Exerpeutic 1200 User manual


Ite
m
F
o
IMP
O
Rea
d
own
e
The
s
with
o
m
#1200
o
ldi
n
O
RTANT:
d
all instr
u
e
r’s manu
s
pecificati
o
o
ut notice.
n
g U
u
ctions ca
al for fut
u
o
ns of this
O
W
pri
g
r
efully be
f
u
re refere
n
p
roduct m
W
NE
R
g
ht
B
fore usin
g
n
ce.
m
ay vary fr
o
R
’S
M
B
ike
w
g
this pro
d
o
m this ph
o
M
ANU
w
ith
d
uct. Re
t
o
to, subje
c
AL
Pul
s
tain this
c
t to chan
g
s
e
g
e

1200.2‐101414

SERVICE ------------------------------------------------------------------------ 2
LABEL PLACEMENT --------------------------------------------------------- 3
PRODUCT SAFETY ---------------------------------------------------------- 4
OVERVIEW DRAWING ------------------------------------------------------ 5
PARTS LIST ---------------------------------------------------------------------6
HARDWARE LIST & TOOLS ----------------------------------------------- 8
ASSEMBLY --------------------------------------------------------------------- 9
COMPUTER ---------------------------------------------------------------------13
STORAGE ----------------------------------------------------------------------- 14
ADJUSTMENTS --------------------------------------------------------------- 15
TROUBLE SHOOTING & MAINTENANCE ---------------------------- 17
WARM UP ---------------------------------------------------------------------- 18
WARRANTY -------------------------------------------------------------------- 19
FAX FORM ---------------------------------------------------------------------- 20
TABLEOFCONTENTS
1

IMPORTANT: FOR NORTH AMERICA ONLY
To request product service and order
replacement parts, please call our
customer service department at:
1-844-641-7921
Monday through Friday, 8:00 AM-5:00 PM Pacific Standard Time,
or email us at: [e-mail]
Please visit our website at www.paradigmhw.com.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
*Before returning this product to the store please contact
customer service at the contact number.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
SERVICE
2

LABE
L
L
PLACE
M
3
M
ENT

Basic precautions should always be followed, including the following
safety instructions when using this equipment. Read all instructions
before using this equipment.
1. Read all the instructions in this manual and do warm up exercises before
using this equipment.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercise
of every position of the body is necessary. Refer to Warm Up pages.
After exercise, relaxation of the body is suggested for cool-down.
3. Please make sure all parts are not damaged and fixed well before use.
This equipment should be placed on a flat surface when using. Using a
mat or other covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not
wear clothes that might catch any part of the equipment; remember to
tighten the pedaling straps.
5. Do not attempt any maintenance or adjustments other than those
described in this manual. Should any problems arise, discontinue use
and consult an Authorized Service Representative.
6. Do not use the equipment outdoors.
7. This equipment is for household use only.
8. Only one person should be on the equipment while in use.
9. Keep children and pets away from the equipment while in use. This
machine is designed for adults only. This product requires a minimum of
6 feet of space for safe operation.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you
should stop exercising immediately and consult your physician before
continuing.
11. The maximum weight capacity for this product is 300 lbs / 136kgs.
WARNING:Before beginning any exercise program consult
your physician. This is especially important for the people who are
over 35 years old or who have pre-existing health problems. Read all
instructions before using any fitness equipment.
CAUTION:Read all instructions carefully before operating this
product. Retain this Owner’s Manual for future reference.
PRODUCTSAFETY
4

84L
84R
11
60
64
58
17
49
27
10
79
83
36
16
82
81
80
58
78
34
33
33
76
66
20
24
18
28
27
27
19
35
14
9
32
31
75
73
1
2
3
4
5
6
7
8
11
12
13
15
16
17
21
22
23
25
26
29
30
33
37
38
39
40
42
43
44
45
46
47
48
50
51
64
53
54
55
56
65
52
57
58
59
60
61
61
63
62
67
68
69
70
71
72
51
45
47
48
50
25 26
29
30
32
43
42
43
43
42
43
42 40
21
78
21
74
73 73
74
77
85
86
87
OVERVIEWDRAWING
5

