Extreme Canopy EMX ALPHA User manual

www.extremecanopy.com [email protected] [phone]
EMX ALPHA INSTRUCTIONS
LAY OUT ACCESSORIES INFLATION SECURING ENJOY
Inflation & Deflation
Insert the one way valve into the main
value, screw until nger tight. Ensure the
valve cap is open.
Once full turn tap o󰀨 and remove hose.
Close the valve cap and screw until
nger tight. Zip the water weight cover
Insert hose into the one way valve, turn
water on at tap and begin to ll the water
weight. Fill the water weight until rm.
1. 2. 3.
Water Weight Instructions
Two water weights are to be attached to each leg of inflatable.

Remove inatable tent from
protective cover.
Lay the inatable tent out at & extend
all legs.
Roll out the inatable tent.
Each leg on the inatable tent has a valve.
Ensure all valves are closed. Open one valve
and connect pump to inate.
Layout walls and awning. Conrm
positioning and zip together.
During the ination process, when legs
become rm push up from underneath.
Ensure all legs are lined up and canopy
is centered. Check frame is rm.
Connect the pump to selected ination
valve and begin ination.
Position awning support tube into the
velcro located at the leg hub. Insert
the two berglass rods into position to
tension awning.
www.extremecanopy.com [email protected] [phone]
EMX ALPHA INSTRUCTIONS
Inflation Instructions
WARNING READ INSTRUCTIONS CAREFULLY BEFORE USE
1.
4.
7.
10.
2.
5.
8.
3.
6.
9.
12.
Connect pump to awning valve and
inate until awning is rm. (Do not over
inate).
11 .
Fix two water weights per frame leg.
Attach leg strap to bottom water weight.
Green guide ropes should be used in
moderate to strong wind conditions.
If installed on grass steel pins can be
used instead of water weights to secure
tent to ground.

ACCESSORIES
The below are recommended items to assist with ination and not included in product package.
Stakes Repair KitSandbags Pump
Hammer / MalletGenerator Extension Lead
Fold tent up neatly laying the tent and
legs on top of each other.
Roll tent up.
Pack the dry and clean inatable tent
into protective cover.
Ensure area is clear of persons.
Ensure area is dry and clean.
Unscrew all valves to deate tent.
The below items are included to assist with ination and are included in product package.
Remove stakes and guide ropes or
detach sandbags.
Remove all air from the tubes.
EMX ALPHA INSTRUCTIONS
Deflation Instructions
WARNING READ INSTRUCTIONS CAREFULLY BEFORE USE
1.
4.
2.
5.
3.
IMPORTANT NOTES:
• Check the wind and weather conditions before
commencing construction.
• Ensure you have the correct ground xings for
your application.
• For safety reasons it is recommended that 2
persons set up any Inatable Tent.
• Ensure area is free from any sharp objects &
overhead objects.
• In high winds or storms the inatable should
be deated and stowed away.
• Green guide ropes should be used in
moderate to strong wind conditions.
• Do not touch the over
pressure valve system
Included Items
NOT Included Items
www.extremecanopy.com [email protected] [phone]