Extremis Sticks User manual

Sticks

IMPORTANT! RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY.

Table of contents 1/2
Mounting kit 
Assembly Sticks 
Assembly extra weight 
Assembly Sticks with Led 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.

Table of contents 2/2
Assembly connection piece 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Assembly floor fastening 
Warnings - Text instructions -
Maintenance 

5
6 x screw 4x20
4 x screw 3,9 x 38
Mounting kit to fix feet
to the rubber bases
Mounting kit STI150 to fix extra
weight to the base
Mounting kit
6 x Foot

6
2.
Sticks
5’
6 x screw 4x20
Outer holes
outdoor use, more
stability
Inner holes
indoor use, less
visibility
ab
6 x Foot
1. Go to page 13 if you want to assemble the extra weight 

7
2.
Always use gloves to assemble the rods

8
10’
6 x screw 4x20
Outer holes
outdoor use, more
stability
Inner holes
indoor use, less
visibility
ab
Sticks with Led
6 x Foot
1. Go to page 14 if you want to assemble the extra weight 

9
2.
b
a
Connect all bases

10
3.

11
4.
5.
Screw the sealing cap onto the male
connector for the last base
Attach the power supply to the
first base

12
6.
Always use gloves to assemble the rods
1 x power supply = max. 9 bases
1 x power supply + connection cable 1m = max. 8 bases
1 x power supply + connection cable 4m = max. 6 bases
1 x power supply + connection cable 9m = max. 4 bases

13
1.
2.
5’
Extra weight
Remove all feet
In case of Led, push all the cables deep into
the recesses

14
3.
STI150
4 x screw 3,9 x 38

15
1.
2.
Connection piece

16
1.
ø 6 mm
2.
Floor fastening
Drill a ø6 mm hole through the center of the base

17
3.
4.
ø 6 mm, L 80 mm

18
5.
Always use gloves to assemble the rods

19
Warnings
Text instructions
Maintenance
Warnings 
Assembly text instructions 
Maintenance 

20
General
• Do not use any sharp tools to open the packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Not grafitti proof.
• To avoid danger of suocation, keep plastic bags away from babies
and children.
• Colors can dier over years and from batch to batch.
Product
• Anchoring the product has to be done by qualified people.
• For anchoring: use suitable bolts or screws from a specialized store
depending on the material your terrace is made of.
• We consequently recommend that you thoroughly dust or rinse the
rods before inserting them into the bases to reduce these fibres to a
minimum.
• Do not touch the fiberglass rods with your bare hands. Always use
gloves to assemble Sticks. During the production process tiny glass
fibers may come loose and could stick on the rods. In case of skin
contact they may cause slight irritation. We consequently recommend
that you thoroughly dust or rinse the rods beofre inserting them into
the bases to reduce these fibres to a minimum.
• Do not allow anyone to use the rods for playing or jousting. This may
cause injuries.
• Because of the specific characteristics of the production process of
fiberglass, colors can only be reproduced approximatively and color
dierences may occur. This is the case for both standard colors as for
colors upon request.
• Rubberwood bases are not suitable for outdoor use.
• When using the Sticks high up or in windy places, we advise you to
Warnings