No. Description Qty No. Description Qty
001 Rear Frame 1 029 Hexagon Nut Cap M8 4
002 Front Frame 1 030 Curve Washer Ø8.2xØ22.2 4
003 Rear Stabilizer Ø50x1.5tx550L 1 031 Front Stabilizer Ø50x1.5tx550L 1
004 Handlebar Ø25 1 032 C-ring Ø10 2
005 Seat Post 1 033 Flat Washer Ø8.2xØ16.8 5
006 Seat Cushion 1 034 Nylon Nut M8 1
007 Left Pedal (YH-30X) 1 035 Magnet Bracket 1
008 Right Pedal (YH-30X) 1 036 Washer Ø6.2 2
009 Computer (81414) 1 037 Sensor with Wire 1
010 Wire Plug (15x9) 1 038 Flywheel 1
011 Rear Stabilizer End Cap 2 039 Belt Wheel with Crank Axle 1
012 Seat Post Plastic Bushing 1 040 Bearing Bracket A 2
013 Tension Control Knob (1080L) 1 042 Bearing 6003RS 4
014 Seat Height Adjustment Knob
M16 1 043 C-ring Ø17 6
015 Sensor Wire (900L) 1 044 Belt Wheel 1
016 Oval Wire Plug 4 045 Bearing 6000Z 2
017 Handlebar Foam Grip
Ø23x5.0tx420L 2 046 Axle Ø12.8x94L 1
018 Left Shroud 1 047 Eyebolt M6 2
019 Right Shroud 1 048 Tension Bracket 2
020 Top Shroud 1 049 Front Frame Support Tube Holder 1
021 Round Plastic Bushing 6 050 Nylon Nut M6 2
022 Safety Pin Ø10x110L 1 051 Nut M10 3
023 Left Crank 1 052 Washer Ø10.2xØ25 1
024 Right Crank 1 053 Wave Washer Ø17 1
025 France Nut 2 054 Idle Wheel Axle 1
026 Crank Cover 2 055 Nylon Nut M10 1
027 Round Phillips Head Drilling
Screw M4x20 7 056 Bearing 6902Z 2
028 Round Phillips Head Tapping
Screw M4x20 4 057 Axle Ø15.8x94.5L 1
PARTS LIST
6

No. Description Qty No. Description Qty
058 Hexagon Socket Bolt M8x15 5 074 Spring Washer Ø6.2 4
059 Rubber Cushion 1 075 Screw M5x15 2
060 Washer Ø8.2x Ø25x2.0t 2 076 Hexagon Socket Bolt M8x40L 1
061 Flat Phillips Head Screw M6x10 6 077 Handlebar End Cap Ø25.4 2
062 Holder 1 078 Front Frame Support Tube End
Cap Ø22.2 3
063 Round Phillips Head Screw
M4x10 1 079 Hand Pulse Sensor Wire 2
064 Plastic Washer 2 080 Nut M6 1
065 C-ring Ø15 1 081 Screw M6x15 1
066 Screw M4x10L 2 082 Hand Pulse Sensor 2
067 Front Frame Support Tube 1 083 Countersunk Phillips Head Cap
Screw M4x20 2
068 Screw M5x20 1 084R Front Stabilizer Right End Cap 1
069 Washer Ø5.2xØ18 1 084L Front Stabilizer Left End Cap 1
070 Spring 1 085 Spring Washer M6 1
071 Belt 240J4 1 086 Nylon Nut 9/16 UNC12(L) 1
072 Belt 230J3 1 087 Nylon Nut 9/16 UNC12(R) 1
073 Hexagon Socket Bolt M6x12 4
7
PARTSLIST

HARDWARELIST&TOOLS
8
(14) Seat Height
Adjustment Knob
1 PC
(22) Safety Pin
1 PC (29) Hexagon Nut Cap
4 PCS
(30) Curve Washer
4 PCS (33) Flat Washer 3 PCS (58) Hexagon Socket Bolt 3 PCS
(66) Screw
2 PCS (73) Hexagon Socket Bolt 4 PCS (74) Spring Washer
4 PCS
Wrench 13-15
1 PCS Allen Wrench with Phillips Screwdriver
1 PCS
Wrench 19MM
1 PCS

