the sole of your left
foot against your right inner thigh. Stretch toward your
toe as far as possible. Hold for 15 counts Relax and then
repeat with left leg extended.

Paradigm Health & Wellness, Inc. warrants to the original purchaser that this
product is free from defects in material and workmanship when used for the
purpose intended, under the conditions that it has been installed and operated in
according to Paradigm’s Owner’s Manual. Paradigm’s obligation under this
warranty is limited to replacing free of charge, any parts which may prove to be
defective under normal home use. This warranty does not include any damage
caused by improper operation, misuse or commercial application. From the date
of purchase, the product is warranted to be free from defects for 1 (one) year. All
parts and workmanship, including upholstery, foam, ball bearings, pulleys, cables,
shocks, all tension mechanisms, wheels, pedals and hardware are to be free from
defects for 90 days. This warranty is offered only to the original owner and is not
transferable. Proof of purchase is required. This warranty is offered only to the
original owner and is not transferable.
Ordering Replacement Parts
Replacement parts can be ordered by calling or emailing our customer service
department
[email protected]
1-866-924-1688
Monday through Friday, 8:00 AM - 5:00 PM (PST).
When ordering replacement parts please have the following information ready:
1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
WARRANTY
18

PARADIGM
PARTS REQUEST FAX FORM
Please fax this form to (1-626-810-2166)
OR YOU CAN EMAIL CUSTOMER SERVICE REQUESTS TO
[email protected]
NAME: _______________________________________________________
ADDRESS: ____________________________________________________
CITY ______________ STATE ______________ ZIP ___________________
TELEPHONE: (Day) _____________________________________________
(Night) ____________________________________________
(Email Address) ____________________________________
SERIAL#: __________________________________________
MODEL#: __________________________________________
PURCHASE DATE: ______________________________________________
PURCHASE FROM: ______________________________________________
“YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”
PART #
DESCRIPTION
QTY
OFFICIAL USE ONLY
SHIP DATE: ___________________________________________
TRK #: _______________________________________________
BACK ORDER: ________________________________________
FAX FORM
19