Eyedro E5B-M-T2 User manual

Quick Start Guide
Temperature Monitoring System
with Wireless Mesh connectivity
Model: E5B-M-T2
Before Getting Started
This Quick Start Guide provides very
high level installation instructions. De-
tailed installation instructions are availa-
ble in the Product Guide at
eyedro.com/support
This product is intended for indoor use only
Online Support Resources
Visit eyedro.com/support for online product setup
wizard, user manuals, videos, and various support
resources
Limited One Year Warranty
Full warranty details are available in the Product
Guide at eyedro.com/support.
Important: This product contains no user serviceable
components. Do not attempt to open the case of the
unit or tamper with the internal components. Doing so
will void the product warranty.
eyedro.com/support
Visit eyedro.com for any
questions or comments.
We value your feedback.

Quantity Description
A1Eyedro temperature module
B2Thermocouple(s)
C15VDC power adapter
3.1 Place the tip of the thermocouple in direct contact
with the surface to measure the temperature.
• Optionally, apply thermal paste or thermal padding
between the surface and the thermocouple tip.
3.2 Connect thermocouple cables and power adapter to
the Eyedro module.
1. Verify Package Contents 3. Install Hardware
Copyright © 2023, Eyedro Green Solutions Inc.
2. Record Serial Number:
(located under barcode on module)
_ _ _ - _ _ _ _ _
4. Create a MyEyedro User Account
4.1 Go to my.eyedro.com to create your online
account (or log in if you have an existing account).
4.2 Add the device to your user account:
go to Configuration, select Devices then enter the
serial number you recorded in Step 2.
4.3 ENJOY! Log into MyEyedro as often as you like to
view your electricity consumption.
4.4 For more details about the MyEyedro cloud service,
review the MyEyedro User Guide located at
eyedro.com/support