Ste
Sta
(1,
2
hol
e
hol
e
A
tt
a
(2)
w
ca
p
A
tt
a
Ca
p
pro
v
Ha
(2
2
p 1
nd up the
b
2
). Pull t
h
e
s for inse
r
e
s on the
R
a
ch the Fr
o
w
ith two
H
p
s with the
a
ch the Re
p
(29) and
v
ided.
rdware:
3
30
29
Re
a
2
) Safety
P
1 PC
b
ase of th
e
h
e Rear a
n
r
ting the S
R
ear and
F
o
nt Stabili
z
H
exagon N
u
Wrench p
r
ar Stabiliz
e
two Curv
e
1
2
ar
Stabiliz
e
P
in
e
machine
n
d Front F
r
afety Pin (
F
ront Fram
z
er (31) wi
t
u
ts Cap (2
r
ovided.
e
r (3) ont
o
e
Washers
A
S
e
r (3)
(29) He
x
by separ
a
r
ames (1,
2
(
22) then i
n
m
es (1, 2) t
o
t
h the tran
s
9) and tw
o
o
the Rear
(30). Tig
SSEMB
L
9
22
31
29
30
x
agon Nu
t
4 PCS
a
ting the R
2
) apart fr
o
n
sert the
S
o
lock the
f
s
port whe
e
o
Curve W
a
Frame (1)
hten nut c
a
L
Y
Tool:
F
ront Sta
b
Transpo
r
t
Cap
e
ar and F
r
o
m each o
t
afety Pin
(
f
rames in
p
e
ls onto th
e
a
shers (3
0
with two
H
a
ps with t
h
Wrench
b
ilizer (31)
r
t Wheel
(30) C
u
4
r
ont Fram
e
t
her. Ali
g
(
22) into t
h
p
lace.
e
Front Fr
a
0
). Tighte
H
exagon
N
h
e Wrench
1
3
-15
urve Was
h
4
PCS
e
s
n pin
h
e
a
me
n nut
N
uts
h
e
r

86
Step 2
Loosen Nylon Nut (L)(86) and Nylon Nut (R)(87) from Left and Right Pedal (7)
&(8) first.
The Cranks, Pedals, Pedal Shafts and Pedal Straps are marked “R” for
Right and “L” for Left.
Insert the pedal shaft of Left Pedal (7) into threaded hole in the Left Crank (23).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will
strip the threads.
Tighten the pedal shaft of Left Pedal (7) with the Wrench 13-15 provided, then
tighten Nylon Nut (L)(86) with the Wrench 19mm provided.
Insert pedal shaft of Right Pedal (8) into threaded hole in Right Crank (24).
Turn the pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Pedal (8) with the Wrench provided, then tighten
Nylon Nut (R)(87) with the Wrench 19mm provided.
ASSEMBLY
10
Tool:
Wrench 13-15
Wrench 19MM
1 PCS
Tool:

Step 3
Align bolt holes on underside of Seat Cushion (6) with holes on top of Seat Post
(5), then attach with three Flat Washers (33) and three Hexagon Socket Bolts
(58). Tighten bolts with the Allen Wrench provided.
Insert the Seat Post (5) into Seat Post Plastic Bushing (12). Adjust seat
position and insert the Seat Height Adjustment Knob (14). Turn the Seat
Height Adjustment Knob (14) in a clockwise direction to tighten.
Hardware:
ASSEMBLY
11
Allen Wrench with Phillips
Screwdriver
Tool: Allen Wrench
Phillips Screwdriver
(14) Seat Height
Adjustment Knob
1 PC
(33) Flat Washer
3 PCS (58) Hexagon Socket Bolt 3 PCS

Step 4
Connect the Sensor Wire (15) from the Rear Frame (1) to the wire that comes
from the Computer (9).
Attach the Handlebar (4) into the Rear Frame (1) with four Hexagon Socket Bolts
(73) and four Spring Washers (74). Tighten bolts with the Allen Wrench
provided.
Attach the Holder (62) onto the Rear Frame (1) with two Screws (66). Tighten
screws with the Phillips Screwdriver provided.
Hardware:
12
ASSEMBLY
Allen Wrench with Phillips
Screwdriver
Tool: Allen Wrench
Phillips Screwdriver
(66) Screw
2 PCS (73) Hexagon Socket Bolt 4 PCS (74) Spring
Washer

