Eyedro E5B-M-E3 User manual

Quick Start Guide
3-Phase
Electricity Monitoring System
with Wireless Mesh connectivity
Model: E5B-M-E3 /
E5B-M-E3-SUB
For applications not exceeding
600VAC
Before Getting Started
This Quick Start Guide provides very high level
installation instructions. Detailed installation in-
structions are available in the Product Guide at
eyedro.com/support
This product is intended for indoor use only
Installation may require the cover of the main electrical panel to
be removed while some wires are still electrified. Even when the
main breaker has been turned ‘OFF’ certain areas of the panel
may still be dangerous and carry the risk of shock, burn, and elec-
trocution. Installation should be performed by a qualified electri-
cian. DO NOT attempt installation unless you know where
electrified areas within the panel are.
Notes:
1. Always use the AC power adapter that came with your
E5B-M-E3(-SUB) system.
2. Do not plug your Eyedro power adapter into an Uninterruptible
Power Supply (UPS) as this will result in incorrect measure-
ments.
3. The AC power adapter must be powered via a circuit
that is downstream of the panel where the current sensors are
installed.
Visit eyedro.com for any
questions or comments.
We value your feedback.
Online Support Resources
Visit eyedro.com/support for online product setup
wizard, user manuals, videos, and various support
resources
Limited One Year Warranty
Full warranty details are available in the Product
Guide at eyedro.com/support.
Important: This product contains no user serviceable
components. Do not attempt to open the case of the
unit or tamper with the internal components. Doing so
will void the product warranty.
eyedro.com/support

Quantity Description
A1Eyedro module (3 port)
B3
200A current sensor.
Note: Sensors NOT included
with –SUB models
C16VAC power adapter
1. Verify Package Contents 3. Install Hardware
3.1 Install current sensors on the line1 conductor of
the circuit(s) to be monitored.
1Line/Live/Hot conductor(s)
3.2 Connect sensors and power adapter to the Eyedro
module.
Copyright © 2023, Eyedro Green Solutions Inc.
2. Record Serial Number:
(located under barcode on module)
_ _ _ - _ _ _ _ _
4. Create a MyEyedro User Account
4.1 Go to my.eyedro.com to create your online
account (or log in if you have an existing account).
4.2 Add the device to your user account:
go to Configuration, select Devices then enter the
serial number you recorded in Step 2.
4.3 ENJOY! Log into MyEyedro as often as you like to
view your electricity consumption.
4.4 For more details about the MyEyedro cloud service,
review the MyEyedro User Guide located at
eyedro.com/support