SP
E
TI
M
SP
E
DI
S
CA
L
OD
O
PU
L
CO
AU
T
shu
SC
A
aut
o
SP
E
TI
M
co
m
int
e
SP
E
DI
S
wo
r
CA
L
giv
e
99
9
OD
O
wo
r
can
sec
OD
O
PU
L
hol
d
the
gri
p
RE
S
fun
c
HO
W
1.
2.
3.
4.
5.
E
CIFICAT
I
M
E ----------
E
ED -------
S
TANCE --
-
L
ORIE ----
OMETER
L
SE -------
-
MPUTER
T
O ON/O
F
t off auto
m
A
N: Press
o
matically
E
ED, and
D
M
E: Displa
y
m
puter will
e
rvals.
E
ED: Disp
S
TANCE:
D
r
kout up to
L
ORIE: T
h
e
n time du
r
9
.9 calorie
s
OMETER:
r
kout up to
n
not be re
s
c
onds. If
u
OMETER
L
SE: The
c
d
ing both
h
pulse rea
d
p
sensors
w
S
ET: pres
s
c
tional val
u
W
TO INS
Remove
t
Place tw
o
Insure b
a
proper c
o
Re-instal
l
If the dis
p
15 secon
I
ONS:
-------------
-
-------------
-
-
------------
-
-------------
-
-------------
-
-
------------
-
FUNTION
S
F
F: If you l
e
m
atically.
the butto
n
scan the f
D
ISTANC
E
y
s your el
a
automatic
a
lays your
w
D
isplays th
a maxim
u
h
e comput
e
r
ing your
w
s
.
Displays
t
a maxim
u
s
et to zero
u
ser takes
data valu
e
c
omputer
w
h
ands on
h
d
out is mo
r
w
ith two h
a
s
ing and h
o
u
es to zer
o
TALL TH
E
t
he batter
y
o
"SIZE-
AA
a
tteries ar
e
o
ntact with
l
the batte
r
p
lay is ille
g
ds before
-
-------------
-
-------------
-
-------------
-
-
-------------
-
------------
-
-
-------------
-
S
:
e
ave the
c
n
until the
s
u
nction of
E
, every 6
a
psed wor
k
a
lly count
w
orkout s
p
e accumu
l
u
m of 999.
9
e
r will esti
m
w
orkout.
T
t
he total a
c
u
m of 999.
9
by pressi
n
out the b
a
e
s will res
e
w
ill displa
y
h
andlebar
g
r
e precise,
a
nds inste
a
o
lding the
o
except t
h
E
BATTE
R
y
cover at
t
A
A" batteri
e
e
correctly
batteries.
r
y cover.
g
ible or onl
reinstallin
g
C
O
-- 0:00-99
-- 0.0-999
-
- 0.0-999
-- 0.0-999
-
-- 0.0-999
-
- 40-240
c
omputer i
d
s
creen dis
p
TIME, OD
seconds.
k
out time i
n
up from 0:
p
eed in mil
e
l
ative dist
a
9
miles.
m
ate the c
T
he comp
u
c
cumulati
v
9
miles.
T
n
g and hol
a
tteries fro
m
e
t to zero.
y
you
r
pul
s
g
rip senso
,
please al
w
a
d of one.
button mo
h
e odomet
e
R
IES:
t
he rear of
es into th
e
positioned
y partial l
e
g
.
O
MPUT
E
13
:59 MIN:
S
.9 ML/H
.9 ML
.9 KCAL
.9 ML
BEATS/MI
d
le for 4 m
p
lays SC
A
OMETER
,
n
minutes
a
00 to 99:5
e
s per ho
u
a
nce travel
umulative
u
ter will c
o
v
e distanc
e
T
he data
v
ding the b
u
m
the co
m
s
e rate in b
rs during
e
w
ays hold
re than 2
s
er
data val
computer
.
e
battery h
o
and batte
e
gible, rem
E
R
S
EC
N
inutes, th
e
A
N; the co
m
CALORI
E
a
nd secon
9
in one s
e
u
r.
e
d during
e
calories b
u
o
unt up fro
m
e
traveled
d
alues of
O
u
tton mor
e
puter, the
eats per
m
e
xercise.
on to the
h
s
econds w
ues.
.
o
using.
ry springs
ove batter
e
power wi
l
m
puter will
E
, PULSE,
ds. The
e
cond
each
u
rned at a
n
m
0.0 to
d
uring ea
c
O
DOMETE
R
e
than 2
m
inute afte
r
To ensur
e
h
andleba
r
w
ill reset all
are in
r
ies and w
a
l
l
n
y
h
R
r
e
a
it

For your convenience, the bike can be folded up and placed in a storage area.
1. Remove the Safety Pin (22) from the bike.
2. Push the Rear and Front Frames (1, 2) together until they meet.
3. Align pin holes for inserting the Safety Pin (22) then insert the removed
Safety Pin (22) into the holes on the Rear and Front Frames (1, 2) to lock
the frames in place.
STORAGE
14
1
2
22
22
1
2

Adjusting the Tension Control Knob
To increase the tension, turn the tension control knob in a clockwise direction.
To decrease the tension, turn the tension control knob in a counterclockwise
direction.
Adjusting the Seat Height
Turn the seat height adjustment knob in a counterclockwise direction until the
seat post can be slid up or down and then slide the seat post up or down
direction to the suitable position. Lock the seat post in place by tightening the
seat height adjustment knob in a clockwise direction.
NOTE: When adjusting the height of seat post, make sure the seat post
plastic bushing does not exceed the mark line on the seat post.
ADJUSTMENTS
15

Adj
Th
e
Sn
a
3).
Sel
e
fro
m
the
Us
e
usting th
e
e
left pedal
a
p the thre
e
e
ct one of
m
the ped
a
L mark o
n
e
the sam
e
2
4
e
Pedal S
t
strap whi
c
e
hole end
the adjust
a
l. Snap
t
n
the strap
e
procedur
e
t
rap
c
h has L
m
onto the i
n
m
ent hole
s
t
he other
e
(see Figu
r
e
to snap
t
ADJ
1
m
arked on
t
n
side edg
e
s
which all
e
nd onto th
r
es 4 and
5
t
he right p
e
16
USTM
E
t
he strap (
s
e
of the lef
t
ow your f
o
e outside
e
5
).
e
dal strap
o
NTS
3
5
L mar
k
s
ee Figur
e
t
pedal (se
e
o
ot to be e
a
e
dge of th
e
o
nto the ri
g
k
e
1).
e Figures
2
a
sily remo
v
e
left ped
a
g
ht pedal.
2
and
v
ed
a
l with

MAINTENANCE
Cleaning
The bike can be cleaned with a soft clean damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the bike after each
use. Be careful not to get excessive moisture on the computer display panel as
this might cause an electrical hazard or electronics to fail.
Please keep the bike, especially the computer console out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts, nuts, screws, and pedals on the machine for
proper tightness every week.
Storage
Store the bike in a clean and dry environment away from children.
TROUBLE SHOOTING
PROBLEM: There is no display on the computer console.
SOLUTION: Remove the computer console and verify the wire that comes from the
computer console are properly connected to the wires that come from the rear
frame.
SOLUTION: Check if the batteries are correctly positioned and battery springs are
in proper contact with batteries.
SOLUTION: The batteries in the computer console may be dead. Replace with
new batteries.
PROBLEM: There is no heart rate reading or heart rate reading is erratic /
inconsistent.
SOLUTION: Make sure that the wire connections for the hand pulse sensors are
secure.
SOLUTION: To ensure the pulse readout is more precise, always hold on to the
handlebar grip sensors with two hands instead of just with one hand only.
SOLUTION: Avoid gripping the hand pulse sensors too tight. Try to maintain
moderate pressure while holding onto the hand pulse sensors.
PROBLEM: The bike makes a squeaking noise when in use.
SOLUTION: The bolts may be loose on the elliptical trainer. Please inspect all of
the bolts and tighten any loose bolts.
MAINTENANCE&TROUBLESHOOTING
17

Qu
a
Wit
h
yo
u
to
y
rep
e
Inn
Sit
w
poi
n
as
p
Ge
n
co
u
To
e
Slo
w
sh
o
do
w
Ha
m
Sit
w
foo
t
toe
rep
e
a
driceps
S
h
one han
d
u
and pull
y
y
our butto
c
e
at with le
f
er Thigh
S
w
ith the s
o
n
ting outw
a
p
ossible.
n
tly push
y
u
nts.
e
Touche
s
w
ly bend f
o
o
ulders rel
a
w
n as far a
m
string S
t
w
ith your
r
t
against y
o
as far as
p
e
at with le
f
S
tretch
d
against
a
y
our right f
o
c
ks as pos
s
f
t foot up.
S
tretch
o
les of you
a
rd. Pull
y
our knees
s
o
rward fro
a
x as you
s
s you can
t
retches
r
ight leg e
x
o
ur right i
n
p
ossible.
f
t leg exte
n
W
a
wall for
b
o
ot up.
B
s
ible. Ho
l
r feet toge
your feet
a
towards t
h
m your w
a
s
tretch to
w
and hold
f
x
tended.
n
ner thigh.
Hold for 1
n
ded.
W
ARM
U
18
b
alance, re
B
ring your
h
ld for 15 c
o
e
ther with
y
a
s close in
h
e floor.
a
ist, letting
w
ard your t
o
f
or 15 cou
n
Rest the s
Stretch
t
5 counts
R
U
P
ach behin
d
h
eel as cl
o
o
unts and
y
our knee
s
to your gr
o
Hold for 1
0
you back
a
o
es. Re
a
n
ts.
ole of you
r
t
oward yo
u
R
elax and
t
d
o
se
o
in
0
a
nd
a
ch
r
left
ur
t
hen